Three-dimensional cancer cell culture in high-yield multiscale scaffolds by shear spinning

Cell culture design for homogeneous proliferation of cells in three-dimensional nonwoven polymer scaffolds

The objective of this study is to establish strategies to uniformly proliferate cells in a three-dimensional nonwoven polyethylene terephthalate (PET)/ethylene vinyl alcohol (EVOH) scaffold by simple adjustments in seeding and culture methods and the scaffold design. The combined dynamic and static seeding (intermittent agitations at 300 rpm with 1 h interval) resulted in the highest seeding efficiency (71%) comparing to the static and continuous agitating seeding methods. Cell-attached scaffolds were cultivated under different conditions. The stirring culture permitted cells to proliferate to a significantly greater extent than the static or agitating cultures, although faster cell proliferation in the outer region of the scaffold was observed. Next, based on this observation, scaffolds were opened with holes to alleviate the cell aggregation. The effect of hole size and number of scaffolds on the distribution of cells proliferated in the scaffold was evaluated. Two of 1-mm holes showed to be an optimal adjustment to allow cells to proliferate in a homogeneous manner. After 14 days culture, both of the holes were filled by cells proliferated with a fourfold increase in the cell number. The cell viability in the scaffolds was also high upon evaluating the live/dead and 3[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) staining examinations. Different cell types of 3T3-L1, C3H/10T1/2, and KUM6 cells showed similar behavior of cell proliferation and distribution in the scaffold, indicating the applicability of the established procedure. It is concluded that the nonwoven PET/EVOH scaffold serves as a potential cell culture substrate for an efficient cell proliferation.

Cell repelling agar@paper interface assisted probing of the tumor spheroids infiltrating natural killer cells

Scaffold-based culture is one of the effective methods to resemble three-dimensional (3D) cells model in vitro. An agar@lens paper hybrid scaffold was prepared by one-pot dip-coating. The lens paper's cellulose fiber networks are the scaffold's backbone. The agar gel seized the gaps between the fibrous structures that can improve the paper scaffold's optical transparency and prevent cells from spreading on the scaffold. The SEM and light microscope images showed that the agar gel on the bottom of the paper and the cellulose fiber of the paper formed micro-well structures. Without staining, the cells growing on the agar@paper scaffold can be directly observed under a light microscope. Cells aggregated between the cellulose fibers and formed spheroids within 24 h. The cell spheroids can be non-enzymatically retrieved from the agar@paper scaffold because of the cell-repelling property of agar. The agar@paper scaffold was applied for co-culturing tumor cells (MDA-MB-231, DU 145) and natural killer cells (NKs, NK-92). Using the agar@paper scaffolds, the tumor-infiltrating NKs can be separated from floating NKs that did not attack the tumor spheroids. The effect of NKs infiltrating on tumor spheroids size was characterized. The results showed that NKs attacking the spheroids grown on agar@paper scaffold can be readily tracked because of the improved optical transparency. Higher NKs: tumor cells ratio resulted in a high percentage of tumor infiltrating NKs. The separated NKs can be further tested to reveal their biological characteristics. Both agar and lens paper is accessible for most biological labs, highlighting the potential of agar@paper scaffold in 3D culture.

Magnetic hyperthermia therapy in glioblastoma tumor on-a-Chip model

OBJECTIVE

To evaluate the magnetic hyperthermia therapy in glioblastoma tumor-on-a-Chip model using a microfluidics device.

METHODS

The magnetic nanoparticles coated with aminosilane were used for the therapy of magnetic hyperthermia, being evaluated the specific absorption rate of the magnetic nanoparticles at 300 Gauss and 305kHz. A preculture of C6 cells was performed before the 3D cells culture on the chip. The process of magnetic hyperthermia on the Chip was performed after administration of 20μL of magnetic nanoparticles (10mgFe/mL) using the parameters that generated the specific absorption rate value. The efficacy of magnetic hyperthermia therapy was evaluated by using the cell viability test through the following fluorescence staining: calcein acetoxymethyl ester (492/513nm), for live cells, and ethidium homodimer-1 (526/619nm) for dead cells dyes.

RESULTS

Magnetic nanoparticles when submitted to the alternating magnetic field (300 Gauss and 305kHz) produced a mean value of the specific absorption rate of 115.4±6.0W/g. The 3D culture of C6 cells evaluated by light field microscopy imaging showed the proliferation and morphology of the cells prior to the application of magnetic hyperthermia therapy. Fluorescence images showed decreased viability of cultured cells in organ-on-a-Chip by 20% and 100% after 10 and 30 minutes of the magnetic hyperthermia therapy application respectively.

CONCLUSION

The study showed that the therapeutic process of magnetic hyperthermia in the glioblastoma on-a-chip model was effective to produce the total cell lise after 30 minutes of therapy.