Technical-scale biophotovoltaics for long-term photo-current generation from Synechocystis sp. PCC6803

Biophotovoltaics: Recent advances and perspectives

Biophotovoltaics (BPV) is a clean power generation technology that uses self-renewing photosynthetic microorganisms to capture solar energy and generate electrical current. Although the internal quantum efficiency of charge separation in photosynthetic microorganisms is very high, the inefficient electron transfer from photosystems to the extracellular electrodes hampered the electrical outputs of BPV systems. This review summarizes the approaches that have been taken to increase the electrical outputs of BPV systems in recent years. These mainly include redirecting intracellular electron transfer, broadening available photosynthetic microorganisms, reinforcing interfacial electron transfer and design high-performance devices with different configurations. Furthermore, three strategies developed to extract photosynthetic electrons were discussed. Among them, the strategy of using synthetic microbial consortia could circumvent the weak exoelectrogenic activity of photosynthetic microorganisms and the cytotoxicity of exogenous electron mediators, thus show great potential in enhancing the power output and prolonging the lifetime of BPV systems. Lastly, we prospected how to facilitate electron extraction and further improve the performance of BPV systems.

Solar-powered multi-organism symbiont mimic system for beyond natural synthesis of polypeptides from CO2 and N2

Developing artificial symbionts beyond natural synthesis limitations would bring revolutionary contributions to agriculture, medicine, environment, etc. Here, we initiated a solar-driven multi-organism symbiont, which was assembled by the CO₂ fixation module of Synechocystis sp., N₂ fixation module of Rhodopseudomonas palustris, biofunctional polypeptides synthesis module of Bacillus licheniformis, and the electron transfer module of conductive cationic poly(fluorene-co-phenylene) derivative. The modular design broke the pathway to synthesize γ-polyglutamic acid (γ-PGA) using CO₂ and N₂, attributing to the artificially constructed direct interspecific substance and electron transfer. So, the intracellular ATP and NADPH were enhanced by 69 and 30%, respectively, and the produced γ-PGA was enhanced by 104%. The strategy was further extended to produce a commercial antibiotic of bacitracin A. These achievements improve the selectivity and yield of functional polypeptides with one click by CO₂ and N₂, and also provide an innovative strategy for creating photosynthetic systems on demand.

Utilizing Cyanobacteria in Biophotovoltaics: An Emerging Field in Bioelectrochemistry

Anthropogenic global warming is driven by the increasing energy demand and the still dominant use of fossil energy carriers to meet these needs. New carbon-neutral energy sources are urgently needed to solve this problem. Biophotovoltaics, a member of the so-called bioelectrochemical systems family, will provide an important piece of the energy puzzle. It aims to harvest the electrons from sunlight-driven water splitting using the natural oxygenic photosystem (e.g., of cyanobacteria) and utilize them in the form of, e.g., electricity or hydrogen. Several key aspects of biophotovoltaics have been intensively studied in recent years like physicochemical properties of electrodes or efficient wiring of microorganisms to electrodes. Yet, the exact mechanisms of electron transfer between the biocatalyst and the electrode remain unresolved today. Most research is conducted on microscale reactors generating small currents over short time-scales, but multiple experiments have shown biophotovoltaics great potential with lab-scale reactors producing currents over weeks to months. Although biophotovoltaics is still in its infancy with many open research questions to be addressed, new promising results from various labs around the world suggest an important opportunity for biophotovoltaics in the decades to come. In this chapter, we will introduce the concept of biophotovoltaics, summarize its recent key progress, and finally critically discuss the potentials and challenges for future rational development of biophotovoltaics.

Self-Enclosed Bio-Photoelectrochemical Cell in Succulent Plants

Harvesting an electrical current from biological photosynthetic systems (live cells or isolated complexes) is typically achieved by immersion of the system into an electrolyte solution. In this study, we show that the aqueous solution found in the tissues of succulent plants can be used directly as a natural bio-photo electrochemical cell. Here, the thick water-preserving outer cuticle of the succulent Corpuscularia lehmannii serves as the electrochemical container, the inner water content as the electrolyte into which an iron anode and platinum cathode are introduced. We produce up to 20 μA/cm² bias-free photocurrent. When 0.5 V bias is added to the iron anode, the current density increases ∼10-fold, and evolved hydrogen gas can be collected with a Faradaic efficiency of 2.1 and 3.5% in dark or light, respectively. The addition of the photosystem II inhibitor 3-(3,4-dichlorophenyl)-1,1-dimethylurea inhibits the photocurrent, indicating that water oxidation is the primary source of electrons in the light. Two-dimensional fluorescence measurements show that NADH and NADPH serve as the major mediating electron transfer molecules, functionally connecting photosynthesis to metal electrodes. This work presents a method to simultaneously absorb CO₂ while producing an electrical current with minimal engineering requirements.

Trichodesmium erythraeum produces a higher photocurrent than other cyanobacterial species in bio-photo electrochemical cells

The increase in world energy consumption, and the worries from potential future disasters that may derive from climate change have stimulated the development of renewable energy technologies. One promising method is the utilization of whole photosynthetic cyanobacterial cells to produce photocurrent in a bio-photo electrochemical cell (BPEC). The photocurrent can be derived from either the respiratory or photosynthetic pathways, via the redox couple NADP⁺/NADPH mediating cyclic electron transport between photosystem I inside the cells, and the anode. In the past, most studies have utilized the fresh-water cyanobacterium Synechocystis sp. PCC 6803 (Syn). Here, we show that the globally important marine cyanobacterium Trichodesmium erythraeum flourishing in the subtropical oceans can provide improved currents as compared to Syn. We applied 2D-fluorescence measurements to detect the secretion of NADPH and show that the resulting photocurrent production is enhanced by increasing the electrolyte salinity, Further enhancement of the photocurrent can be obtained by the addition of electron mediators such as NAD⁺, NADP⁺, cytochrome C, vitamin B1, or potassium ferricyanide. Finally, we produce photocurrent from additional cyanobacterial species: Synechocystis sp. PCC6803, Synechococcus elongatus PCC7942, Acaryochloris marina MBIC 11017, and Spirulina, using their cultivation media as electrolytes for the BPEC.

Figures of Merit for Photocatalysis: Comparison of NiO/La-NaTaO3 and Synechocystis sp. PCC 6803 as a Semiconductor and a Bio-Photocatalyst for Water Splitting

While photocatalysis is considered a promising sustainable technology in the field of heterogeneous catalysis as well as biocatalysis, figures of merit (FOM) for comparing catalytic performance, especially between disciplines, are not well established. Here, photocatalytic water splitting was conducted using a semiconductor (NiO/La-NaTaO3) and a bio-photocatalyst (Synechocystis sp. PCC 6803) in the same setup under similar reaction conditions, eliminating the often ill-defined influence of the setup on the FOMs obtained. Comparing the results enables the critical evaluation of existing FOMs and a quantitative comparison of both photocatalytic systems. A single FOM is insufficient to compare the photocatalysts, instead a combination of multiple FOMs (reaction rate, photocatalytic space time yield and a redefined apparent quantum yield) is superior for assessing a variety of photocatalytic systems.

A system-oriented strategy to enhance electron production of Synechocystis sp. PCC6803 in bio-photovoltaic devices: experimental and modeling insights

Bio-photovoltaic devices (BPVs) harness photosynthetic organisms to produce bioelectricity in an eco-friendly way. However, their low energy efficiency is still a challenge. A comprehension of metabolic constraints can result in finding strategies for efficiency enhancement. This study presents a systemic approach based on metabolic modeling to design a regulatory defined medium, reducing the intracellular constraints in bioelectricity generation of Synechocystis sp. PCC6803 through the cellular metabolism alteration. The approach identified key reactions that played a critical role in improving electricity generation in Synechocystis sp. PCC6803 by comparing multiple optimal solutions of minimal and maximal NADH generation using two criteria. Regulatory compounds, which controlled the enzyme activity of the key reactions, were obtained from the BRENDA database. The selected compounds were subsequently added to the culture media, and their effect on bioelectricity generation was experimentally assessed. The power density curves for different culture media showed the BPV fed by Synechocystis sp. PCC6803 suspension in BG-11 supplemented with NH₄Cl achieved the maximum power density of 148.27 mW m^-2. This produced power density was more than 40.5-fold of what was obtained for the BPV fed with cyanobacterial suspension in BG-11. The effect of the activators on BPV performance was also evaluated by comparing their overpotential, maximum produced power density, and biofilm morphology under different conditions. These findings demonstrated the crucial role of cellular metabolism in improving bioelectricity generation in BPVs.