Creating Oxidase-Peroxidase Fusion Enzymes as a Toolbox for Cascade Reactions

User-friendly one-step disposable signal-on bioassay for glyphosate detection in water samples

The onsite detection of glyphosate requires an easy-to-handle, low-cost and disposable assay for untrained users as requested by the ASSURED guidelines. A new strategy based on the expression of fusion proteins is proposed here. A glyphosate oxidase derived from Bacillus subtilis and the 6E10 variant of the dye peroxidase from Pseudomonas putida, both fused with the carbohydrate binding module (CBM) 3a from Clostridium thermocellum, were designed and expressed, leading to GlyphOx-CBM and 6E10-CBM. Cell lysates were used to immobilise both enzymes on cotton buds' heads without any purification. The cotton buds exhibit glyphosate oxidase activity when dipped into a glyphosate-contaminated water sample containing the 6E10-CBM chromogenic substrates. The chromophore could be quantified both in the solution and on the cotton buds' heads. Photography followed by image analysis allows to detect glyphosate with a linear range of 0.25-2.5 mM and a limit of detection (LoD) of 0.12 mM. When the chromogenic substrates are replaced by luminol, the chemiluminescence reaction allows the detection of glyphosate with a linear range of 2-500 μM and a LoD of 0.45 μM. No interference was observed using glyphosate analogues (glycine, sarcosine, aminomethylphosphonic acid) or other herbicides used in a mixture. Only cysteine was found to inhibit 6E10-CBM. Two river waters spiked with glyphosate lead to recoveries of 64-131%. This work describes a very easy-to-handle and inexpensive signal-on bioassay for glyphosate detection in real surface water samples.

A wide array of lignin-related phenolics are oxidized by an evolved bacterial dye-decolourising peroxidase

Lignin is the second most abundant natural polymer next to cellulose and by far the largest renewable source of aromatic compounds on the planet. Dye-decolourising peroxidases (DyPs) are biocatalysts with immense potential in lignocellulose biorefineries to valorize emerging lignin building blocks for environmentally friendly chemicals and materials. This work investigates the catalytic potential of the engineered PpDyP variant 6E10 for the oxidation of 24 syringyl, guaiacyl and hydroxybenzene lignin-phenolic derivatives. Variant 6E10 exhibited up to 100-fold higher oxidation rates at pH 8 for all the tested phenolic substrates compared to the wild-type enzyme and other acidic DyPs described in the literature. The main products of reactions were dimeric isomers with molecular weights of (2 × MWsubstrate - 2 H). Their structure depends on the substitution pattern of the aromatic ring of substrates, i.e., of the coupling possibilities of the primarily formed radicals upon enzymatic oxidation. Among the dimers identified were syringaresinol, divanillin and diapocynin, important sources of structural scaffolds exploitable in medicinal chemistry, food additives and polymers.

Biocatalysis for biorefineries: The case of dye-decolorizing peroxidases

Dye-decolorizing Peroxidases (DyPs) are heme-containing enzymes in fungi and bacteria that catalyze the reduction of hydrogen peroxide to water with concomitant oxidation of various substrates, including anthraquinone dyes, lignin-related phenolic and non-phenolic compounds, and metal ions. Investigation of DyPs has shed new light on peroxidases, one of the most extensively studied families of oxidoreductases; still, details of their microbial physiological role and catalytic mechanisms remain to be fully disclosed. They display a distinctive ferredoxin-like fold encompassing anti-parallel β-sheets and α-helices, and long conserved loops surround the heme pocket with a role in catalysis and stability. A tunnel routes H₂O₂ to the heme pocket, whereas binding sites for the reducing substrates are in cavities near the heme or close to distal aromatic residues at the surface. Variations in reactions, the role of catalytic residues, and mechanisms were observed among different classes of DyP. They were hypothetically related to the presence or absence of distal H₂O molecules in the heme pocket. The engineering of DyPs for improved properties directed their biotechnological applications, primarily centered on treating textile effluents and degradation of other hazardous pollutants, to fields such as biosensors and valorization of lignin, the most abundant renewable aromatic polymer. In this review, we track recent research contributions that furthered our understanding of the activity, stability, and structural properties of DyPs and their biotechnological applications. Overall, the study of DyP-type peroxidases has significant implications for environmental sustainability and the development of new bio-based products and materials with improved end-of-life options via biodegradation and chemical recyclability, fostering the transition to a sustainable bio-based industry in the circular economy realm.

Design and biocatalytic applications of genetically fused multifunctional enzymes

Fusion proteins, understood as those created by joining two or more genes that originally encoded independent proteins, have numerous applications in biotechnology, from analytical methods to metabolic engineering. The use of fusion enzymes in biocatalysis may be even more interesting due to the physical connection of enzymes catalyzing successive reactions into covalently linked complexes. The proximity of the active sites of two enzymes in multi-enzyme complexes can make a significant contribution to the catalytic efficiency of the reaction. However, the physical proximity of the active sites does not guarantee this result. Other aspects, such as the nature and length of the linker used for the fusion or the order in which the enzymes are fused, must be considered and optimized to achieve the expected increase in catalytic efficiency. In this review, we will relate the new advances in the design, creation, and use of fused enzymes with those achieved in biocatalysis over the past 20 years. Thus, we will discuss some examples of genetically fused enzymes and their application in carbon‑carbon bond formation and oxidative reactions, generation of chiral amines, synthesis of carbohydrates, biodegradation of plant biomass and plastics, and in the preparation of other high-value products.

β-Cyclodextrin-Stabilized Biosynthesis Nanozyme for Dual Enzyme Mimicking and Fenton Reaction with a High Potential Anticancer Agent

The myth of inactivity of inorganic materials in a biological system breaks down by the discovery of nanozymes. From this time, the nanozyme has attracted huge attention for its high durability, cost-effective production, and easy storage over the natural enzyme. Moreover, the multienzyme-mimicking activity of nanozymes can regulate the level of reactive oxygen species (ROS) in an intercellular system. ROS can be generated by peroxidase (POD), oxidase (OD), and Fenton-like catalytic reaction by a nanozyme which kills the cancer cells by oxidative stress; therefore, it is important in CDT (chemo dynamic therapy). Our current study designed to investigate the enzyme mimicking behavior and anticancer ability of cerium-based nanomaterials because the cerium-based materials offer a high redox ability while maintaining nontoxicity and high stability. Our group synthesized CeZrO₄ nanoparticles by a green method using β-cyclodextrin as a stabilizer and neem leaf extract as a reducing agent, exhibiting POD- and OD-like dual enzyme activities. The best enzyme catalytic activity is shown in pH = 4, indicating the high ROS generation in an acidic medium (tumor microenvironment) which is also supported by the Fenton-like behavior of CeZrO₄ nanoparticles. Inspired by the high ROS generation in vitro method, we investigated the disruption of human kidney cells by this nanoparticle, successfully verified by the MTT assay. The harmful effect of ROS in a normal cell is also investigated by the in vitro MTT assay. The results suggested that the appreciable anticancer activity with minimal side effects by this synthesized nanomaterial.

Characterization of Two Hydrogen Peroxide Resistant Peroxidases from Rhodococcus opacus 1CP

The dye-decolorizing peroxidases (DyP) are a family of heme-dependent enzymes present on a broad spectrum of microorganisms. While the natural function of these enzymes is not fully understood, their capacity to degrade highly contaminant pigments such as azo dyes or anthraquinones make them excellent candidates for applications in bioremediation and organic synthesis. In this work, two novel DyP peroxidases from the organism Rhodococcus opacus 1CP (DypA and DypB) were cloned and expressed in Escherichia coli. The enzymes were purified and biochemically characterized. The activities of the two DyPs via 2,2′-azino-bis [3-ethylbenzthiazoline-6-sulphonic acid] (ABTS) assay and against Reactive Blue 5 were assessed and optimized. Results showed varying trends for DypA and DypB. Remarkably, these enzymes presented a particularly high tolerance towards H2O2, retaining its activities at about 10 mM H2O2 for DypA and about 4.9 mM H2O2 for DypB.

The vast repertoire of carbohydrate oxidases: An overview

Carbohydrates are widely abundant molecules present in a variety of forms. For their biosynthesis and modification, nature has evolved a plethora of carbohydrate-acting enzymes. Many of these enzymes are of particular interest for biotechnological applications, where they can be used as biocatalysts or biosensors. Among the enzymes catalysing conversions of carbohydrates are the carbohydrate oxidases. These oxidative enzymes belong to different structural families and use different cofactors to perform the oxidation reaction of CH-OH bonds in carbohydrates. The variety of carbohydrate oxidases available in nature reflects their specificity towards different sugars and selectivity of the oxidation site. Thanks to their properties, carbohydrate oxidases have received a lot of attention in basic and applied research, such that nowadays their role in biotechnological processes is of paramount importance. In this review we provide an overview of the available knowledge concerning the known carbohydrate oxidases. The oxidases are first classified according to their structural features. After a description on their mechanism of action, substrate acceptance and characterisation, we report on the engineering of the different carbohydrate oxidases to enhance their employment in biocatalysis and biotechnology. In the last part of the review we highlight some practical applications for which such enzymes have been exploited.

Structure and function relationships of sugar oxidases and their potential use in biocatalysis

Several sugar oxidases that catalyze the oxidation of sugars have been isolated and characterized. These enzymes can be classified as flavoenzyme due to the presence of flavin adenine dinucleotide (FAD) as a cofactor. Sugar oxidases have been proposed to be the key biocatalyst in biotransformation of carbohydrates which can potentially convert sugars to provide a pool of intermediates for synthesis of rare sugars, fine chemicals and drugs. Moreover, sugar oxidases have been applied in biosensing of various biomolecules in food industries, diagnosis of diseases and environmental pollutant detection. This review provides the discussions on general properties, current mechanistic understanding, structural determination, biocatalytic application, and biosensor integration of representative sugar oxidase enzymes, namely pyranose 2-oxidase (P2O), glucose oxidase (GO), hexose oxidase (HO), and oligosaccharide oxidase. The information regarding the relationship between structure and function of these sugar oxidases points out the key properties of this particular group of enzymes that can be modified by engineering, which had resulted in a remarkable economic importance.

Convergent Cascade Catalyzed by Monooxygenase-Alcohol Dehydrogenase Fusion Applied in Organic Media

With the aim of applying redox-neutral cascade reactions in organic media, fusions of a type II flavin-containing monooxygenase (FMO-E) and horse liver alcohol dehydrogenase (HLADH) were designed. The enzyme orientation and expression vector were found to influence the overall fusion enzyme activity. The resulting bifunctional enzyme retained the catalytic properties of both individual enzymes. The lyophilized cell-free extract containing the bifunctional enzyme was applied for the convergent cascade reaction consisting of cyclobutanone and butane-1,4-diol in different microaqueous media with only 5 % (v/v) aqueous buffer without any addition of external cofactor. Methyl tert-butyl ether and cyclopentyl methyl ether were found to be the best organic media for the synthesis of γ-butyrolactone, resulting in about 27 % analytical yield.

Expression and Characterization of a Dye-Decolorizing Peroxidase from Pseudomonas Fluorescens Pf0-1

The consumption of dyes is increasing worldwide in line with the increase of population and demand for clothes and other colored products. However, the efficiency of dyeing processes is still poor and results in large amounts of colored effluents. It is desired to develop a portfolio of enzymes which can be used for the treatment of colored wastewaters. Herein, we used genome sequence information to discover a dye-decolorizing peroxidase (DyP) from Pseudomonas fluorescens Pf-01. Two genes putatively encoding for DyPs were identified in the respective genome and cloned for expression in Escherichia coli, of which one (PfDyP B2) could be overexpressed as a soluble protein. PfDyP B2 shows some typical features known for DyPs which includes the ability to convert dyes at the expense of hydrogen peroxide. Interestingly, t-butyl hydroperoxide could be used as an alternative substrate to hydrogen peroxide. Immobilization of PfDyP B2 in calcium-alginate beads resulted in a significant increase in stability: PfDyP B2 retains 80% of its initial activity after 2 h incubation at 50 °C, while the soluble enzyme is inactivated within minutes. PfDyP B2 was also tested with aniline and ethyl diazoacetate as substrates. Based on GC-MS analyses, 30% conversion of the starting material was achieved after 65 h at 30 °C. Importantly, this is the first report of a DyP-catalyzed insertion of a carbene into an N-H bond.

Exploiting Designed Oxidase-Peroxygenase Mutual Benefit System for Asymmetric Cascade Reactions

A unique P450 monooxygenase–peroxygenase mutual benefit system was designed as the core element in the construction of a biocatalytic cascade reaction sequence leading from 3-phenyl propionic acid to (R)-phenyl glycol. In this system, P450 monooxygenase (P450-BM3) and P450 peroxygenase (OleT_JE) not only function as catalysts for the crucial initial reactions, they also ensure an internal in situ H₂O₂ recycle mechanism that avoids its accumulation and thus prevents possible toxic effects. By directed evolution of P450-BM3 as the catalyst in the enantioselective epoxidation of the styrene-intermediate, formed from 3-phenyl propionic acid, and the epoxide hydrolase ANEH for final hydrolytic ring opening, (R)-phenyl glycol and 9 derivatives thereof were synthesized from the respective carboxylic acids in one-pot processes with high enantioselectivity.

Extending Designed Linear Biocatalytic Cascades for Organic Synthesis

Artificial cascade reactions involving biocatalysts have demonstrated a tremendous potential during the recent years. This review just focuses on selected examples of the last year and putting them into context to a previously published suggestion for classification. Subdividing the cascades according to the number of catalysts in the linear sequence, and classifying whether the steps are performed simultaneous or in a sequential fashion as well as whether the reaction sequence is performed in vitro or in vivo allows to organise the concepts. The last year showed, that combinations of in vivo as well as in vitro are possible. Incompatible reaction steps may be run in a sequential fashion or by compartmentalisation of the incompatible steps either by using special reactors (membrane), polymersomes or flow techniques.

Enzyme Fusions in Biocatalysis: Coupling Reactions by Pairing Enzymes

One approach to bringing enzymes together for multienzyme biocatalysis is genetic fusion. This enables the production of multifunctional enzymes that can be used for whole-cell biotransformations or for in vitro (cascade) reactions. In some cases and in some aspects, such as expression and conversions, the fused enzymes outperform a combination of the individual enzymes. In contrast, some enzyme fusions are greatly compromised in activity and/or expression. In this Minireview, we give an overview of studies on fusions between two or more enzymes that were used for biocatalytic applications, with a focus on oxidative enzymes. Typically, the enzymes are paired to facilitate cofactor recycling or cosubstrate supply. In addition, different linker designs are briefly discussed. Although enzyme fusion is a promising tool for some biocatalytic applications, future studies could benefit from integrating the findings of previous studies in order to improve reliability and effectiveness.

Design of Artificial Alcohol Oxidases: Alcohol Dehydrogenase-NADPH Oxidase Fusions for Continuous Oxidations

To expand the arsenal of industrially applicable oxidative enzymes, fusions of alcohol dehydrogenases with an NADPH-oxidase were designed. Three different alcohol dehydrogenases (LbADH, TbADH, ADHA) were expressed with a thermostable NADPH-oxidase fusion partner (PAMO C65D) and purified. The resulting bifunctional biocatalysts retained the catalytic properties of the individual enzymes, and acted essentially like alcohol oxidases: transforming alcohols to ketones by using dioxygen as mild oxidant, while merely requiring a catalytic amount of NADP⁺ . In small-scale reactions, the purified fusion enzymes show good performances, with 69-99 % conversion, 99 % ee with a racemic substrate, and high cofactor and enzyme total turnover numbers. As the fusion enzymes essentially act as oxidases, we found that commonly used high-throughput oxidase-activity screening methods can be used. Therefore, if needed, the fusion enzymes could be easily engineered to tune their properties.

Experimental Protocols for Generating Focused Mutant Libraries and Screening for Thermostable Proteins

Many proteins are rapidly deactivated when exposed to high or even ambient temperatures. This cannot only impede the study of a particular protein, but also is one of the major reasons why enzyme catalysis is still widely unable to compete with established chemical processes. Furthermore, differences in protein stability are a challenge in synthetic biology, when individual modules prove to be incompatible. The targeted stabilization of proteins can overcome these hurdles, and protein engineering techniques are more and more reliably supported by computational chemistry tools. Accordingly, algorithms to predict the differences in folding energy of a mutant compared to the wild-type, ΔΔG^fold, are used in the highly successful FRESCO workflow. The resulting single mutant prediction library consists typically of a few hundred amino acid exchanges, and after combining the most successful hits we so far obtained stabilized mutants which exhibited increases in apparent melting temperature of 20-35°C and showed vastly increased half-lives, as well as resistance to cosolvents. Here, we report a detailed protocol to generate these mutant libraries experimentally, covering the entire workflow from primer design, through mutagenesis, protein production and screening, to mutation combination strategies. The individual parts of the method are furthermore applicable to many other scenarios besides protein stabilization, and these protocols are valuable for any project requiring individual or semi high-throughput site-directed mutagenesis, protein expression and purification, or generation of mutant combination libraries.

The Biocatalytic Synthesis of Syringaresinol from 2,6-Dimethoxy-4-allylphenol in One-Pot Using a Tailored Oxidase/Peroxidase System

Syringaresinol was synthesized in a one-pot conversion containing eugenol oxidase (EUGO) and horseradish peroxidase (HRP) using the relatively cheap 2,6-dimethoxy-4-allylphenol as a substrate. This conversion is fully coupled as the hydrogen peroxide generated from the reaction of EUGO with the substrate is utilized by the HRP to convert the formed sinapyl alcohol into syringaresinol. To improve the performance of EUGO on 2,6-dimethoxy-4-allylphenol, structure-inspired enzyme engineering was performed. This yielded the I427A EUGO mutant that is significantly more efficient with 2,6-dimethoxy-4-allylphenol. The I427A EUGO mutant together with HRP were capable of efficiently producing syringaresinol as a major product. After optimization and upscaling the conversion to a semipreparative scale (1 gr), syringaresinol was obtained in 81% yield.

Creating Oxidase-Peroxidase Fusion Enzymes as a Toolbox for Cascade Reactions

A set of bifunctional oxidase-peroxidases has been prepared by fusing four distinct oxidases to a peroxidase. Although such fusion enzymes have not been observed in nature, they could be expressed and purified in good yields. Characterization revealed that the artificial enzymes retained the capability to bind the two required cofactors and were catalytically active as oxidase and peroxidase. Peroxidase fusions of alditol oxidase and chitooligosaccharide oxidase could be used for the selective detection of xylitol and cellobiose with a detection limit in the low-micromolar range. The peroxidase fusions of eugenol oxidase and 5-hydroxymethylfurfural oxidase could be used for dioxygen-driven, one-pot, two-step cascade reactions to convert vanillyl alcohol into divanillin and eugenol into lignin oligomers. The designed oxidase-peroxidase fusions represent attractive biocatalysts that allow efficient biocatalytic cascade oxidations that only require molecular oxygen as an oxidant.