A Comparative Analysis of the ‘Green’ Techniques Applied for Polyphenols Extraction from Bioresources

Optimization of Phenolic Compounds Extraction from Aerial Parts of Fabiana punensis S. C. Arroyo by Ultrasound- and Microwave-Assisted Extraction

Fabiana punensis S. C. Arroyo is a subshrub or shrub that is indigenous to the arid and semiarid region of northern Argentina and is known to possess several medicinal properties. The objective of this study was to optimize the extraction conditions so as to maximize the yield of bioactive total phenolic compound (TPC) and flavonoids (F) of F. punensis' aerial parts by using non-conventional extraction methods, namely ultrasound-assisted extraction, UAE, and microwave-assisted extraction, MAE, and to compare the biological activities and toxicity of optimized extracts vs. conventional extracts, i.e., those gained by maceration. Response Surface Methodology (RSM) was used to apply factorial designs to optimize the parameters of extraction: solid-to-liquid ratio, extraction time, ultrasound amplitude, and microwave power. The experimental values for TPC and F and antioxidant activity under the optimal extraction conditions were not significantly different from the predicted values, demonstrating the accuracy of the mathematical models. Similar HPLC-DAD patterns were found between conventional and UAE- and MAE-optimized extracts. The main constituents of the extracts correspond to phenolic compounds (flavonoids and phenolic acids) and apigenin was identified. All extracts showed high scavenger capacity on ABTS•+, O2•- and H2O2, enabling the inhibition of the pro-inflammatory enzymes xanthine oxidase (XO) and lipoxygenase (LOX). They also showed an antimutagenic effect in Salmonella Typhimurium assay and cytotoxic/anti-proliferative activity on human melanoma cells (SKMEL-28). Toxicological evaluation indicates its safety. The results of this work are important in the development of efficient and sustainable methods for obtaining bioactive compounds from F. punensis for the prevention of chronic degenerative diseases associated with oxidative stress, inflammation, and DNA damage.

Green Approach for Synthesis of Silver Nanoparticles with Antimicrobial and Antioxidant Properties from Grapevine Waste Extracts

The present work aims to study the possibilities of developing silver nanoparticles using natural extracts of grape pomace wastes originating from the native variety of Fetească Neagră 6 Șt. This study focused on investigating the influence of grape pomace extract obtained by two different extraction methods (classical temperature extraction and microwave-assisted extraction) in the phytosynthesis process of metal nanoparticles. The total phenolic content of the extracts was assessed using the spectrophotometric method with the Folin-Ciocâlteu reagent, while the identification and quantification of specific components were conducted through high-performance liquid chromatography with a diode array detector (HPLC-DAD). The obtained nanoparticles were characterized by UV-Vis absorption spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM), along with assessing their antioxidant and antimicrobial properties against Gram-positive bacteria. The data collected from the experiments indicated that the nanoparticles were formed in a relatively short period of time (96 h) and, for the experimental variant involving the use of a 1:1 ratio (v/v, grape pomace extract: silver nitrate) for the nanoparticle phytosynthesis, the smallest crystallite sizes (from X-ray diffraction-4.58 nm and 5.14 nm) as well as spherical or semispherical nanoparticles with the lowest average diameters were obtained (19.99-23 nm, from TEM analysis). The phytosynthesis process was shown to enhance the antioxidant properties (determined using the DPPH assay) and the antimicrobial potential (tested against Gram-positive strains) of the nanoparticles, as evidenced by comparing their properties with those of the parent extracts; at the same time, the nanoparticles exhibited a selectivity in action, being active against the Staphylococcus aureus strain while presenting no antimicrobial potential against the Enterococcus faecalis strain.

Agave angustifolia Haw. Leaves as a Potential Source of Bioactive Compounds: Extraction Optimization and Extract Characterization

The leaves of Agave angustifolia Haw. are the main agro-waste generated by the mezcal industry and are becoming an important source of bioactive compounds, such as phenolic compounds, that could be used in the food and pharmaceutical industries. Therefore, the extraction and identification of these phytochemicals would revalorize these leaf by-products. Herein, maceration and supercritical carbon dioxide (scCO2) extractions were optimized to maximize the phenolic and flavonoid contents and the antioxidant capacity of vegetal extracts of A. angustifolia Haw. In the maceration process, the optimal extraction condition was a water-ethanol mixture (63:37% v/v), which yielded a total phenolic and flavonoid content of 27.92 ± 0.90 mg EAG/g DL and 12.85 ± 0.53 µg QE/g DL, respectively, and an antioxidant capacity of 32.67 ± 0.91 (ABTS assay), 17.30 ± 0.36 (DPPH assay), and 13.92 ± 0.78 (FRAP assay) µM TE/g DL. Using supercritical extraction, the optimal conditions for polyphenol recovery were 60 °C, 320 bar, and 10% v/v. It was also observed that lower proportions of cosolvent decreased the polyphenol extraction more than pressure and temperature. In both optimized extracts, a total of 29 glycosylated flavonoid derivatives were identified using LC-ESI-QTof/MS. In addition, another eight novel compounds were identified in the supercritical extracts, showing the efficiency of the cosolvent for recovering new flavonoid derivatives.

The Utilization of an Aloe Vera Rind By-Product: Deep Eutectic Solvents as Eco-Friendly and Recyclable Extraction Media of Polyphenolic Compounds

In this study, an optimized environmentally friendly procedure was employed to enhance the sustainable utilization of phenolic antioxidants derived from aloe vera rind by-products. The procedure involved the application of ultrasound-assisted extraction (UAE) in combination with deep eutectic solvents (DESs). Eleven different DESs and three conventional solvents were employed as extraction media for polyphenolic compounds. Choline chloride-citric acid (ChCl-CA) was selected as the most suitable extractant, considering its extraction efficiency in relation to the total phenolic content. The operating conditions of UAE were optimized and modeled by the use of response surface methodology in order to maximize the yield of total phenolics and antioxidant capacity. The optimal operational parameters for the UAE procedure were determined to be 16.5 min, 74% (v/v) DES in water, and a solvent-to-solid ratio equal to 192. HPLC analysis, which was performed on the optimum extract, revealed significant levels of phenolics present in the aloe rind. Efficient recovery of the extracted antioxidants was obtained by the use of solid-phase extraction (SPE) and polyamide cartridges. The ChCl-CA DES exhibited excellent recycling capability with a yield of over 90% through SPE. Finally, the greenness of the method was evaluated using the green AGREE and AGREEprep metrics. The results highlighted the sustainability and the greenness of the proposed extraction procedure for the aloe by-product.

Blueberry Pruning Wastes: From an Undervalued Agricultural Residue to a Safe and Valuable Source of Antioxidant Compounds for the Food Industry

Blueberry fruits have been widely explored for their rich composition of bioactive compounds with recognized health benefits. In contrast, blueberry pruning waste (BPW), generated during the pruning stages of blueberries, has been typically overlooked, even though it can represent a potential source of natural antioxidants. This study aims to characterize the value-added compounds extracted from BPW using green techniques, namely microwave-assisted and subcritical water extraction. The total phenolic content ranged from 157 ± 5 to 335 ± 12 mg GAE/g dw, while the radical scavenging activity determined by a DPPH assay varied from 223 ± 21 to 453 ± 21 mg Trolox equivalents/g dw. Additionally, to ensure the safe application of BPW and its extracts, a screening of pesticides and several environmental contaminants was conducted. Chlorpyrifos-methyl was quantified at a concentration of 4.27 µg/kg in a Bluecrop variety collected in 2019; however, none of the studied compounds were found in the extracts. Despite the presence of a pesticide, this level was below the maximum residue limits for blueberry crops. The results of this study demonstrated the potential of this agro-industrial residue as a natural source of bioactive compounds with high antioxidant activity for food industry applications.

Influence of Extraction Techniques and Solvents on the Antioxidant and Biological Potential of Different Parts of Scorzonera undulata

The genus Scorzonera has various medicinal values. Species belonging to this genus were traditionally used as drugs or in food. The current study aimed to determine the phytochemical composition, antioxidant activity, and biological properties of the tuber, leaf, and flower of Scorzonera undulata extracts, collected from the southwest of Tunisia. Phenolic compounds from the three parts were extracted using two solvents (water and ethanol) and two extraction techniques (maceration and ultrasound). The total phenolic content was measured by the Folin-Ciocalteu assay. Furthermore, the chemical composition of Scorzonera undulata extract was also investigated by the LC-ESI-MS method using phenolic acid and flavonoid standards. The variation of the extraction methods induced a variation in the real potentialities of the three parts in terms of bioactive molecules. However, the aerial part of S. undulata (leaves and flowers) showed, in general, the highest phenolic contents. Twenty-five volatile compounds have been detected by GC-MS in S. undulata extracts; among them, fourteen were identified before derivatization. The DPPH test showed that the aerial part of the plant has a higher antioxidant activity compared to the tuber (25.06% at 50 µg/mL for the leaf ethanolic extract obtained by ultrasound extraction). For most biological activities (anti-Xanthine, anti-inflammatory, and antidiabetic (alpha-amylase and alpha-glucosidase)), the aerial parts (flowers and leaves) of the plant showed the highest inhibition than tubers.

An Overview on the Use of Extracts from Medicinal and Aromatic Plants to Improve Nutritional Value and Oxidative Stability of Vegetable Oils

Oil oxidation is the main factor limiting vegetable oils' quality during storage, as it leads to the deterioration of oil's nutritional quality and gives rise to disagreeable flavors. These changes make fat-containing foods less acceptable to consumers. To deal with this problem and to meet consumer demand for natural foods, vegetable oil fabricators and the food industry are looking for alternatives to synthetic antioxidants to protect oils from oxidation. In this context, natural antioxidant compounds extracted from different parts (leaves, roots, flowers, and seeds) of medicinal and aromatic plants (MAPs) could be used as a promising and sustainable solution to protect consumers' health. The objective of this review was to compile published literature regarding the extraction of bioactive compounds from MAPs as well as different methods of vegetable oils enrichment. In fact, this review uses a multidisciplinary approach and offers an updated overview of the technological, sustainability, chemical and safety aspects related to the protection of oils.

The Disposition of Bioactive Compounds from Fruit Waste, Their Extraction, and Analysis Using Novel Technologies: A Review

Fruit waste contains several bioactive components such as polyphenols, polysaccharides, and numerous other phytochemicals, including pigments. Furthermore, new financial opportunities are created by using fruit ‘leftovers’ as a basis for bioactivities that may serve as new foods or food ingredients, strengthening the circular economy’s properties. From a technical standpoint, organic phenolic substances have become more appealing to industry, in addition to their application as nutritional supplements or functional meals. Several extraction methods for recovering phenolic compounds from fruit waste have already been published, most of which involve using different organic solvents. However, there is a growing demand for eco-friendly and sustainable techniques that result in phenolic-rich extracts with little ecological impact. Utilizing these new and advanced green extraction techniques will reduce the global crisis caused by fruit waste management. Using modern techniques, fruit residue is degraded to sub-zero scales, yielding bio-based commodities such as bioactive elements. This review highlights the most favorable and creative methods of separating bioactive materials from fruit residue. Extraction techniques based on environmentally friendly technologies such as bioreactors, enzyme-assisted extraction, ultrasound-assisted extraction, and their combination are specifically covered.

Recovery of Antioxidants from Tomato Seed Industrial Wastes by Microwave-Assisted and Ultrasound-Assisted Extraction

Tomato seed (TS) wastes are obtained in large amounts from the tomato processing industry. In this work, microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) of antioxidant compounds from TS were optimized by using response surface methodology. The effect of MAE and UAE main extraction parameters was studied on total phenolic content (TPC) and antioxidant activity (DPPH) responses. Antioxidant, structural, morphological, and thermal properties of MAE and UAE extracts were evaluated. A great influence of ethanol concentration was observed in both extraction methods. Optimal MAE conditions were determined as 15 min, 80 °C, 63% ethanol and 80 mL, with a desirability value of 0.914, whereas 15 min, 61% ethanol and 85% amplitude (desirability = 0.952) were found as optimal conditions for UAE. MAE extracts exhibited higher TPC and antioxidant activity values compared to UAE (1.72 ± 0.04 and 1.61 ± 0.03 mg GAE g TS⁻¹ for MAE and UAE, respectively). Thermogravimetric analysis (TGA) results suggested the presence of some high molecular weight compounds in UAE extracts. Chlorogenic acid, rutin and naringenin were identified and quantified by HPLC-DAD-MS as the main polyphenols found by MAE and UAE, showing MAE extracts higher individual phenolics content (1.11–2.99 mg 100 g TS⁻¹). MAE and UAE have shown as effective green techniques for extracting bioactive molecules with high antioxidant activity from TS with high potential to be scaled-up for valorizing of TS industrial wastes.

A green approach to phenolic compounds recovery from olive mill and winery wastes

The aim of this study was to evaluate the recovery of phenolic compounds from olive mill and winery wastes by conventional solid-liquid extraction (SLE) using water as the extraction solvent. The studied variables were extraction time (5-15 min), temperature (25-90 °C), solid-to-liquid ratio (1:10-1:100 (kg/L)), pH (3-10) and application of multiple extractions (1-3). The extraction efficiency was evaluated in terms of total phenolic content (TPC), determined by high performance liquid chromatography (HPLC-UV), but also from the recovery of some representative phenolic compounds. The optimized conditions were one extraction step, 10 min, 25 °C, 1:30 (kg/L), pH 5 for olive pomace, and one extraction step, 10 min, 70 °C, 1:100 (kg/L), pH 5 for winery residues. The extraction method is simple and suitable for scaling-up in industry, and the aqueous extracts are fully compatible with further purification schemes based on the use of membranes or resins. The optimized technique was applied to a set of different representative residues from olive mill and winery industries, to assess their suitability as sources for phenolic compounds recovery. The phenolic content in the extracts was evaluated by chromatographic analysis and by the Folin-Ciocalteu assay (FC). Furthermore, the antioxidant capacity was determined by 2,2-azinobis-3-etilbenzotiazolina-6-sulfonat (ABTS), 2,-diphenyl-1-picrylhydrazyl (DPPH) and ferric reducing antioxidant power (FRAP) assays. Because of their high contents in phenolic compounds and great antioxidant capacity, olive pomace and lees filters were identified as especially suited sources for phenolic compounds recovery.

Arnica Montana L. Supercritical Extraction Optimization for Antibiotic and Anticancer Activity

Arnica montana L. flower heads are known for their antioxidant, antimicrobial, and anticancer activity. The aim of this work was to optimize the process of supercritical CO₂ extraction, to achieve high extraction yield and high content of biologically active components, and to confirm the antimicrobial and anticancer activity of the extract. The influence of pressure and temperature on the total phenolic content, antioxidant activity, and proanthocyanidin content was evaluated. The pressure and temperature were found to be interdependent. A temperature of 60°C and a pressure of 30 MPa resulted in a high extraction yield, antioxidant activity and phenolic content. The content of proanthocyanidins was highest at a pressure between 18 and 24 MPa. The extracts inhibited three different microorganisms successfully; Staphylococcus aureus, Escherichia coli and Candida albicans, at concentrations ranging from 0.1 to 5.16 mg/ml and showed anticancer activity decrease up to 85% at a concentration of 0.5 mg/ml.

Carrageenan From Kappaphycus alvarezii (Rhodophyta, Solieriaceae): Metabolism, Structure, Production, and Application

Carrageenan is a polysaccharide derived from red algae (seaweed) with enormous economic potential in a wide range of industries, including pharmaceuticals, food, cosmetics, printing, and textiles. Carrageenan is primarily produced through aquaculture-based seaweed farming, with Eucheuma and Kappaphycus species accounting for more than 90% of global output. There are three major types of carrageenan found in red algae: kappa (κ)-, iota (ι)-, and lambda (λ)-carrageenan. Kappaphycus alvarezii is the most common kappa-carrageenan source, and it is primarily farmed in Asian countries such as Indonesia, the Philippines, Vietnam, and Malaysia. Carrageenan extracted from K. alvarezii has recently received a lot of attention due to its economic potential in a wide range of applications. This review will discuss K. alvarezii carrageenan in terms of metabolic and physicochemical structure, extraction methods and factors affecting production yield, as well as current and future applications.

Influence of the extraction method on the recovery of bioactive phenolic compounds from food industry by-products

Agro-foodindustries generate colossal amounts of non-edible waste and by-products, easily accessible as raw materials for up-cycling active phytochemicals. Phenolic compounds are particularly relevant in this field given their abundance in plant residues and the market interest of their functionalities (e.g. natural antioxidant activity) as part of nutraceutical, cosmetological and biomedical formulations. In "bench-to-bedside" achievements, sample extraction is essential because valorization benefits from matrix desorption and solubilization of targeted phytocompounds. Specifically, the composition and polarity of the extractant, the optimal sample particle size and sample:solvent ratio, as well as pH, pressure and temperature are strategic for the release and stability of mobilized species. On the other hand, current green chemistry environmental rules require extraction approaches that eliminate polluting consumables and reduce energy needs. Thus, the following pages provide an update on advanced technologies for the sustainable and efficient recovery of phenolics from plant matrices.

Green non-conventional techniques for the extraction of polyphenols from agricultural food by-products: A review

Food processing industry is accompanied with the generation of a great production of wastes and by-products exceptionally rich in bioactive compounds (especially phenolics), with antioxidant activity. The recovery of these health molecules constitutes a key point for the valorization of by-products, with the possibility of creating new ingredients to be used for the formulation of food and cosmetic products. One of the main limitations to reuse by-products is linked to the high cost to obtain bioactive compounds, consequently in order to exploit these resources commercially valuable it is necessary to develop innovative, economic and environmentally friendly extraction strategies. These extraction methods should be able to reduce petroleum solvents, energy consumption and chemical wastes, protecting both environment and consumers and ensuring safe and high-quality final products. The purpose of this review is to summarize current knowledge and applications of the new extraction techniques such as supercritical fluid extraction, pressurized liquid extraction, ultrasound assisted extraction applied to polyphenols extraction from agricultural food by-products. Particular attention has been paid to theoretical background, highlighting mechanisms and safety precautions. Authors concluded that relevant results of these techniques represent an opportunity to industrial scale-up, improving the extraction yields, minimizing time, costs and environmental impact.

Challenge of Utilization Vegetal Extracts as Natural Plant Protection Products

Natural plant protection products (known as biopesticides), derived from natural materials (plants, bacterial strains, and certain minerals) that can be used to control pests, are an alternative to plant protection chemicals (known as pesticides) due to certain advantages: less toxic to humans and the environment, no release/leaching of harmful residues, and usually much specific to the target pests. This review focuses on the systematization of information highlighting the main advantages related to the natural plant protection products used, the extractive methods of obtaining them, their physical-chemical analysis methodology, the specific constituents responsible for their pesticide effects, the mechanisms of action, and methods for direct application on vegetable crops or on seeds stored in warehouses, in order to eliminate the adverse effects occurred in the case of plant protection chemicals use. Special attention has been accorded to natural plant protection products from the spontaneous flora of Moldova (Romania’s macroeconomic region NE), which can be considered a resource of valuable secondary metabolites, especially in the form of vegetable essential oils, with biological effects and biopesticide routes of action. All presented information concludes that biopesticides can successfully replace the chemical plant protection products on small farms and especially in silos (seeds and cereals).

Olive Mill and Winery Wastes as Viable Sources of Bioactive Compounds: A Study on Polyphenols Recovery

In this study, the recovery of polyphenols from olive oil mill and winery waste was investigated. The performance of ultrasound assisted extraction (UAE), microwave assisted extraction (MAE), and pressurized liquid extraction (PLE) was assessed using ethanol-water mixtures, which are compatible with food, nutraceutical, and cosmetic applications. The extraction efficiency from olive pomace and lees samples was evaluated in terms of total polyphenol content (TPC), determined by high performance liquid chromatography (HPLC) and Folin-Ciocalteu assay. The effect of solvent composition, temperature, and time was analyzed by response surface methodology. Ethanol:water 50:50 (v/v) was found to be a suitable solvent mixture for both kinds of samples and all three extraction techniques. The performance of the extraction techniques was evaluated, under optimal experimental conditions, with a set of different representative samples of residues from olive oil and wine production. Overall, the best extraction efficiency for olive pomace residues was provided by MAE (ethanol:water 50:50 (v/v), 90 °C, 5 min), and for wine residues by PLE (ethanol:water 50:50 (v/v), 100 °C, 5 min, 1 cycle). However, the results provided by UAE (ethanol:water 50:50 (v/v), 30 min) were also suitable. Considering not only extraction performance, but also investment and operational costs, UAE is proposed for a future scaling up evaluation. Regarding olive pomace as a source for natural phenolic antioxidants, olive variety and climatic conditions should be taken into account, since both influence TPC in the extracts, while for winery residues, lees from red wines are more suitable than those from white wines.

Environmentally Friendly Methods for Flavonoid Extraction from Plant Material: Impact of Their Operating Conditions on Yield and Antioxidant Properties

The flavonoids are compounds synthesized by plants, and they have properties such as antioxidant, anticancer, anti-inflammatory, and antibacterial, among others. One of the most important bioactive properties of flavonoids is their antioxidant effect. Synthetic antioxidants have side toxic effects whilst natural antioxidants, such as flavonoids from natural sources, have relatively low toxicity. Therefore, it is important to incorporate flavonoids derived from natural sources in several products such as foods, cosmetics, and drugs. For this reason, there is currently a need to extract flavonoids from plant resources. In this review are described the most important parameters involved in the extraction of flavonoids by unconventional methods such as ultrasound, pressurized liquid extraction, mechanochemical, high hydrostatic pressure, supercritical fluid, negative pressure cavitation, intensification of vaporization by decompression to the vacuum, microwave, infrared, pulsed electric field, high-voltage electrical discharges, and enzyme-assisted extraction. There are no unified operation conditions to achieve high yields and purity. Notwithstanding, progress has been achieved in the development of more advanced and environmentally friendly methods of extraction. Although in literature are found important advances, a complete understanding of the extraction process in each of the unconventional techniques is needed to determine the thermodynamic and kinetic mechanisms that govern each of the techniques.

Life cycle assessment of polyphenols extraction processes from waste biomass

Waste biomass from forestry and wood processing industries is a source to obtain fine chemicals, and its processing is a good example of circular economy, but it generates secondary environmental impacts. The main objective of this study was to analyse the environmental performances of laboratory scale processes for polyphenols extraction from spruce bark by means of life cycle assessment (LCA) and to simulate and evaluate the scale-up possibilities of the most favourable alternative. The assessed extraction processes were: a classic Soxhlet extraction using ethanol as solvent (SE), a high-temperature extraction in 1% NaOH solution (NaOH-SLE) and an ultrasound assisted extraction process (UAE). The functional unit was 1 mg of extracted polyphenols, measured as gallic acid equivalents (mg GAE)/g spruce bark. The life cycle inventory has included specific laboratory scale operations and extraction processes (infrastructure and transport processes were not considered). Life cycle impact assessment was performed with ReCipe 2016 at midpoint. For all extraction processes, the environmental profiles were dominated by the electricity use for heating and this has generated the highest impacts in most of the impact categories, followed by the production and use of ethanol as solvent. For the ultrasound assisted extraction, a scale-up scenario has proven that by raising capacity to a 30 L extraction vessel and by changing the heating source to a biomass-fired boiler, environmental impacts may be greatly diminished. The paper discusses also the uncertainty of lab-scale generated data for LCA. A sensitivity analysis has proven that for this case, the energy efficiency of different lab-scale equipment induce acceptable degrees of uncertainty for the LCA results.

Encapsulation of Bioactive Compounds from Aloe Vera Agrowastes in Electrospun Poly (Ethylene Oxide) Nanofibers

Aloe Vera is an ancient medicinal plant especially known for its beneficial properties for human health, due to its bioactive compounds. In this study, nanofibers with antioxidant activity were successfully obtained by electrospinning technique with the addition of a natural Aloe Vera skin extract (AVE) (at 0, 5, 10 and 20 wt% loadings) in poly(ethylene oxide) (PEO) solutions. The successful incorporation of AVE into PEO was evidenced by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TGA) and antioxidant activity by 2,2-diphenyl-1-picrylhydrazyl radical scavenging (DPPH), 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging (ABTS) and ferric reducing power (FRAP) assays. The incorporation of AVE introduced some changes in the PEO/AVE nanofibers morphology showing bimodal diameter distributions for AVE contents in the range 10-20 wt%. Some decrease in thermal stability with AVE addition, in terms of decomposition onset temperature, was also observed and it was more evident at high loading AVE contents (10 and 20 wt%). High encapsulation efficiencies of 92%, 76% and 105% according to DPPH, FRAP and ABTS assays, respectively, were obtained at 5 wt% AVE content, retaining AVE its antioxidant capacity in the PEO/AVE electrospun nanofibers. The results suggested that the obtained nanofibers could be promising materials for their application in active food packaging to decrease oxidation of packaged food during storage.

Sweet Cherry Byproducts Processed by Green Extraction Techniques as a Source of Bioactive Compounds with Antiaging Properties

In the cosmetic industry, there is a continuous demand for new and innovative ingredients for product development. In the context of continual renovation, both cosmetic companies and customers are particularly interested in compounds derived from natural sources due to their multiple benefits. In this study, novel and green-extractive techniques (pressurized solvent, supercritical CO₂, and subcritical water extractions) were used to obtain three new extracts from sweet cherry stems, a byproduct generated by the food industry. The extracts were characterized by high-performance liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry (HPLC-ESI-QTOF-MS), and 57 compounds, mainly flavonoids but also organic and phenolic acids, fatty acids, and terpenes, were identified. After analytical characterization, a multistep screening approach, including antioxidant, enzymatic, and photoprotective cellular studies, was used to select the best extract according to its benefits of interest to the cosmetics industry. The extract obtained with supercritical CO₂ presented the best characteristics, including a wide antioxidant capacity, especially against lipid peroxyl and ^•OH free radicals, as well as relevant photoprotective action and antiaging properties, making it a potential new ingredient for consideration in the development of new cosmetics.

Bioactive Phenolic Compounds From Agri-Food Wastes: An Update on Green and Sustainable Extraction Methodologies

Phenolic compounds are broadly represented in plant kingdom, and their occurrence in easily accessible low-cost sources like wastes from agri-food processing have led in the last decade to an increase of interest in their recovery and further exploitation. Indeed, most of these compounds are endowed with beneficial properties to human health (e.g., in the prevention of cancer and cardiovascular diseases), that may be largely ascribed to their potent antioxidant and scavenging activity against reactive oxygen species generated in settings of oxidative stress and responsible for the onset of several inflammatory and degenerative diseases. Apart from their use as food supplements or as additives in functional foods, natural phenolic compounds have become increasingly attractive also from a technological point of view, due to their possible exploitation in materials science. Several extraction methodologies have been reported for the recovery of phenolic compounds from agri-food wastes mostly based on the use of organic solvents such as methanol, ethanol, or acetone. However, there is an increasing need for green and sustainable approaches leading to phenolic-rich extracts with low environmental impact. This review addresses the most promising and innovative methodologies for the recovery of functional phenolic compounds from waste materials that have appeared in the recent literature. In particular, extraction procedures based on the use of green technologies (supercritical fluid, microwaves, ultrasounds) as well as of green solvents such as deep eutectic solvents (DES) are surveyed.

Ultrasound-Assisted Extraction of Taxifolin, Diosmin, and Quercetin from Abies nephrolepis (Trautv.) Maxim: Kinetic and Thermodynamic Characteristics

Extraction behaviors of the 3 flavonoids taxifolin, diosmin, and quercetin have been investigated in Abies nephrolepis leaves and bark. The following operation parameters—ethanol volume fraction, liquid–solid ratio, temperature, ultrasound irradiation power and time, and ultrasound frequency—were varied to study their effect on the yield of the 3 flavonoids during extraction. The results showed that a low extraction efficiency occurred at 293.15 K due to slow kinetics, while the situation was significantly improved at 333.15 K. The kinetic data for the extraction yields of the 3 flavonoids achieved good fits by the first-order kinetic model. From the thermodynamic analysis results, we realized that the ultrasound-assisted extraction of taxifolin, diosmin, and quercetin from the leaves and bark of A. nephrolepis was a spontaneous and endothermic process in which the disorder increased (ΔG⁰ < 0, ΔH⁰ > 0, and ΔS⁰ > 0). According to the response surface methodology (RSM) analysis, under the optimal operation conditions (ethanol concentration of 50%, liquid–solid ratio of 20 mL/g, frequency of 45 kHz, extraction time of 39.25 min, ultrasound irradiation power of 160 W and temperature of 332.19 K), the total yield of the 3 flavonoids were 100.93 ± 4.01 mg/g from the leaves of A. nephrolepis (with 31.03 ± 1.51 mg/g, 0.31 ± 0.01 mg/g, 69.59 ± 2.57 mg/g for taxifolin, diosmin, and quercetin, respectively), and under the optimal operation conditions (ethanol concentration of 50%, liquid–solid ratio of 20 mL/g, frequency of 45 kHz, extraction time of 36.80 min, ultrasound irradiation power of 150 W and temperature of 328.78 K), 16.05 mg/g ± 0.38 mg/g were obtained from the bark of A. nephrolepis (with 1.44 ± 0.05 mg/g, 0.47 ± 0.01 mg/g, 14.14 ± 0.38 mg/g for taxifolin, diosmin, and quercetin, respectively), which were close to the prediction values.

Technology and Process Design for Phenols Recovery from Industrial Chicory (Chicorium intybus) Leftovers

Vegetal leftovers from the agro-food industry represent a huge source of primary and secondary metabolites, vitamin, mineral salts and soluble as well as insoluble fibers. Economic reports on the growth in the polyphenol market have driven us to focus our investigation on chicory (Chicorium intybus L.), which is one of the most popular horticultural plants in the world and a rich source of phenolic compounds. Ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE) and their simultaneous combination, using either ethanol/water or water alone (also sub-critical), have been investigated with the aim of designing a green and efficient extraction process. Higher total-polyphenol yields as well as dramatic reductions in extraction times and solvent consumption have been obtained under these conditions. ANOVA test for analyses of variance followed by the Tukey honestly significant difference (HSD) post-hoc test of multiple comparisons was used in the statistical analysis. MAE experiments performed with sub-critical water, and MW/US experiments with an ethanol solution have shown polyphenol recovery values of up to ~3 g of gallic acid equivalents (GAE) per kg of fresh material in only 15 min, while conventional extraction required 240 min to obtain the same result.

Pilot Scale Cavitational Reactors and Other Enabling Technologies to Design the Industrial Recovery of Polyphenols from Agro-Food By-Products, a Technical and Economical Overview

We herein provide an overview of the most recent multidisciplinary process advances that have occurred in the food industry as a result of changes in consumer lifestyle and expectations. The demand for fresher and more natural foods is driving the development of new technologies that may efficiently operate at room temperature. Moreover, the huge amount of material discarded by the agro-food production chain lays down a significant challenge for emerging technologies that can provide new opportunities by recovering valuable by-products and creating new applications. Aiming to design industrial processes, there is a need for pilot scale plants such as the 'green technologies development platform', which was established by the authors. The platform is made up of a series of multifunctional laboratories that are equipped with non-conventional pilot reactors, developed in direct collaboration with partner companies, in order to bridge the enormous gap between academia and industry via the large-scale exploitation of relevant research achievements. Selected key, enabling technologies for process intensification make this scale-up feasible. We make use of two selected examples, the grape and olive production chains, to show how cavitational reactors, which are based on high-intensity ultrasound and rotational hydrodynamic units, can assist food processing and the sustainable recovery of waste, to produce valuable nutraceuticals as well as colouring and food⁻beverage additives.

Green and Sustainable Separation of Natural Products from Agro-Industrial Waste: Challenges, Potentialities, and Perspectives on Emerging Approaches

New generations of biorefinery combine innovative biomass waste resources from different origins, chemical extraction and/or synthesis of biomaterials, biofuels, and bioenergy via green and sustainable processes. From the very beginning, identifying and evaluating all potentially high value-added chemicals that could be removed from available renewable feedstocks requires robust, efficient, selective, reproducible, and benign analytical approaches. With this in mind, green and sustainable separation of natural products from agro-industrial waste is clearly attractive considering both socio-environmental and economic aspects. In this paper, the concepts of green and sustainable separation of natural products will be discussed, highlighting the main studies conducted on this topic over the last 10 years. The principal analytical techniques (such as solvent, microwave, ultrasound, and supercritical treatments), by-products (e.g., citrus, coffee, corn, and sugarcane waste) and target compounds (polyphenols, proteins, essential oils, etc.) will be presented, including the emerging green and sustainable separation approaches towards bioeconomy and circular economy contexts.

Artichoke (Cynara cardunculus L. var. scolymus) waste as a natural source of carbonyl trapping and antiglycative agents

The role of polyphenolic compounds extractable from artichoke solid wastes in the formation of advanced glycation end products (AGEs) was studied. Outer bracts and stems were extracted using different water-ethanol mixtures and HPLC-DAD analyses indicated aqueous and hydro-alcoholic 20:80 stem extracts as the richest in polyphenols. The samples were characterized in their phenolic composition (using mass spectrometry) and antioxidant capacity. Antiglycative capacity was evaluated by in vitro BSA-sugars (glucose, fructose, and ribose) and BSA-methylglyoxal (MGO) tests, formation of Amadori products assay, direct glyoxal (GO) and MGO trapping capacity. Results indicated both extracts as effective inhibitors of fructosamine formation and antiglycative agents. In particular, aqueous extract showed the best activity in the systems containing glucose and fructose, differently from ethanolic extract, that was demonstrated able to better inhibit AGEs formation when ribose or MGO act as precursors. Ethanolic extract was also shown to be able to trap MGO and GO, with efficiency increasing after 24hours of incubation time. These activities are partially correlated with the antioxidant effect of the extract, as demonstrated by the scavenger capacity against ABTS cation and DPPH stable radicals; this relationship is evident when the model system, containing protein incubated with ribose or MGO, is considered. The different activities of the tested extracts could probably be ascribed to the different composition in chlorogenic acids (CQAs), being aqueous extract richer in 1-CQA, 3-CQA, and 1,3-di-CQA, and ethanolic extract in 5-CQA, caffeic acid, 1,5-di-CQA. These findings support further investigations to study the stability of the different CQAs in simil-physiological conditions and the feasibility of artichoke waste as antiglycative agents in food or pharmacological preparations.

CHEMICAL COMPOUNDS

5-caffeoylquinic acid (PubChem CID 5280633); 3-caffeoylquinic acid (PubChem CID 1794427); 1-caffeoylquinic acid (PubChem CID 10155076); 1,3-di-caffeoylquinic acid (PubChem CID 24720973); 1,5 - di-caffeoylquinic acid (PubChem CID 122685); caffeic acid (PubChem CID 689043); apigenin-7-glucuronide (PubChem CID 5319484); methylglyoxal PubChem CID (880); aminoguanidine hydrochloride (PubChem CID 2734687).

Natural Antioxidants in Foods and Medicinal Plants: Extraction, Assessment and Resources

Natural antioxidants are widely distributed in food and medicinal plants. These natural antioxidants, especially polyphenols and carotenoids, exhibit a wide range of biological effects, including anti-inflammatory, anti-aging, anti-atherosclerosis and anticancer. The effective extraction and proper assessment of antioxidants from food and medicinal plants are crucial to explore the potential antioxidant sources and promote the application in functional foods, pharmaceuticals and food additives. The present paper provides comprehensive information on the green extraction technologies of natural antioxidants, assessment of antioxidant activity at chemical and cellular based levels and their main resources from food and medicinal plants.

Kinetic modeling of the ultrasound-assisted extraction of polyphenols from Picea abies bark

In this paper, the kinetics of polyphenols extraction from spruce bark (Picea abies) under ultrasounds action was investigated. Studies were performed in order to express the effect of some specific parameters (as: ultrasounds, surface contact between solvent and solid, extraction time and temperature) on the total phenolic content (TPC). Experiments were performed in the presence and absence of ultrasounds, using different contact surfaces between solvent and solid, for times from 5 to 75min and temperatures of 318, 323 and 333K. All these factors have a positive influence on the process, enhancing the extraction rate by recovering higher amounts of polyphenols. The process takes place in two stages: a fast one in the first 20-30min (first stage), followed by a slow one approaching to an equilibrium concentration after 40min (second stage). In these conditions, the second-order kinetic model was successfully developed for describing the mechanism of ultrasound-assisted extraction of polyphenols from P. abies bark. Based on this model, values of second-order extraction rate constant (k), initial extraction rate (h), saturation concentration (Cs) and activation energy (Ea) could be predicted. Model validation was done by plotting experimental and predicted values of TPC's, revealing a very good correlation between the obtained data (R(2)>0.98).

Polyphenols from wolfberry and their bioactivities

Nine new phenylpropanoids, one new coumarin, and 43 known polyphenols were isolated from wolfberry. Their structures were determined by spectroscopic analyses, chemical methods, and comparison of NMR data. Polyphenols, an important type of natural products, are notable constituents in wolfberry. 53 polyphenols, including 28 phenylpropanoids, four coumarins, eight lignans, five flavonoids, three isoflavonoids, two chlorogenic acid derivatives, and three other constituents, were identified from wolfberry. Lignans and isoflavonoids were firstly reported from wolfberry. 22 known polyphenols were the first isolates from the genus Lycium. This research presents a systematic study on wolfberry polyphenols, including their bioactivities. All these compounds exhibited oxygen radical absorbance capacity (ORAC), and some compounds displayed DPPH radical scavenging activity. One compound had acetylcholinesterase inhibitory activity. The discovery of new polyphenols and their bioactivities is beneficial for understanding the scientific basis of the effects of wolfberry.