Non-invasive procedural planning using computed tomography-derived fractional flow reserve

Computed Tomography-Derived Physiology Assessment: State-of-the-Art Review

Coronary computed tomography angiography (CCTA) and CCTA-derived fractional flow reserve (FFRCT) are the best non-invasive techniques to assess coronary artery disease (CAD) and myocardial ischemia. Advances in these technologies allow a paradigm shift to the use of CCTA and FFRCT for advanced plaque characterization and planning myocardial revascularization.

Coronary Physiology as Part of a State-of-the-Art Percutaneous Coronary Intervention Strategy: Lessons from SYNTAX II and Beyond

The use of coronary physiology allows for rational decision making at the time of PCI, contributing to better patient outcomes. Yet, coronary physiology is only one aspect of optimal revascularization. State-of-the-art PCI must also consider other important aspects such as intracoronary imaging guidance and specific procedural expertise, as tested in the SYNTAX II study. In this review, we highlight the technical aspects pertaining to the use of physiology as used in that trial and offer a glimpse into the future with emerging physiologic metrics, including functional coronary angiography, which have already established themselves as useful indices to guide decision making.

Coronary Physiology as Part of a State-of-the-Art Percutaneous Coronary Intervention Strategy: Lessons from SYNTAX II and Beyond

The use of coronary physiology allows for rational decision making at the time of PCI, contributing to better patient outcomes. Yet, coronary physiology is only one aspect of optimal revascularization. State-of-the-art PCI must also consider other important aspects such as intracoronary imaging guidance and specific procedural expertise, as tested in the SYNTAX II study. In this review, we highlight the technical aspects pertaining to the use of physiology as used in that trial and offer a glimpse into the future with emerging physiologic metrics, including functional coronary angiography, which have already established themselves as useful indices to guide decision making.

Computed Tomography-Derived Physiology Assessment: State-of-the-Art Review

Coronary computed tomography angiography (CCTA) and CCTA-derived fractional flow reserve (FFRCT) are the best non-invasive techniques to assess coronary artery disease (CAD) and myocardial ischemia. Advances in these technologies allow a paradigm shift to the use of CCTA and FFRCT for advanced plaque characterization and planning myocardial revascularization.

[Contribution of coroscanner in chronic coronary syndrome]

Cardiac division imaging by coroscanner has progressed a lot in 20 years to gradually become an important and potentially indispensable tool of chronic coronary cardiology. The European and American recommendations are Grade I for the assessment of symptomatic patients at intermediate to high risk, at the same level as traditional functional tests. The development of sophisticated post-treatment algorithms that apply the equations of fluid mechanics makes it possible to calculate an FFR value at any point from the CT image of the coronary artery. This FFR-CT is correctly correlated with invasive FFR compared to a threshold value of 0.80 and helps guide therapeutic choices. Thus, the coroscanner is a complement or an alternative to traditional functional tests and is positioned as a filter of access to coronary angiography, especially since it combines, from the same examination, a precise anatomical description, and a functional evaluation of the various possible lesions. Which is the Holy Grail of coronary cardiology.

Contemporary Management of Stable Coronary Artery Disease

Coronary artery disease (CAD) continues to be the leading cause of mortality and morbidity in developed countries. Assessment of pre-test probability (PTP) based on patient's characteristics, gender and symptoms, help to identify more accurate patient's clinical likelihood of coronary artery disease. Consequently, non-invasive imaging tests are performed more appropriately to rule in or rule out CAD rather than invasive coronary angiography (ICA). Coronary computed tomography angiography (CCTA) is the first-line non-invasive imaging technique in patients with suspected CAD and could be used to plan and guide coronary intervention. Invasive coronary angiography remains the gold-standard method for the identification and characterization of coronary artery stenosis. However, it is recommended in patients where the imaging tests are non-conclusive, and the clinical likelihood is very high, remembering that in clinical practice, approximately 30 to 70% of patients with symptoms and/or signs of ischemia, referred to coronary angiography, have non obstructive coronary artery disease (INOCA). In this contest, physiology and imaging-guided revascularization represent the cornerstone of contemporary management of chronic coronary syndromes (CCS) patients allowing us to focus specifically on ischemia-inducing stenoses. Finally, we also discuss contemporary medical therapeutic approach for secondary prevention. The aim of this review is to provide an updated diagnostic and therapeutic approach for the management of patients with stable coronary artery disease.

Coronary CT Angiography to Guide Percutaneous Coronary Intervention

Coronary CT angiography (CCTA) has emerged as a powerful noninvasive tool for characterizing the presence, extent, and severity of coronary artery disease (CAD) in patients with stable angina. Recent technological advancements in CT scanner hardware and software have augmented the rich information that can be derived from a single CCTA study. Beyond merely identifying the presence of CAD and assessing stenosis severity, CCTA now allows for the identification and characterization of plaques, lesion length, and fluoroscopic angle optimization, as well as enables the assessment of the physiologic extent of stenosis through CT-derived fractional flow reserve, and may even allow for the prediction of the response to revascularization. These and other features make CCTA capable of not only guiding invasive coronary angiography referral, but also give it the unique ability to help plan coronary intervention. This review summarizes current and future applications of CCTA in procedural planning for percutaneous coronary intervention, provides rationale for wider integration of CCTA in the workflow of the interventional cardiologist, and details how CCTA may help improve patient care and clinical outcomes. Keywords: CT Angiography © RSNA, 2022.

Computed Tomography Coronary Angiography and Computational Fluid Dynamics Based Fractional Flow Reserve Before and After Percutaneous Coronary Intervention

Invasive fractional flow reserve (FFR) is recommended to guide stent deployment. We previously introduced a non-invasive FFR calculation (FFR_B) based on computed tomography coronary angiography (CTCA) with reduced-order computational fluid dynamics (CFD) and resistance boundary conditions. Current study aimed to assess the feasibility and accuracy of FFR_B for predicting coronary hemodynamics before and after stenting, with invasive FFR as the reference. Twenty-five patients who had undergone CTCA were prospectively enrolled before invasive coronary angiography (ICA) and FFR-guided percutaneous coronary intervention (PCI) on 30 coronary vessels. Using reduced-order CFD with novel boundary conditions on three-dimensional (3D) patient-specific anatomic models reconstructed from CTCA, we calculated FFR_B before and after virtual stenting. The latter simulated PCI by clipping stenotic segments from the 3D coronary models and replacing them with segments to mimic the deployed coronary stents. Pre- and post-virtual stenting FFR_B were compared with FFR measured pre- and post-PCI by investigators blinded to FFR_B results. Among 30 coronary lesions, pre-stenting FFR_B (mean 0.69 ± 0.12) and FFR (mean 0.67 ± 0.13) exhibited good correlation (r = 0.86, p < 0.001) and agreement [mean difference 0.024, 95% limits of agreement (LoA): −0.11, 0.15]. Similarly, post-stenting FFR_B (mean 0.84 ± 0.10) and FFR (mean 0.86 ± 0.08) exhibited fair correlation (r = 0.50, p < 0.001) and good agreement (mean difference 0.024, 95% LoA: −0.20, 0.16). The accuracy of FFR_B for identifying post-stenting ischemic lesions (FFR ≤ 0.8) (residual ischemia) was 87% (sensitivity 80%, specificity 88%). Our novel FFR_B, based on CTCA with reduced-order CFD and resistance boundary conditions, accurately predicts the hemodynamic effects of stenting which may serve as a tool in PCI planning.

A multiscale model of vascular function in chronic thromboembolic pulmonary hypertension

Chronic thromboembolic pulmonary hypertension (CTEPH) is caused by recurrent or unresolved pulmonary thromboemboli, leading to perfusion defects and increased arterial wave reflections. CTEPH treatment aims to reduce pulmonary arterial pressure and reestablish adequate lung perfusion, yet patients with distal lesions are inoperable by standard surgical intervention. Instead, these patients undergo balloon pulmonary angioplasty (BPA), a multisession, minimally invasive surgery that disrupts the thromboembolic material within the vessel lumen using a catheter balloon. However, there still lacks an integrative, holistic tool for identifying optimal target lesions for treatment. To address this insufficiency, we simulate CTEPH hemodynamics and BPA therapy using a multiscale fluid dynamics model. The large pulmonary arterial geometry is derived from a computed tomography (CT) image, whereas a fractal tree represents the small vessels. We model ring- and web-like lesions, common in CTEPH, and simulate normotensive conditions and four CTEPH disease scenarios; the latter includes both large artery lesions and vascular remodeling. BPA therapy is simulated by simultaneously reducing lesion severity in three locations. Our predictions mimic severe CTEPH, manifested by an increase in mean proximal pulmonary arterial pressure above 20 mmHg and prominent wave reflections. Both flow and pressure decrease in vessels distal to the lesions and increase in unobstructed vascular regions. We use the main pulmonary artery (MPA) pressure, a wave reflection index, and a measure of flow heterogeneity to select optimal target lesions for BPA. In summary, this study provides a multiscale, image-to-hemodynamics pipeline for BPA therapy planning for patients with inoperable CTEPH. NEW & NOTEWORTHY This article presents novel computational framework for predicting pulmonary hemodynamics in chronic thromboembolic pulmonary hypertension. The mathematical model is used to identify the optimal target lesions for balloon pulmonary angioplasty, combining simulated pulmonary artery pressure, wave intensity analysis, and a new quantitative metric of flow heterogeneity.

Non-invasive MRI Derived Hemodynamic Simulation to Predict Successful vs. Unsuccessful Catheter Interventions for Branch Pulmonary Artery Stenosis: Proof-of-Concept and Experimental Validation in Swine

OBJECTIVE

This study assessed the ability of hemodynamic simulations to predict the success of catheter interventions in a swine model of branch pulmonary artery stenosis (bPAS).

BACKGROUND

bPAS commonly occurs in congenital heart disease and is often managed with catheter based interventions. However, despite technical success, bPAS interventions do not lead to improved distal pulmonary blood flow (PBF) distribution in approximately 1/3rd of patients. New tools are needed to better identify which patients with bPAS would most benefit from catheter interventions.

METHODS

For 13 catheter intervention cases in swine with surgically created left PAS (LPAS), PA pressures from right heart catheterization (RHC) and PBF distributions from MRI were measured before and after catheter interventions. Hemodynamic simulations with a reduced order computational fluid dynamics (CFD) model were performed using non-invasive PBF measurements derived from MRI, and then correlated with changes in invasive measures of hemodynamics and PBF distributions before and after catheter intervention to relieve bPAS.

RESULTS

Compared to experimentally measured changes in left PBF distribution, simulations had a small bias (3.4 ± 11.1%), moderate agreement (ICC = 0.69 [0.24-0.90], 0.71 [0.23-0.91]), and good diagnostic capability to predict successful interventions (> 20% PBF increase) (AUC 0.83 [0.59-1.0]). Simulations had poorer prediction of changes in stenotic pressure gradient (ICC = 0.28 [- 0.33 to 0.73], r = 0.57 [- 0.04 to 0.87]) and MPA systolic pressure (ICC = 0.00 [- 0.52 to 0.53], r = 0.29 [- 0.32 to 0.72]).

CONCLUSION

While there was only weak to moderate agreement between predicted and measured changes in PA pressures and pulmonary blood flow distributions, hemodynamic simulations did show good diagnostic value for predicting successful versus unsuccessful catheter based interventions to relieve bPAS. The results of this proof of concept study are promising and should encourage future development for using hemodynamic models in planning interventions for patients with bPAS.

The Use of Subclinical Atherosclerosis Imaging to Guide Preventive Cardiology Management

PURPOSE OF THE REVIEW

Clinical atherosclerotic cardiovascular disease (ASCVD) requires years to manifest, providing a window of opportunity for preventive cardiovascular management. Subclinical atherosclerosis imaging leverages this long latency period to estimate and improve future ASCVD risk.

RECENT FINDINGS

Coronary artery calcium (CAC) scoring has the most robust data in the detection of subclinical atherosclerosis. CAC scan significantly enhances cardiovascular risk stratification in addition to traditional risk models. Coronary computed tomography angiography data show similar strengths in subclinical atherosclerosis detection in addition to plaque morphology characterization with inherent limitations. Carotid intima-media thickness and ankle-brachial index are other modalities whose predictive value becomes incremental when added to the aforementioned modalities. When added to traditional risk models, subclinical atherosclerosis imaging modalities personalize future ASCVD risk stratification and assist in the initiation and rate of intensification of preventive therapies. Emerging imaging techniques exist but further research is required for primetime clinical use.

Angio-Based Fractional Flow Reserve, Functional Pattern of Coronary Artery Disease, and Prediction of Percutaneous Coronary Intervention Result: a Proof-of-Concept Study

PURPOSE

Wire-based coronary physiology pullback performed before percutaneous coronary intervention (PCI) discriminates coronary artery disease (CAD) distribution and extent, and is able to predict functional PCI result. No research investigated if quantitative flow ratio (QFR)-based physiology assessment is able to provide similar information.

METHODS

In 111 patients (120 vessels) treated with PCI, QFR was measured both before and after PCI. Pre-PCI QFR trace was used to discriminate functional patterns of CAD (focal, serial lesions, diffuse disease, combination). Functional CAD patterns were identified analyzing changes in the QFR virtual pullback trace (qualitative method) or after computation of the QFR virtual pullback index (QVP_index) (quantitative method). QVP_index calculation was based on the maximal QFR drop over 20 mm and the length of epicardial coronary segment with QFR most relevant drop. Then, the ability of the different functional patterns of CAD to predict post-PCI QFR value was tested.

RESULTS

By qualitative method, 51 (43%), 20 (17%), 15 (12%), and 34 (28%) vessels were classified as focal, serial focal lesions, diffuse disease, and combination, respectively. QVP_index values >0.71 and ≤0.51 predicted focal and diffuse patterns, respectively. Suboptimal PCI result (post-PCI QFR value ≤0.89) was present in 22 (18%) vessels. Its occurrence differed across functional patterns of CAD (focal 8% vs. serial lesions 15% vs. diffuse disease 33% vs. combination 29%, p=0.03). Similarly, QVP_index was correlated with post-PCI QFR value (r=0.62, 95% CI 0.50-0.72).

CONCLUSION

Our results suggest that functional patterns of CAD based on pre-PCI QFR trace can predict the functional outcome after PCI.

CLINICAL TRIAL REGISTRATION

ClinicalTrials.gov , number NCT02811796. Date of registration: June 23, 2016.

Rationale and design of the precise percutaneous coronary intervention plan (P3) study: Prospective evaluation of a virtual computed tomography-based percutaneous intervention planner

Introduction

Fractional flow reserve (FFR) measured after percutaneous coronary intervention (PCI) has been identified as a surrogate marker for vessel related adverse events. FFR can be derived from standard coronary computed tomography angiography (CTA). Moreover, the FFR derived from coronary CTA (FFR_CT) Planner is a tool that simulates PCI providing modeled FFR_CT values after stenosis opening.

Aim

To validate the accuracy of the FFR_CT Planner in predicting FFR after PCI with invasive FFR as a reference standard.

Methods

Prospective, international and multicenter study of patients with chronic coronary syndromes undergoing PCI. Patients will undergo coronary CTA with FFR_CT prior to PCI. Combined morphological and functional evaluations with motorized FFR hyperemic pullbacks, and optical coherence tomography (OCT) will be performed before and after PCI. The FFR_CT Planner will be applied by an independent core laboratory blinded to invasive data, replicating the invasive procedure. The primary objective is to assess the agreement between the predicted FFR_CT post‐PCI derived from the Planner and invasive FFR. A total of 127 patients will be included in the study.

Results

Patient enrollment started in February 2019. Until December 2020, 100 patients have been included. Mean age was 64.1 ± 9.03, 76% were males and 24% diabetics. The target vessels for PCI were LAD 83%, LCX 6%, and RCA 11%. The final results are expected in 2021.

Conclusion

This study will determine the accuracy and precision of the FFR_CT Planner to predict post‐PCI FFR in patients with chronic coronary syndromes undergoing percutaneous revascularization.

Physiologic Assessment after Coronary Stent Implantation

The presence of myocardial ischemia is a prerequisite for the benefit of coronary revascularization. In the cardiac catheterization laboratory, fractional flow reserve and non-hyperemic pressure ratios are used to define the ischemia-causing coronary stenosis, and several randomized studies showed the benefit of physiology-guided coronary revascularization. However, physiology-guided revascularization does not necessarily guarantee the relief of ischemia. Recent studies reported that residual ischemia might exist in up to 15-20% of cases after angiographically successful percutaneous coronary intervention (PCI). Therefore, post-PCI physiologic assessment is necessary for judging the appropriateness of PCI, detecting the lesions that may benefit from additional PCI, and risk stratification after PCI. This review will focus on the current evidence for post-PCI physiologic assessment, how to interpret these findings, and the future perspectives of physiologic assessment after PCI.

Non-invasive procedural planning using computed tomography-derived fractional flow reserve

Objectives

This study aimed to investigate the performance of computed tomography derived fractional flow reserve based interactive planner (FFR_CT planner) to predict the physiological benefits of percutaneous coronary intervention (PCI) as defined by invasive post‐PCI FFR.

Background

Advances in FFR_CT technology have enabled the simulation of hyperemic pressure changes after virtual removal of stenoses.

Methods

In 56 patients (63 vessels) invasive FFR measurements before and after PCI were obtained and FFR_CT was calculated using pre‐PCI coronary CT angiography. Subsequently, FFR_CT and invasive coronary angiography models were aligned allowing virtual removal of coronary stenoses on pre‐PCI FFR_CT models in the same locations as PCI was performed. Relationships between invasive FFR and FFR_CT, between post‐PCI FFR and FFR_CT planner, and between delta FFR and delta FFR_CT were evaluated.

Results

Pre PCI, invasive FFR was 0.65 ± 0.12 and FFR_CT was 0.64 ± 0.13 (p = .34) with a mean difference of 0.015 (95% CI: −0.23–0.26). Post‐PCI invasive FFR was 0.89 ± 0.07 and FFR_CT planner was 0.85 ± 0.07 (p < .001) with a mean difference of 0.040 (95% CI: −0.10–0.18). Delta invasive FFR and delta FFR_CT were 0.23 ± 0.12 and 0.21 ± 0.12 (p = .09) with a mean difference of 0.025 (95% CI: −0.20–0.25). Significant correlations were found between pre‐PCI FFR and FFR_CT (r = 0.53, p < .001), between post‐PCI FFR and FFR_CT planner (r = 0.41, p = .001), and between delta FFR and delta FFR_CT (r = 0.57, p < .001).

Conclusions

The non‐invasive FFR_CT planner tool demonstrated significant albeit modest agreement with post‐PCI FFR and change in FFR values after PCI. The FFR_CT planner tool may hold promise for PCI procedural planning; however, improvement in technology is warranted before clinical application.