Dissolution and Separation of Wood Biopolymers Using Ionic Liquids

Lignocellulosic residues from bioethanol production: a novel source of biopolymers for laccase immobilization

The full utilization of the main components in the lignocellulosic biomass is the major goal from a biorefinery point of view, giving not only environmental benefits but also making the process economically viable. In this sense the solid residue obtained in bioethanol production after steam explosion pretreatment, enzymatic hydrolysis, and fermentation of the lignocellulosic biomass, was studied for further valorization. Two different residues were analyzed, one generated by the production of cellulosic ethanol from an energy crop such as switchgrass (Panicum virgatum) and the other, from wood (Eucalyptus globulus). The chemical composition of these by-products showed that they were mainly composed of lignin with a total content range from 70 to 83% (w/w) and small amounts of cellulose and hemicellulose. The present work was focused on devising a new alternative for processing these materials, based on the ability of the ionic liquids (IL) to dissolve lignocellulosic biomass. The resulting mixture of biopolymers and IL constituted the raw material for developing new insoluble biocatalysts. Active hydrogels based on fungal laccase from Dichostereum sordulentum 1488 were attained. A multifactorial analysis of the main variables involved in the immobilization process enabled a more direct approach to improving hydrogel-bound activity. These hydrogels achieved a 97% reduction in the concentration of the estrogen ethinylestradiol, an emerging contaminant of particular concern due to its endocrine activity. The novel biocatalysts based on fungal laccase entrapped on a matrix made from a by-product of second-generation bioethanol production presents great potential for performing heterogeneous catalysis offering extra value to the ethanol biorefinery.

Advances of Imidazolium Ionic Liquids for the Extraction of Phytochemicals from Plants

In this review, we present the research from 2013 to 2022 about the character of ionic liquids, the categories of phytochemicals, and the reasons for selecting imidazolium ionic liquids for phytochemical extraction. Then we introduce the structural formulae of the imidazolium ionic liquids commonly used in the extraction of phytochemicals, the methods used to prepare imidazolium ionic liquids, and a comprehensive introduction of how imidazolium ionic liquids are applied to extract phytochemicals from plants. Importantly, we discuss the strategies for studying the extraction mechanisms of imidazolium ionic liquids to extract phytochemicals, and the recovery methods regarding imidazolium ionic liquids and their recyclability are analyzed. Then the toxicity in imidazolium ionic liquids is pointed out. Finally, the challenges and prospects of extracting phytochemicals by imidazolium ionic liquids are summarized, and they are expected to provide some references for researchers.

A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency

Lignin is a promising alternative to traditional fossil resources for producing biofuels due to its aromaticity and renewability. Pyrolysis is an efficient technology to convert lignin to valuable chemicals, which is beneficial for improving lignin valorization. In this review, pyrolytic behaviors of various lignin were included, as well as the pyrolytic mechanism consisting of initial, primary, and charring stages were also introduced. Several parallel reactions, such as demethoxylation, demethylation, decarboxylation, and decarbonylation of lignin side chains to form light gases, major lignin structure decomposition to generate phenolic compounds, and polymerization of active lignin intermediates to yield char, can be observed through the whole pyrolysis process. Several parameters, such as pyrolytic temperature, time, lignin type, and functional groups (hydroxyl, methoxy), were also investigated to figure out their effects on lignin pyrolysis. On the other hand, zeolite-driven lignin catalytic pyrolysis and lignin co-pyrolysis with other hydrogen-rich co-feedings were also introduced for improving process efficiency to produce more aromatic hydrocarbons (AHs). During the pyrolysis process, phenolic compounds and/or AHs can be produced, showing promising applications in biochemical intermediates and biofuel additives. Finally, some challenges and future perspectives for lignin pyrolysis have been discussed.

Effective Extraction of Limonene and Hibaene from Hinoki (Chamaecyparis obtusa) Using Ionic Liquid and Deep Eutectic Solvent

The essential oils of hinoki (Chamaecyparis obtusa) leaves have anti-bacterial, anti-fungal, and relaxation properties that are likely associated with the major components such as sabinene, α-terpinyl acetate, limonene, elemol, myrcene, and hibaene. The present study describes the use of a cellulose-dissolving ionic liquid (IL) [C₂mim][(MeO)(H)PO₂] and low-toxicity solvents called betaine-based deep eutectic solvents (DESs) for the efficient extraction of hinoki essential oils. As a control method, organic solvent extraction was performed using either hexane, ethyl acetate (EtOAc), or acetone at 30 °C for 1 h. Both the experimental and control methods were conducted under the same conditions, which relied on partial dissolution of the leaves using the IL and DESs before partitioning the hinoki oils into the organic solvent for analysis. Quantitative analysis was performed using gas chromatography–mass spectrometry (GC-MS) in selected ion monitoring (SIM) mode. The results indicated that extraction using the [C₂mim][(MeO)(H)PO₂]/acetone bilayer system improved the yields of limonene and hibaene, 1.5- and 1.9-fold, respectively, when compared with the control method. In addition, extraction using betaine/l-lactic acid (molar ratio 1:1) gave the greatest yields for both limonene and hibaene, 1.3-fold and 1.5-fold greater, respectively, than when using an organic solvent. These results demonstrate the effective extraction of essential oils from plant leaves under conditions milder than those needed for the conventional method. The less toxic and environmentally begin DESs for the extraction are also applicable to the food and cosmetic industries.

The Pretreatment of Lignocelluloses With Green Solvent as Biorefinery Preprocess: A Minor Review

Converting agriculture and forestry lignocellulosic residues into high value-added liquid fuels (ethanol, butanol, etc.), chemicals (levulinic acid, furfural, etc.), and materials (aerogel, bioresin, etc.) via a bio-refinery process is an important way to utilize biomass energy resources. However, because of the dense and complex supermolecular structure of lignocelluloses, it is difficult for enzymes and chemical reagents to efficiently depolymerize lignocelluloses. Strikingly, the compact structure of lignocelluloses could be effectively decomposed with a proper pretreatment technology, followed by efficient separation of cellulose, hemicellulose and lignin, which improves the conversion and utilization efficiency of lignocelluloses. Based on a review of traditional pretreatment methods, this study focuses on the discussion of pretreatment process with recyclable and non-toxic/low-toxic green solvents, such as polar aprotic solvents, ionic liquids, and deep eutectic solvents, and provides an outlook of the industrial application prospects of solvent pretreatment.

Ionic liquids in the pretreatment of lignocellulosic biomass

The pretreatment is a key step in the processing of lignocellulosic biomass for its transformation into chemicals and materials of biorenewable origin. Ionic liquids, with their characteristic set of unique properties, have the potential to be the basis of novel pretreatment processes with higher effectiveness and improved sustainability as compared to the current state-of-the-art processes. In this opinion paper, the author provides a perspective on possible processing strategies for this pretreatment with ionic liquids, identifying different advantages as well as challenges to be overcome.

Ionic liquids and deep eutectic solvents for the recovery of phenolic compounds: effect of ionic liquids structure and process parameters

Water pollution is a severe and challenging issue threatening the sustainable development of human civilization. Besides other pollutants, waste fluid streams contain phenolic compounds. These have an adverse effect on the human health and marine ecosystem due to their toxic, mutagenic, and carcinogenic nature. Therefore, it is necessary to remove such phenolic pollutants from waste stream fluids prior to discharging to the environment. Different methods have been proposed to remove phenolic compounds from wastewater, including extraction using ionic liquids (ILs) and deep eutectic solvent (DES), a class of organic salts having melting point below 100 °C and tunable physicochemical properties. The purpose of this review is to present the progress in utilizing ILs and DES for phenolic compound extraction from waste fluid streams. The effects of IL structural characteristics, such as anion type, cation type, alkyl chain length, and functional groups will be discussed. In addition, the impact of key process parameters such as pH, phenol concentration, phase ratio, and temperature will be also described. More importantly, several ideas for addressing the limitations of the treatment process and improving its efficiency and industrial viability will be presented. These ideas may form the basis for future studies on developing more effective IL-based processes for treating wastewaters contaminated with phenolic pollutants, to address a growing worldwide environmental problem.

Ionic Liquid-Assisted Extraction of Essential Oils from Thujopsis dolobrata (Hiba)

Aomori hiba (Thujopsis dolobrata) has been used as a building material for centuries because of the wood's resistance against fungi and termites. In addition, the essential oil of hiba wood has a relaxing woody fragrance and antifungal properties and is composed mainly of (-)-thujopsene, cedrol, and hinokitiol. Steam distillation is the main industrial method for obtaining the oil but requires large amounts of water and heating energy. The present study describes the use of a cellulose-dissolving [C₂mim][(MeO)(H)PO₂] ionic liquid (IL) for efficient extraction of hiba oil. As a control method, organic solvent extraction using either hexane, Et₂O, or EtOAc was conducted at 80 °C for 1 h. The method developed in this study using an IL was conducted at the same temperature and time as the control method and relied on partial dissolution of the wood using the IL before partitioning the hiba oil into the organic solvent for analysis. Quantitative analysis was performed using gas chromatography-mass spectrometry in selected ion-monitoring mode. The results showed that extraction using the [C₂mim][(MeO)(H)PO₂] IL/hexane biphasic system improved the yields of (-)-thujopsene, cedrol 1.2- and 2.3-fold, when compared with the control method. Furthermore, extraction at a lower temperature (30 °C) did not significantly change the yield. The IL could be recovered with high purity, while the cellulose-rich material and lignin were regenerated. This study demonstrates the ability to effectively extract wood essential oil more quickly and under milder conditions than the conventional method, with subsequent separation and regeneration of wood biopolymers using an IL.

A Review on the Partial and Complete Dissolution and Fractionation of Wood and Lignocelluloses Using Imidazolium Ionic Liquids

Ionic liquids have shown great potential in the last two decades as solvents, catalysts, reaction media, additives, lubricants, and in many applications such as electrochemical systems, hydrometallurgy, chromatography, CO2 capture, etc. As solvents, the unlimited combinations of cations and anions have given ionic liquids a remarkably wide range of solvation power covering a variety of organic and inorganic materials. Ionic liquids are also considered "green" solvents due to their negligible vapor pressure, which means no emission of volatile organic compounds. Due to these interesting properties, ionic liquids have been explored as promising solvents for the dissolution and fractionation of wood and cellulose for biofuel production, pulping, extraction of nanocellulose, and for processing all-wood and all-cellulose composites. This review describes, at first, the potential of ionic liquids and the impact of the cation/anion combination on their physiochemical properties and on their solvation power and selectivity to wood polymers. It also elaborates on how the dissolution conditions influence these parameters. It then discusses the different approaches, which are followed for the homogeneous and heterogeneous dissolution and fractionation of wood and cellulose using ionic liquids and categorize them based on the target application. It finally highlights the challenges of using ionic liquids for wood and cellulose dissolution and processing, including side reactions, viscosity, recyclability, and price.

Is it possible to control kinetic rates of radical polymerisation in ionic liquids?

Experimental studies have noted the often surprising and unpredictable effect of ionic liquids as solvents on reaction kinetics for radical polymerisation. We theoretically investigate the energetic and structural effects of ionic liquids, both protic and aprotic, on radical stability, presenting stabilisation of the radical by the ionic liquid by up to -78.0 kJ mol-1. Kinetic data relating to propagating systems for several industrially viable monomers indicate that propagation rates can be increased or decreased (by up to 6 orders of magnitude) depending on the monomer and ionic liquid combination. The interplay of activation entropy and activation enthalpy, much of which depends on hydrogen bonding between the solvent and reactants, play a crucial role in controlling reaction kinetics. It is concluded that the use of cheaper protic ionic liquids as solvents may be viable for improved kinetic control over radical reactions.