Optimizing tenderness of M. Semitendinosus steak for elderly people with the combination of ficin and sous-vide cooking

This study aimed to evaluate the sous-vide cooking and ficin treatment effects on the tenderness of beef steak and optimize it for the elderly using response surface methodology (RSM). The M. semitendinosus (ST) from Chikso cattle was shaped into 5 × 5 × 2.54 cm pieces. Ficin solution was injected into the ST steak at 10% of the meat weight, and sous-vide cooked in a water bath at 65 °C for 6 or 12 h. As ficin concentration increased, L*- and a*-value, shear force, and hardness decreased, while soluble peptides increased (P < 0.05). As cooking time increased, cooking loss and collagen solubility of the steak increased (P < 0.05). An interaction effect between ficin and sous-vide cooking was found in L*- and a*-value, shear force, hardness, and soluble peptides (P < 0.05). A model to optimize the hardness for elderly people was established (R2 = 0.7991). Optimization conditions by RSM were 0.86 U/L with 8.87 h (23 N/cm3) for tooth intake (grade 1), 16.31 U/L with 13.24 h (3 N/cm3) for gums intake (grade 2), according to KS H 4897 and Universal Design Foods concept for the elderly. These optimized conditions enable the production of customized products tailored to the oral conditions of elderly people.

Valorization of agro-industrial residues using Aspergillus heteromorphus URM0269 for protease production: Characterization and purification

This study aimed to produce, characterize and purify a protease from Aspergillus heteromorphus URM0269. After production by solid fermentation of wheat bran performed according to a central composite design, protease was characterized in terms of biochemical, kinetic, and thermodynamic parameters for further purification by chromatography. Proteolytic activity achieved a maximum value of 57.43 U/mL using 7.8 g of wheat bran with 40 % moisture. Protease displayed high stability in the pH and temperature ranges of 5.0-10.0 and 20-30 °C, respectively, and acted optimally at pH 7.0 and 50 °C. The enzyme, characterized as a serine protease, followed Michaelis-Menten kinetics with a maximum reaction rate of 140.0 U/mL and Michaelis constant of 11.6 mg/mL. Thermodynamic activation parameters, namely activation Gibbs free energy (69.79 kJ/mol), enthalpy (5.86 kJ/mol), and entropy (-214.39 J/mol.K) of the hydrolysis reaction, corroborated with kinetic modeling showing high affinity for azocasein. However, thermodynamic parameters suggested a reversible mechanism of unfolding. Purification by chromatography yielded a protease purification factor of 7.2, and SDS-PAGE revealed one protein band with a molecular mass of 14.7 kDa. Circular dichroism demonstrated a secondary structure made up of 45.6 % α-helices. These results show the great potential of this protease for future use in the industrial area.

SCREENING OF ASPERGILLUS FUNGI FOR EXTRA CELLULAR PROTEASE AND COLLAGENASE PRODUCTION

Protease and collagenase are the most important enzymes used for the processing of meat raw materials. In the meat industry, proteolytic enzymes are used to accelerate the maturation of meat and increase its yield. The use of enzyme preparations in meat processing makes it possible to rationally use meat raw materials, intensify technological processes, improve quality and expand the range of products. Collagenase, unlike protease, acts on those connective proteins of meat raw materials that determine its stiffness, breaking down hard-hydrolyzable and non-digestible collagen. The aim of this study was selection of strains of industrially valuable micromycetes from the collection of micromycetes that have the ability to synthesize extracellular protease and collagenase and create a fungal association. A comparative characterization of 7 strains of micromycetes of the genus Aspergillus and Penicillium - potential producers of protease and collagenase enzymes, was carried out. A. awamori 16 and A. awamori 22 showed the highest clearance zones and was used for further studies. The clearance zones of casein of A. awamori 16 on day 5 were 22.8 mm, and collagen 20.8 mm, while the clearance zones of casein of A. awamori 22 were 20.1 mm, and collagen - 19.1 mm.

Ultrasound-Assisted Enzyme-Catalyzed Hydrolysis of Collagen to Produce Peptides With Biomedical Potential: Collagenase From Aspergillus terreus UCP1276

Ultrasound has been applied for varied purposes as it provides additional mechanical energy to a system, and is still profitable and straightforward, which are advantages for industrial applications. In this work, ultrasonic treatments were applied to purified collagenase fractions from a fermented extract by Aspergillus terreus UCP 1276 aiming to evaluate the potential effect on collagen hydrolysis. The physical agent was evaluated as an inductor of collagen degradation and consequently as a producer of peptides with anticoagulant activity. The sodium dodecyl sulphate-polyacrylamide gel electrophoresis analyses were also carried out to compare the hydrolysis techniques. The ultrasound (40 kHz, 47.4 W/L) processing was conducted under the same conditions of pH and temperature at different times. The ultrasound-assisted reaction was accelerated in relation to conventional processing. Collagenolytic activity was enhanced and tested in the presence of phenylmethanesulfonyl fluoride inhibitor. Underexposure, the activity was enhanced, reaching more than 72.0% of improvement in relation to the non-exposed enzyme. A period of 30 min of incubation under ultrasound exposure was enough to efficiently produce peptides with biological activity, including anticoagulation and effect on prothrombin time at about 60%. The results indicate that low-frequency ultrasound is an enzymatic inducer with likely commercial applicability accelerating the enzymatic reaction. Bioelectromagnetics. 2020;41:113-120. © 2019 Bioelectromagnetics Society.

A eukaryotic community succession based method for postmortem interval (PMI) estimation of decomposing porcine remains

Recent, short-term studies on porcine and human models (albeit with few replicates) demonstrated that the succession of the microbial community of remains may be used to estimate time since death. Using a porcine model (N=6) over an extended period of time (1703 ADD, or two months), this study characterized the eukaryote community of decomposing remains. Skin microbial samples were collected from the torso of each set of remains every day during the first week, on alternate days during the second week, and once a week for the remainder of the 60-day period; all collection intervals were recorded in accumulated degree days (ADD). The eukaryote community of each sample was determined using 18S ribosomal DNA (rDNA) MiSeq high throughput sequencing; data were analyzed in the Mothur pipeline (v1.39.5) and in IBM SPSS and R statistical packages. The relative abundance of eukaryote taxa across ADD/Days and an Analysis of Molecular Variance (AMOVA) indicated similarities between sequential ADD/Days, but significant differences in the eukaryote communities as broad stage 'milestones' of decomposition were reached. Fresh remains (0-57 ADD/0-2 Days; exhibiting a total body score (TBS) of 0-10) were characterized by the combined presence of Saccharomycetaceae, Debaryomycetaceae, Trichosporonaceae, Rhabditida, and Trichostomatia. During bloat and active decay (87-209 ADD/3-7 Days; exhibiting TBS of 11-20), Diptera was the most abundant eukaryotic taxa. During advanced decay stage (267-448 ADD/9-15 Days; exhibiting TBS of 21-25), Rhabditida was the most dominant eukaryote. Dry/skeletal remains (734-1703 ADD/26-61 Days; TBS≥26) were dominated by fungal families Dipodascaceae, Debaryomycetaceae, Trichosporonaceae, and Sporidiobolaceae. Using the family-level eukaryote taxonomic data for the entire study, random forest modelling explained 89.58% of the variation in ADD/Days, with a root mean square error (RMSE) of 177.55 ADD (≈6 days). Overall, these results highlight the importance of the microbial eukaryote community during the process of decomposition and in estimation of PMI.

Purification and characterization of neutral protease from Aspergillus oryzae Y1 isolated from naturally fermented broad beans

The strain Y1, with a notably high production of neutral protease, was isolated from naturally fermented broad beans and subsequently identified as Aspergillus oryzae, through the analysis of its morphology characteristics and 18S rDNA sequence. Naturally fermented broad beans are the main raw material in Sichuan broad-bean sauce. The neutral protease from Aspergillus oryzae Y1 was purified using ammonium sulphate precipitation and DEAE-Sepharose Fast Flow chromatography, which resulted in a 10.0-fold increase in the specific activity (2264.3 U/mg) and a recovery rate of 21%. The estimated molecular mass of the purified protease was approximately 45 kDa. The optimal pH and temperature of the purified protease were 7.0 and 55 °C, respectively. The heat resistance of the purified protease was significantly higher than the commercial protease. The effect of metal ions on the activity of the purified protease approximated that of commercial neutral protease. Furthermore, the maximum hydrolysis rate (Vmax) and apparent Michaelis-Menten constant (Km) values of the purified protease were 256.4103 μg/mL min and 20.0769 mg/mL, respectively. The purified protease had a higher affinity for the substrate than the commercial neutral protease. All the results suggest that this neutral protease exhibits the potential for application in industry due to its good resistance to high temperatures and wide range of acids and bases.