Metal allergy patient treated by titanium implant denture: A case report with at least 4-year follow-up

Bioglass and Vitamin D3 Coatings for Titanium Implants: Osseointegration and Corrosion Protection

The use of MAPLE synthesized thin films based on BG and VD3 for improving the osseointegration and corrosion protection of Ti-like implant surfaces is reported. The distribution of chemical elements and functional groups was shown by FTIR spectrometry; the stoichiometry and chemical functional integrity of thin films after MAPLE deposition was preserved, optimal results being revealed especially for the BG+VD3_025 samples. The morphology and topography were examined by SEM and AFM, and revealed surfaces with many irregularities, favoring a good adhesion of cells. The thin films' cytotoxicity and biocompatibility were evaluated in vitro at the morphological, biochemical, and molecular level. Following incubation with HDF cells, BG57+VD3_ 025 thin films showed the best degree of biocompatibility, as illustrated by the viability assay values. According to the LDH investigation, all tested samples had higher values compared to the unstimulated cells. The evaluation of cell morphology was performed by fluorescence microscopy following cultivation of HDF cells on the obtained thin films. The cultivation of HDF's on the thin films did not induce major cellular changes. Cells cultured on the BG57+VD3_025 sample had similar morphology to that of unstimulated control cells. The inflammatory profile of human cells cultured on thin films obtained by MAPLE was analyzed by the ELISA technique. It was observed that the thin films did not change the pro- and anti-inflammatory profile of the HDF cells, the IL-6 and IL-10 levels being similar to those of the control sample. The wettability of the MAPLE thin films was investigated by the sessile drop method. A contact angle of 54.65° was measured for the sample coated with BG57+VD3_025. Electrochemical impedance spectroscopy gave a valuable insight into the electrochemical reactions occurring on the surface.

Examination of colorectal cancer cases with metal allergy

PURPOSE

To report our initiatives and treatment results for patients with colorectal cancer with metal allergy.

METHODS

A total of 27 patients (2.6%) with a history of metal contact dermatitis were identified among 1027 patients who underwent curative resection of colorectal cancer from 2014 to 2020. The results of the patch test, perioperative results, and postoperative colonoscopy findings were also investigated.

RESULTS

The patch test for metal allergens and staples was performed in 21 patients (77.8%), and 13 of them (61.9%) tested positive for at least one metal allergen. Ni (38.1%), Co (28.6%), and Pd (19.0%) showed higher positive rates than other metals, and 1 patient (4.8%) tested positive for staples. Stapled anastomosis/suturing was performed as planned in 15 of 27 patients. In 10 patients, the anastomosis method was changed from stapled to hand-sewn according to the no-patch test results (60%), positivity for multiple metals (20%), positivity for staples (10%), and surgeon's judgment (10%). No complications and abnormal colonoscopy findings were found to be associated with stapled anastomosis/suturing.

CONCLUSION

The patch test is useful for selecting an optimal anastomosis method for patients with suspected metal allergy.

Titanium Allergy Caused by Dental Implants: A Systematic Literature Review and Case Report

(1) Background: Hypersensitivity reactions to metals may arise in predisposed patients chronically exposed to metallic materials, including dental implants made of titanium alloys. The purpose of this article was to systematically review titanium allergy manifestations in patients treated with dental implants and report a clinical case; (2) Methods: A systematic electronic search was performed for articles published in the English language until July 2021. The following eligibility criteria were adopted: (1) Population: individuals undergoing titanium and/or titanium alloy implant-supported rehabilitations; (2) Exposure: peri-implant soft tissue reactions attributable to implant insertion; (3) Outcome: evidence of titanium allergy, diagnostic methods, and forms of resolution; (3) Results: The included studies, in summary, presented evidence that titanium should not be considered an inert material, being able to trigger allergic reactions, and may be responsible for implant failure. A 55-year-old male patient received 3 implants in the posterior region of the left mandible and presented an epulis-like lesion developed from the peri-implant mucosa. The immunohistochemical analysis of the biopsy specimen confirmed the initial diagnosis of allergic reaction to titanium; (4) Conclusions: Although the evidence is weak, and titanium allergy has a low incidence, hypersensitivity reactions should not be underestimated. A rapid and conclusive diagnosis is mandatory to prevent further complications.

Type IV hypersensitivity associated with restorative materials: Clinical report and systematic literature review

STATEMENT OF PROBLEM

Type IV hypersensitivity reactions (Type IV HR) are immune responses mediated by antigen-specific effector T cells.

PURPOSE

The purpose of this clinical report and systematic review was to report the clinicopathological features of Type IV HR in the oral mucosa and to present a systematic literature review of case reports and case series of individuals with Type IV HR in the oral mucosa related to contact with dental materials.

MATERIAL AND METHODS

The presented clinical lesions were melanotic macules with burning that affected the internal labial mucosa in contact with composite resin veneer crowns. Histopathological and immunohistochemical analysis of the lesion was performed. The systematic literature review was performed based on a search in 4 electronic databases (PubMed/MEDLINE, Scopus, Web of Science, and Ovid).

RESULTS

Immunohistochemistry showed positivity for CD4, CD8, CD20, CD3, tryptase, and CD117. After conservative treatment, the patient reported improvement of symptoms, and a decrease in the number of inflammatory cells was verified. Twenty-one articles were included in the review. Unlike the present patient, the authors of all the articles recommended radical treatment with the removal of the dental material.

CONCLUSIONS

Type IV HR in oral mucosa is rare, and the assessment of clinical and histopathological characteristics is essential to perform an accurate diagnosis and provide appropriate treatment.

Biofilm Formation on the Surface of (Poly)Ether-Ether-Ketone and In Vitro Antimicrobial Efficacy of Photodynamic Therapy on Peri-Implant Mucositis

Poly-ether-ether-ketone (PEEK) is an aesthetically pleasing natural material with good biocompatibility and shock absorption characteristics. The application of PEEK as a dental implant or abutment is expected to reduce the risk of failure and enhance aesthetics. Given that approximately one in 15 patients have allergic reactions to antibiotics, photodynamic therapy (PDT) has been gaining attention as an alternative treatment. Herein, the applicability of PEEK dental implants or abutments was investigated using material analyses, biofilm formation assay, and cell viability tests. The possible use of PDT for peri-implant mucositis was evaluated with the biofilm removal assay. The obtained data were analyzed based on the multivariate analysis of variance, paired t-tests, and the Pearson correlation coefficient (α = 0.05). The results revealed that PEEK was significantly less conducive to the formation of biofilms with S. mutans and A. actinomycetemcomitan (p < 0.001) but exhibited comparable MG-63 (human osteoblast-like) osteoblast cell viability (p > 0.05) to the other materials. PDT had similar antimicrobial efficacy and yielded similar biofilm removal effects to antibiotics. Altogether, these findings suggest that PEEK has attractive features and can serve as an alternative material for dental implants or abutments. In cases where peri-implant mucositis occurs, PDT can be used as an accessible therapeutic approach.

Multiple cutaneous fistula after titanium dental implant: A case report

BACKGROUND

Dental implants allow functional and aesthetic reestablishment. Titanium (Ti) implants emerge as the preferred choice because Ti is considered an inert material, highly resistant to corrosion. However, virtually no material can be considered universally biocompatible and this includes titanium.

PURPOSE

To report an unusual presentation of inflammatory reaction after a Ti dental implant.

MATERIALS AND METHODS

The patient presented to a dermatology clinic to evaluate lesions on her face. She reported the placement of dental implants 2 years earlier, one of which evolved with inflammatory signs and instability a few days after the procedure. As anti-inflammatory and antibiotic therapy were fruitless, after 3 months the implant was removed, but the inflammation persisted. On physical examination, painful erythematous-papule-nodular lesions were found on the left mandibular and submandibular region.

RESULTS

Culture tests for microorganisms were negative and histopathological examination revealed a chronic fistula with a foreign body reaction. Using X-ray fluorescence, Ti particles were found along the fistula wall.

CONCLUSIONS

Professionals should be aware of complications arising from dental implants, including Ti implants. Detailed anamnesis and laboratory investigation can assure diagnosis for specific therapeutic approaches.

Titanium salts tested in reconstructed human skin with integrated MUTZ-3-derived Langerhans cells show an irritant rather than a sensitizing potential

BACKGROUND

The nature of clinically related adverse reactions to titanium is still unknown.

OBJECTIVE

To determine whether titanium salts have irritant or sensitizing potential in a reconstructed human skin (RHS) model with integrated Langerhans cells (LCs).

METHODS

RHS-LCs (ie, reconstructed epidermis) containing primary differentiated keratinocytes and CFSE⁺ CD1a⁺ -LCs generated from the MUTZ-3 cell line on a primary fibroblast-populated collagen hydrogel (dermis) were topically exposed to titanium(IV) bis(ammonium lactato)dihydroxide (TiALH). LC migration and plasticity were determined.

RESULTS

TiALH resulted in CFSE⁺ CD1a⁺ -LC migration out of the epidermis. Neutralizing antibodies to CCL5 and CXCL12 showed that LC migration was CCL5 and not CXCL12 mediated. LCs accumulating within the dermis after TiALH exposure were CFSE⁺ Lang⁺ CD68⁺ which is characteristic of a phenotypic switch of MUTZ-LC to a macrophage-like cell. Furthermore, TiALH did not result in increased interleukin (IL)-1β or CCR7 messenger RNA (mRNA) in the dermis, but did result in increased IL-10 mRNA. In addition, monocultures of MUTZ-LCs failed to increase LC maturation biomarkers CD83, CD86, and CXCL-8 when exposed to noncytotoxic concentrations of four different titanium salts.

CONCLUSION

These results classify titanium salts as irritants rather than sensitizers and indicate that titanium implant-related complaints could be due to localized irritant-mediated inflammation arising from leachable agents rather than a titanium metal allergy.

Bioactive Coating on Titanium Dental Implants for Improved Anticorrosion Protection: A Combined Experimental and Theoretical Study

In recent years, extensive studies have been continuously undertaken on the design of bioactive and biomimetic dental implant surfaces due to the need for improvement of the implant–bone interface properties. In this paper, the titanium dental implant surface was modified by bioactive vitamin D3 molecules by a self-assembly process in order to form an improved anticorrosion coating. Surface characterization of the modified implant was performed by field emission scanning electron microscopy (FE-SEM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and contact angle measurements (CA). The implant’s electrochemical stability during exposure to an artificial saliva solution was monitored in situ by electrochemical impedance spectroscopy (EIS). The experimental results obtained were corroborated by means of quantum chemical calculations at the density functional theory level (DFT). The formation mechanism of the coating onto the titanium implant surface was proposed. During a prolonged immersion period, the bioactive coating effectively prevented a corrosive attack on the underlying titanium (polarization resistance in order of 107 Ω cm2) with ~95% protection effectiveness.