Study of biodegradable occluder of atrial septal defect in a porcine model

Progress of biodegradable polymer application in cardiac occluders

Cardiac septal defect is the most prevalent congenital heart disease and is typically treated with open-heart surgery under cardiopulmonary bypass. Since the 1990s, with the advancement of interventional techniques and minimally invasive transthoracic closure techniques, cardiac occluder implantation represented by the Amplazter products has been the preferred treatment option. Currently, most occlusion devices used in clinical settings are primarily composed of Nitinol as the skeleton. Nevertheless, long-term follow-up studies have revealed various complications related to metal skeletons, including hemolysis, thrombus, metal allergy, cardiac erosion, and even severe atrioventricular block. Thus, occlusion devices made of biodegradable materials have become the focus of research. Over the past two decades, several bioabsorbable cardiac occluders for ventricular septal defect and atrial septal defect have been designed and trialed on animals or humans. This review summarizes the research progress of bioabsorbable cardiac occluders, the advantages and disadvantages of different biodegradable polymers used to fabricate occluders, and discusses future research directions concerning the structures and materials of bioabsorbable cardiac occluders.

Assessment of degradability and endothelialization of modified poly L-lactic acid (PLLA) atrial septal defect (ASD) occluders over time in vivo

OBJECTIVE

To evaluate the fiber-degradation and endothelialization of a modified poly L-lactic acid (PLLA) atrial septal defect (ASD) occluder for a long time in vivo.

METHODS

A total of 57 New Zealand rabbits were selected to establish the vasculature implantation model, which would be used to characterize the mechanical properties and pathological reaction of PLLA filaments (a raw polymer of ASD occluder). In total, 27 Experimental piglets were used to create the ASD model for the catheter implantation of PLLA ASD occluders. Then, X-ray imaging, transthoracic echocardiography, histopathology, and scanning electron microscope (SEM) were performed in the experimental animals at 3, 6, 12, and 24 months after implantation.

RESULTS

In the rabbit models, the fibrocystic grade was 0 and the inflammatory response was grade 2 at 6 months after vasculature implantation of the PLLA filaments. The mass loss of PLLA filaments increased appreciably with the increasing duration of implantation, but their mechanical strength was decreased without broken. In the porcine models, the cardiac gross anatomy showed that all PLLA ASD occluders were stable in the interatrial septum without any vegetation or thrombus formation. At 24 months, the occluders had been embedded into endogenous host tissue nearly. Pathological observations suggested that the occluders degraded gradually without complications at different periods. SEM showed that the occluders were endothelialized completely and essentially became an integral part of the body over time.

CONCLUSION

In the animal model, the modified PLLA ASD occluders exhibited good degradability and endothelialization in this long-term follow-up study.

Development of Innovative Biomaterials and Devices for the Treatment of Cardiovascular Diseases

Cardiovascular diseases have become the leading cause of death worldwide. The increasing burden of cardiovascular diseases has become a major public health problem and how to carry out efficient and reliable treatment of cardiovascular diseases has become an urgent global problem to be solved. Recently, implantable biomaterials and devices, especially minimally invasive interventional ones, such as vascular stents, artificial heart valves, bioprosthetic cardiac occluders, artificial graft cardiac patches, atrial shunts, and injectable hydrogels against heart failure, have become the most effective means in the treatment of cardiovascular diseases. Herein, an overview of the challenges and research frontier of innovative biomaterials and devices for the treatment of cardiovascular diseases is provided, and their future development directions are discussed.

Preparation and in vitro biocompatibility of PBAT and chitosan composites for novel biodegradable cardiac occluders

The biodegradable composites were prepared by melt blending of chitosan (CS) and poly(butyleneadipate-co-terephthalate) (PBAT). By utilizing Fourier transformed infrared spectroscopy, scanning electron microscopy-energy dispersive spectroscopy, mechanical properties analysis, water contact angle measuring, differential scanning calorimetry, and thermogravimetric analysis, it was demonstrated that the CS of the PBAT-CS10 composite was relatively evenly dispersed in the PBAT matrix, the mechanical properties were significantly improved, the hydrophilicity was increased, the cold crystallization temperature was increased, and a good range of melt working temperature was obtained. The PBAT-CS10 composite was used to fabricate a cardiac occluder by fused deposition modeling of three-dimensional printing, and finite element analysis, and in vitro implantation testing proved the occluder’s mechanical support and sealing function under extreme boundary conditions. In vitro degradation experiments, neutral red uptake cytotoxicity assay, CCK-8 cell proliferation detection, immunofluorescence staining of the cytoskeleton, cell apoptosis detection, and reactive oxygen species assay were all performed on the composite, confirming that it and the occluder made of it could be hydrolyzed under physiological conditions and had no adverse effects on the cell membrane, lysosome membrane, cell proliferation, cell morphology, cell apoptosis, or ROS level, and had good biocompatibility.

Initial Clinical Experience with the Biodegradable AbsnowTM Device for Percutaneous Closure of Atrial Septal Defect: A 3-Year Follow-Up

Objective

We reported the 3-year follow-up results of initial clinical experience with the Absnow^TM device, a novel biodegradable occluder for percutaneous closure of atrial septal defect (ASD).

Background

The Absnow^TM device is a total biodegradable septal occluder with double-disc poly-L-lactic acid (PLLA) framework and PLLA membranes intergraded into the device to ensure its biodegradability, clinical safety, and efficacy.

Methods

Five pediatric patients were enrolled from May to June 2018 in our institution and were followed up for 3 years. A clinical evaluation and transthoracic echocardiography were performed at 24 hr, 1 month, 3 months, 6 months, 12 months, and yearly after implantation. Primary endpoints were a composite clinical success, comprising of clinical closure success and safety at the 36-month follow-up evaluation. Secondary endpoints included technical success, procedure success, closure success, and safety at each of the follow-up visits.

Results

The median subject age was 3.6 years (range 3.1-6.5 years). The mean ASD diameter was (13.7 ± 2.9) mm. The median device size was 20 mm (range 14 to 24 mm). Technical and procedure success was achieved in 100% (5/5) of the patients. At 2-year follow-up, 3 of the 5 patients developed new-onset residual shunts and 2 of them reached a moderate degree. At 3-year follow-up, the residual shunt size increased over time in all the 3 patients, and 1 of them had right ventricular enlargement. All of the 5 patients were free from serious adverse events during the 3-year follow-up, with no device embolization, thromboembolization, or reintervention to the target defect.

Conclusion

This 3-year follow-up result of initial experience with the biodegradable Absnow^TM device has demonstrated acceptable safety with no procedural complications. Notably, the high rate of residual shunt significantly affected its efficacy. The long-term safety and efficacy of the device should be further evaluated in a large cohort of patients in future studies.

Key Regulatory Differentially Expressed Genes in the Blood of Atrial Septal Defect Children Treated With Occlusion Devices

Atrial septal defects (ASDs) are the most common types of cardiac septal defects in congenital heart defects. In addition to traditional therapy, interventional closure has become the main treatment method. However, the molecular events and mechanisms underlying the repair progress by occlusion device remain unknown. In this study, we aimed to characterize differentially expressed genes (DEGs) in the blood of patients treated with occlusion devices (metal or poly-L-lactic acid devices) using RNA-sequencing, and further validated them by qRT-PCR analysis to finally determine the expression of key mediating genes after closure of ASD treatment. The result showed that total 1,045 genes and 1,523 genes were expressed differently with significance in metal and poly-L-lactic acid devices treatment, respectively. The 115 overlap genes from the different sub-analyses are illustrated. The similarities and differences in gene expression reflect that the body response process involved after interventional therapy for ASDs has both different parts that do not overlap and the same part that crosses. The same portion of body response regulatory genes are key regulatory genes expressed in the blood of patients with ASDs treated with closure devices. The gene ontology enrichment analysis showed that biological processes affected in metal device therapy are immune response with CXCR4 genes and poly-L-lactic acid device treatment, and the key pathways are nuclear-transcribed mRNA catabolic process and proteins targeting endoplasmic reticulum process with ribosomal proteins (such as RPS26). We confirmed that CXCR4, TOB1, and DDIT4 gene expression are significantly downregulated toward the pre-therapy level after the post-treatment in both therapy groups by qRT-PCR. Our study suggests that the potential role of CXCR4, DDIT4, and TOB1 may be key regulatory genes in the process of endothelialization in the repair progress of ASDs, providing molecular insights into this progress for future studies.

Initial experiences with a novel biodegradable device for percutaneous closure of atrial septal defects: From preclinical study to first-in-human experience

Objective

To evaluate the feasibility, safety, and effectiveness of a novel, absorbable atrial septal defect (ASD) closure device made of poly‐l‐lactic acid (PLLA) in a swine model of ASD and for the first time in humans.

Methods

A preclinical safety study was conducted using a swine model of ASD. In a clinical setting, five pediatric patients underwent ASD closure with the PLLA device with fluoroscopic and transthoracic echocardiography guidance. The procedural results and clinical outcomes at 1 day, 30 days, 3 months, and 6 months after closure were analyzed.

Results

The 24‐ and 36‐month follow‐up results of the preclinical study demonstrated that the PLLA device exhibited good endothelialization and degradability in the swine model. In the clinical study, successful device implantation was achieved in all five patients (median age, 3.6 years; range, 3.1–6.5 years). The mean defect size was (13.6 ± 2.7) mm. Follow‐up at 30 days, 3 months, and 6 months was completed in all five cases. The complete defect closure rates with no residual shunt at 30 days, 3 months, and 6 months follow‐up were 60% (3/5), 80% (4/5), and 80% (4/5), respectively. No device dislodgement, significant aortic valve or mitral valve regurgitation, new onset cardiac arrhythmia, or other adverse events were reported.

Conclusion

The study results demonstrated that it is feasible to implant the PLLA device for closure of small to medium sized ASDs without significant residual shunts or severe adverse events in humans. The PLLA device exhibited good endothelialization and degradability in the swine model at 24 and 36 months. Further studies to evaluate long‐term safety and effectiveness with the device in a large cohort of patients are warranted.

Study of biodegradable occluder of atrial septal defect in a porcine model

Objective

To evaluate the safety and feasibility of a modified poly(l‐lactic acid) (PLLA) atrial septal defect (ASD) occluder.

Methods

Forty‐five piglets were divided into two groups: an experimental group (n = 27) and a control group (n = 18). The experimental group underwent percutaneous implantation of a modified PLLA ASD device while the control group underwent percutaneous implantation of a widely used metal ASD device. X‐ray imaging, transthoracic echocardiography (TTE), electrocardiogram (ECG), histopathology and electron microscopic examination were performed at 7 days, 1, 3, 6, and 12 months after implantation.

Results

Twenty‐seven experimental piglets and 18 control piglets were all successfully implanted with modified biodegradable and metal ASD devices, respectively. While both devices exhibited very good occluding effects, the modified PLLA ASD devices were completely endothelialized at 3 months after implantation, and the endothelialization appeared to be more complete compared to the control group. Degradation of the PLLA devices was noted at 12 months follow‐up with no loss of integrity at the atrial septum.

Conclusion

This animal model with implanting of the occluders was effective and not associated with complications. The modified PLLA ASD devices are more controllable and practical than our previous devices. The implanted devices demonstrated good endothelialization and degradability in short and moderate term follow‐up. Long‐term studies are now underway to further evaluate the biodegradability of this novel device.