Investigation of the effect of Ni and Cu variant MOF-74 in the Polydimethylsiloxane (PDMS)-based Mixed Matrix Membranes (MMMs) for efficient gas separation applications

Mixed matrix membranes (MMMs) containing metal-organic frameworks (MOFs) have been an emerging and promising membrane technology to contribute to different gas separation applications including carbon dioxide (CO2) and oxygen (O2) separation, because of their large surface areas and distinctive gas adsorption features. In this work, the fabrication process of Polydimethylsiloxane (PDMS)-based MMMs was reported, in which 0.5 to 2 wt.% of each type of (Cu, Ni)-based MOF-74 variants were incorporated into a PDMS matrix in order to achieve high CO2/N2, O2/N2, and CO2/O2 separation efficiency. These MMMs and their nanofillers (MOF-74) were extensively characterized using scanning electron microscopy (SEM) along with Energy Dispersive X-Ray (EDX) mapping, X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), a single gas permeation testing system, and an ultimate tensile strength testing (UTS) unit in order to gain insight into their properties in relation to their gas separation performance. The 1 wt.% of both (Cu and Ni)-MOF-74@PDMS were selected as the most optimum MMMs due to their uniform morphology and enhanced tensile strength, which exhibited high CO2 permeabilities of 4432 Barrer (37.9% increase) and 4288 Barrer (33.5% increase), respectively. Furthermore, in the case of 1 wt.% Ni-MOF-74@PDMS, the CO2/N2, O2/N2, and CO2/O2 selectivities were also enhanced to 36.2 (141.6% increase), 3.2 (21.9% increase), and 11.25 (98.1% increase), respectively. While, in the case of 1 wt.% Cu-MOF-74@PDMS the CO2/N2 and O2/N2 selectivities showed an increment up-to 94.7 (531.5% increase) and 6.47 (145% increase), respectively, Whereas, at 0.5 wt.%, Cu-MOF-74@PDMS showed the best CO2/O2 selectivity of 25.26 (344.7% increase).

Utilization of Physical Anisotropy in Metal-Organic Frameworks via Postsynthetic Alignment Control with Liquid Crystal

Metal-organic frameworks (MOFs) represent crystalline materials constructed from combinations of metal and organic units to often yield anisotropic porous structures and physical properties. Postsynthetic methods to align the MOF crystals in bulk remain scarce yet tremendously important to fully utilize their structure-driven intrinsic properties. Herein, we present an unprecedented composite of liquid crystals (LCs) and MOFs and demonstrate the use of nematic LCs to dynamically control the orientation of MOF crystals with exceptional order parameters (as high as 0.965). Unique patterns formed through a facile multidirectional alignment of MOF crystals exhibit polarized fluorescence with the fluorescence intensity of a pattern dependent on the angle of a polarizer, offering potential use in various optical applications such as an optical security label. Further, the alignment mechanism indicates that the method is applicable to numerous combinations of MOFs and LCs, which include UV polymerizable LC monomers used to fabricate free-standing composite films.

Effect of modulator ligands on the growth of Co2(dobdc) nanorods

Control over the size, shape, uniformity, and external surface chemistry of metal-organic framework nanocrystals is important for a wide range of applications. Here, we investigate how monotopic modulators that mimic the coordination mode of native bridging ligands affect the growth of anisotropic Co2(dobdc) (dobdc4- = 2,5-dihydroxy-1,4-benzenedicarboxylic acid) nanorods. Through a combination of transmission electron microscopy (TEM) and nuclear magnetic resonance spectroscopy (NMR) studies, nanorod diameter was found to be strongly correlated to the acidity of the modulator and to the degree of modulator incorporation into the nanorod structure. Notably, highly acidic modulators allowed for the preparation of sub-10 nm nanorods, a previously elusive size regime for the M2(dobdc) family. More broadly, this study provides new insights into the mechanism of modulated growth of metal-organic framework nanoparticles.

Polydimethylsiloxane/Magnesium Oxide Nanosheet Mixed Matrix Membrane for CO2 Separation Application

Carbon dioxide (CO₂) concentration is now 50% higher than in the preindustrial period and efforts to reduce CO₂ emission through carbon capture and utilization (CCU) are blooming. Membranes are one of the attractive alternatives for such application. In this study, a rubbery polymer polydimethylsiloxane (PDMS) membrane is incorporated with magnesium oxide (MgO) with a hierarchically two-dimensional (2D) nanosheet shape for CO₂ separation. The average thickness of the synthesized MgO nanosheet in this study is 35.3 ± 1.5 nm. Based on the pure gas separation performance, the optimal loading obtained is at 1 wt.% where there is no observable significant agglomeration. CO₂ permeability was reduced from 2382 Barrer to 1929 Barrer while CO₂/N₂ selectivity increased from only 11.4 to 12.7, and CO₂/CH₄ remained relatively constant when the MMM was operated at 2 bar and 25 °C. Sedimentation of the filler was observed when the loading was further increased to 5 wt.%, forming interfacial defects on the bottom side of the membrane and causing increased CO₂ gas permeability from 1929 Barrer to 2104 Barrer as compared to filler loading at 1 wt.%, whereas the CO₂/N₂ ideal selectivity increased from 12.1 to 15.0. Additionally, this study shows that there was no significant impact of pressure on separation performance. There was a linear decline of CO₂ permeability with increasing upstream pressure while there were no changes to the CO₂/N₂ and CO₂/CH₄ selectivity.

Probing growth of metal-organic frameworks with X-ray scattering and vibrational spectroscopy

Nucleation and crystallization arising from liquid to solid phase are involved in a multitude of processes in fields ranging from materials science to biology. Controlling the thermodynamics and kinetics of growth is advantageous to help tune the formation of complex morphologies. Here, we harness wide-angle X-ray scattering and vibrational spectroscopy to elucidate the mechanism for crystallization and growth of the metal-organic framework Co-MOF-74 within microscopic volumes enclosed in a capillary and an attenuated total reflection microchip reactor. The experiments reveal molecular and structural details of the growth processes, while the results of plane wave density functional calculations allow identification of lattice and linker modes in the formed crystals. Synthesis of the metal-organic framework with microscopic volumes leads to monodisperse and micron-sized crystals, in contrast to those typically observed under bulk reaction conditions. Reduction in the volume of reagents within the microchip reactor was found to accelerate the reaction rate. The coupling of spectroscopy with scattering to probe reactions in microscopic volumes promises to be a useful tool in the synthetic chemist's kit to understand chemical bonding and has potential in designing complex materials.

Fast catalytic transfer hydrogenation of phenol to cyclohexanol over urea modified Ni@CN nanoparticles

The Ni@CN-450 catalyst prepared via direct pyrolysis of Ni-MOF-74(N) exhibited superior catalytic activity in catalytic transfer hydrogenation.

Breathing-Assisted Selective Adsorption of C8 Alkyl Aromatics in Zn-Based Metal-Organic Frameworks

The breathing phenomenon in metal-organic frameworks (MOFs) has revealed supramolecular host-guest interactions that could be beneficial for chemical separation in numerous industrial applications. The cost-effective purification of C₈ alkyl aromatics such as o-xylene, m-xylene, p-xylene, and ethylbenzene remains challenging owing to their similar molecular structures, boiling points, kinetic diameters, polarities, etc. Herein, we report two Zn-based pillar-bilayered MOFs, denoted [Zn₂ (aip)₂ (pillar)] (aip=5-aminoisophthalic acid; pillar: bpy=4,4'-bipyridine or bpe=1,2-bis(4-pyridyl)ethane) that exhibit a breathing effect depending on the adsorbed guest molecules. Guest-dependent sorption studies in organic solvents such as N,N-dimethylformamide, methanol, benzene, and water vapor display reversible structural flexibility through the breathing effect in both framework compounds. The experiments conducted on C₈ -alkyl aromatics resulting in both MOF compounds can access these isomers in the shrunken pores, and thereby expand the pore size by framework breathing. In C₈ binary mixtures, these Zn-MOFs exhibit selective sorption properties based on the different interactions between guest C₈ aromatics and the framework structure.

Shaping of a Metal-Organic Framework-Polymer Composite and Its CO2 Adsorption Performances from Humid Indoor Air

Diamine-functionalized metal-organic frameworks (MOFs) are known as desirable adsorbents that can capture CO₂ even at low pressures, but the humidity instability of bare MOF powders as well as their shaping have not yet adequately addressed for practical applications. Herein, we report an effective synthetic strategy for fabricating millimeter-sized MOF/poly(vinylidene fluoride) (PVDF) composite beads with different amounts of PVDF binders (30, 40, and 50 wt %) via a phase inversion method, followed by the postfunctionalization of 1-ethylpropane-1,3-diamine (epn). Compared with the pristine MOF powder, the diamine-grafted bead, epn-MOF/PVDF40, upon mixing with 40% binder polymers, exhibited a superior long-term performance without structural collapse for up to 1 month. The existence of the hydrophobic PVDF polymer in the composite material is responsible for such durability. This work provides a promising preparative route toward developing stable and shaped MOFs for the removal of indoor CO₂.