Cyclodextrin Aldehydes are Oxidase Mimics

One-step synthesis of Ling's tetrol and its conversion into A,D-di-allo-α-cyclodextrin derivatives

2A-F,3B,C,E,F,6B,C,E,F-Tetradeca-O-benzyl-α-cyclodextrin or Ling's tetrol is a unique α-cyclodextrin derivative that is partially protected with specific access points on both rims of the cyclodextrin structure. Ling's tetrol is therefore potentially useful for the synthesis of more complex and sophisticated enzyme models and supramolecular structures. However, the original synthesis gave only 10% yield after a reaction time of 4 days, and a recent improvement that gave 52% yield required two steps and a reaction time in one step of 6 days. Here, a single-step synthesis is reported where Ling's tetrol is obtained in a yield of 59% with a reaction time of 40 hours. 2A-F,3B,C,E,F,6B,C,E,F-Tetradeca-O-benzyl-α-cyclodextrin was subsequently converted into 6A,D-dicarboxy-3A,D-diepi-α-cyclodextrin, 3A,D-dioxo-α-cyclodextrin and 3A,D-diamino-3A,D-dideoxy-3A,D-diepi-α-cyclodextrin. The binding of these compounds to CH4 and CO2 was determined.

Formation of Aggregate-Free Gold Nanoparticles in the Cyclodextrin-Tetrachloroaurate System Follows Finke-Watzky Kinetics

Cyclodextrin-capped gold nanoparticles are promising drug-delivery vehicles, but the technique of their preparation without trace amounts of aggregates is still lacking, and the size-manipulation possibility is very limited. In the present study, gold nanoparticles were synthesized by means of 0.1% (w/w) tetrachloroauric acid reduction with cyclodextrins at room temperature, at cyclodextrin concentrations of 0.001 M, 0.002 M and 0.004 M, and pH values of 11, 11.5 and 12. The synthesized nanoparticles were characterized by dynamic light scattering in both back-scattering and forward-scattering modes, spectrophotometry, X-ray photoelectron spectroscopy, transmission electron microscopy and Fourier-transform infrared spectroscopy. These techniques revealed 14.9% Au¹⁺ on their surfaces. The Finke–Watzky kinetics of the reaction was demonstrated, but the actual growth mechanism turned out to be multistage. The synthesis kinetics and the resulting particle-size distribution were pH-dependent. The reaction and centrifugation conditions for the recovery of aggregate-free nanoparticles with different size distributions were determined. The absorbances of the best preparations were 7.6 for α-cyclodextrin, 8.9 for β-cyclodextrin and 7.5 for γ-cyclodextrin. Particle-size distribution by intensity was indicative of the complete absence of aggregates. The resulting preparations were ready to use without the need for concentration, filtration, or further purification. The synthesis meets the requirements of green chemistry.

Mono-6-Substituted Cyclodextrins-Synthesis and Applications

Cyclodextrins are well known supramolecular hosts used in a wide range of applications. Monosubstitution of native cyclodextrins in the position C-6 of a glucose unit represents the simplest method how to achieve covalent binding of a well-defined host unit into the more complicated systems. These derivatives are relatively easy to prepare; that is why the number of publications describing their preparations exceeds 1400, and the reported synthetic methods are often very similar. Nevertheless, it might be very demanding to decide which of the published methods is the best one for the intended purpose. In the review, we aim to present only the most useful and well-described methods for preparing different types of mono-6-substituted derivatives. We also discuss the common problems encountered during their syntheses and suggest their optimal solutions.

Programmed Synthesis of Hepta-Differentiated β-Cyclodextrin: 1 out of 117655 Arrangements

Cyclodextrin poly-functionalization has fueled progress in their use in multiple applications such as enzyme mimicry, but also in the polymer sciences, luminescence, as sensors or for biomedical applications. However, regioselective access to a given pattern of functions on β-cyclodextrin is still very limited. We uncover a new orienting group, the thioacetate, that expands the toolbox available for cyclodextrin poly-hetero-functionalization using diisobutylaluminum hydride (DIBAL-H) promoted debenzylation. The usefulness of this group is illustrated in the first synthesis of a precisely hepta-hetero-functionalized β-cyclodextrin. By way of comparison, a random hepta-functionalization would give 117655 different molecules. This synthesis is not simply the vain quest for the Holy Grail of CD hetero-functionalization, but it illustrates the versatility of the DIBAL-H oriented hetero-functionalization strategy, opening the way to a multitude of useful functionalization patterns for new practical applications.

Synthesis of β-cyclodextrin-lysozyme conjugates and their physicochemical and biochemical properties

Recently a great interest in the field of protein engineering and the design of innovative drug delivery systems employing specific ligands such as cyclodextrins is observed. The paper reports the solid state, thermal method for protein coupling with β-cyclodextrin and the physicochemical and biological properties of the obtained conjugates. The structure of the obtained conjugates was investigated via liquid chromatography-mass spectrometry, dynamic light scattering and circular dichroism analysis. The presented conjugates were biologically active and covalently bound β-cyclodextrin preserved the ability to form inclusion complexes with the model compound. This report demonstrates the great potential of cyclodextrin as a modifying unit that can be used to modulate the properties of therapeutic proteins, additionally giving such conjugates the possibility to transport many therapeutic substances in the form of inclusion complexes. In addition, the paper presents the potential of protein-cyclodextrin conjugates to construct innovative bioactive molecules for biological and medical applications.

Selective perrhenate recognition in pure water by halogen bonding and hydrogen bonding alpha-cyclodextrin based receptors

Alpha-cyclodextrin based anion receptors containing halogen and hydrogen bond donor motifs display selective association of perrhenate in neutral aqueous media.

Radical-Mediated C-H Functionalization: A Strategy for Access to Modified Cyclodextrins

A simple and efficient radical C-H functionalization to access modified cyclodextrins (CDs) has been developed. The well-defined conformation of glycosidic and aglyconic bonds in α-, β-, and γ-CDs favors the intramolecular 1,8-hydrogen atom transfer (HAT) promoted by the 6^I-O-yl radical, which abstracts regioselectively the hydrogen at C5^II of the contiguous pyranose. The C5^II-radical evolves by a polar crossover mechanism to a stable 1,3,5-trioxocane ring between two adjacent glucoses or alternatively triggers the inversion of one α-d-glucose into a 5-C-acetoxy-β-l-idose unit possessing a ¹C₄ conformation. The 6^I,IV- and 6^I,III-diols of α- and β-CDs behave similarly to the monoalcohols, forming mostly compounds originating from two 1,8-HAT consecutive processes. In the case of 6^I,II-diols the proximity of the two 6-O-yl radicals in adjacent sugar units allows the formation of unique lactone rings within the CD framework via a 1,8-HAT-β-scission tandem mechanism. X-ray diffraction carried out on the crystalline 1,4-bis(trioxocane)-α-CD derivative shows a severe distortion toward a narrower elliptical shape for the primary face.

Photocatalysis of Volatile Organic Compounds in water: Towards a deeper understanding of the role of cyclodextrins in the photodegradation of toluene over titanium dioxide

HYPOTHESIS

Cyclodextrin-assisted photodegradation of toluene was investigated in water in the presence of a photo-irradiated commercial titanium dioxide photocatalyst. It was expected that cyclodextrins could form water-soluble supramolecular host/guest complexes with the toluene and thus promote the approach of the pollutant on the TiO2 surface and enhance the phototocatalytic oxidation efficiency.

EXPERIMENTS

Photodegradation kinetics of toluene were investigated under UV-C and near-visible light radiation in aqueous suspensions of TiO2. Impact of cyclodextrin (CD) on the photocatalytic efficiency of TiO2 was evaluated with different cyclodextrins: α-CD, β-CD, γ-CD and RAME-β-CD. Host-guest association constants were determined by static headspace gas chromatography and affinity of cyclodextrins for the TiO2 surface by isothermal adsorption studies. Issue of the cyclodextrin stability during the degradation process was examined using Total Organic Carbon, NMR and MALDI-TOF analyses.

FINDINGS

Toluene could be fully mineralized by TiO2 in water within hours, even if the presence of cyclodextrin caused a delay in the photodegradation process. The chemical nature of cyclodextrins was found to exert a significant influence on the extent of inhibitory effect, which was discussed in terms of balance between solubilization efficiency, substrate protection and coverage of active sites of TiO2 by competitive adsorption. The cyclodextrin degradation was also studied and discussed.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: an update for 2009-2010

This review is the sixth update of the original article published in 1999 on the application of MALDI mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2010. General aspects such as theory of the MALDI process, matrices, derivatization, MALDI imaging, arrays and fragmentation are covered in the first part of the review and applications to various structural typed constitutes the remainder. The main groups of compound that are discussed in this section are oligo and polysaccharides, glycoproteins, glycolipids, glycosides and biopharmaceuticals. Many of these applications are presented in tabular form. Also discussed are medical and industrial applications of the technique, studies of enzyme reactions and applications to chemical synthesis.

Supramolecular catalysis. Part 2: artificial enzyme mimics

The design of artificial catalysts able to compete with the catalytic proficiency of enzymes is an intense subject of research. Non-covalent interactions are thought to be involved in several properties of enzymatic catalysis, notably (i) the confinement of the substrates and the active site within a catalytic pocket, (ii) the creation of a hydrophobic pocket in water, (iii) self-replication properties and (iv) allosteric properties. The origins of the enhanced rates and high catalytic selectivities associated with these properties are still a matter of debate. Stabilisation of the transition state and favourable conformations of the active site and the product(s) are probably part of the answer. We present here artificial catalysts and biomacromolecule hybrid catalysts which constitute good models towards the development of truly competitive artificial enzymes.