The use of bidirectional barbed suture in the treatment of a complete common calcanean tendon rupture in a dog: Long-term clinical and ultrasonographic evaluation

A randomized trial to compare smooth monofilament suture vs. barbed suture using the three-layer continuous closure technique in canine ovariohysterectomy in a high-quality high-volume spay/neuter clinic

The primary objective of this study was to compare time efficiency and complication rates between smooth monofilament suture (SMS) and barbed suture (BS) using the three-layer continuous incisional closure pattern after ovariohysterectomy in a high-quality high-volume spay/neuter clinic. The study was designed as a randomized controlled trial enrolling 71 adult female dogs. Dogs were randomly assigned to SMS or BS treatments. The effect of closure with BS or SMS on closure time was tested through multilevel, multivariable linear regression in a generalized linear mixed model. Body condition score, weight, and pre-closure incision length were tested as covariates. Surgeon was included in the model as a random effect. Pre-closure incision length (p = 0.01) and method (p ≤ 0.0001) were associated with closure time. Adjusting for pre-closure incision length, the average time for closure with SMS was 6.5 min (range 3.70-10.31 min), and the average time for closure with BS was 4.91 min (range 3.05-8.05 min). Accounting for the closure method, the closure time increased by 39 s for each additional centimeter of incision length. BS was more efficient than SMS when performing the three-layer continuous suture pattern. No short-term telemedicine-assessed complications were noted with either treatment method. BS can improve efficiency in surgical closures, especially considering large volumes of animals, and appears to have a similar short-term, telemedicine-assessed complication rate when compared to SMS.

Ex-vivo biomechanical analysis of an original repair of canine calcaneal tendon rupture using a synthetic implant as mechanical support fixed by sutures in the proximal tendinous part and by an interference screw in the bone distal part

Background

Rupture of the common calcaneal tendon is the second most frequent tendon rupture in dogs and may lead to severe lameness and pain. Surgical repair consists of re-apposition of the damaged tendon ends using sutures, but this type of repair is not always possible especially if the tendon has retracted. Tendon augmentation with an ultra-high molecular weight polyethylene (UHMWPE) implant is a recent solution to support the sutures and allow the repair of the canine calcaneal tendon. However, its biomechanical fixation strength remains untested for this pathology.

Aim

To evaluate the biomechanical fixation strength of a UHMWPE implant for the repair of the canine calcaneal tendon.

Methods

Ex-vivo biomechanical study was carried out on eight cadaveric hindlimbs from four adult dogs. Hindlimbs were tested under two independent modalities: proximal tendinous fixation (PTF) and distal calcaneus fixation (DCF), using a testing machine. PTF was achieved by eight simple interrupted polypropylene sutures performed through the UHMWPE implant. The latter was sandwiched inside the gastrocnemius tendon, which had previously been incised over about 5 cm longitudinally, and through the tendon of the superficial digital flexor. DCF was performed using an interference screw, which locked the UHMWPE implant into a calcaneus tunnel drilled perpendicularly.

Results

Yield, failure load, and linear stiffness (mean ± SD) for the DCF modality were 920 ± 139 N, 1,007 ± 146 N, and 92 ± 15.21, respectively, which were greater than for the PTF modality (663 ± 92 N, 685 ± 84 N and 25.71 ± 5.74, respectively, p < 0.05). Failure modes were different between fixation modalities: for PTF it was suture breakage (n = 7/8), while for DCF it was implant damage and slippage (n = 8/8).

Conclusion

The biomechanical fixation strength of the UHMWPE implant was greater for DCF than that of PTF, and should be suitable for calcaneal tendon repair in dogs. The clinical prediction of rupture of this calcaneal tendon repair will occur at the level of the PTF.

Comparison of the mechanical properties and anchoring performance of polyvinylidene fluoride and polypropylene barbed sutures for tendon repair

Polyvinylidene fluoride (PVDF) has been considered as an alternative suture material to replace polypropylene (PP) due to its superior biocompatibility and mechanical properties, but it has never been examined for use in barbed sutures, particularly for tendon repair. This study fabricated size 2–0 PVDF and PP bidirectional barbed sutures and compared their mechanical properties and anchoring performance in patellar tendons. The mechanical properties were evaluated via tensile testing, and the anchoring performance of the barbed sutures was assessed by a tendon suture pullout test. Sixty porcine patellar tendons were harvested, transected to mimic a full‐thickness injury, and repaired using a cross‐locked cruciate suturing technique. The ultimate tensile force was 60% higher for the PVDF barbed sutures (22.4 ± 2.1 N) than for the PP barbed sutures (14.0 ± 1.7 N). The maximum pullout force was 35% higher for PVDF barbed sutures (70.8 ± 7.8 N) than for PP barbed sutures (52.4 ± 5.8 N). The force needed to form a 2‐mm gap, indicative of repair failure, was similar between the PVDF (29.2 ± 5.0 N) and PP (25.6 ± 3.1 N) barbed sutures, but both were greater than the 2‐mm‐gap forces for non‐barbed sutures of the same size. In this study, PVDF barbed sutures provided better mechanical properties and improved tissue anchoring performance compared to the barbed PP sutures for porcine patellar tendon repair, demonstrating that PVDF monofilament sutures can be barbed and used effectively for tendon repair.

Evaluation of barbed suture for celiorrhaphy and subcutaneous closure in bitches with pyometra submitted to ovariohysterectomy

Purpose

To evaluate the use of barbed sutures over the surgical time, the leukogram, the tissue thickness in which the sutures were employed (ultrasonography), the costs, and the possible complications in bitches with pyometra submitted to ovariohysterectomy (OH).

Methods

Convectional 2.0 polyglyconate suture was used in the control group (CG n = 10) and 2.0 barbed polyglyconate suture in the barbed group (BG n = 10) to perform celiorrhaphy (simple continuous pattern) and subcutaneous closure (continuous intradermal pattern). Data were assessed using paired (leukogram between 24 and 48 h within the same group) and unpaired (leukogram, surgical time, tissue thickness, and costs) Student’s t-test. The Fisher exact test was used to assess the occurrence of seroma between groups (p < 0.05). Results are shown as mean ± standard error of mean.

Results

The time spent to perform the celiorrhaphy (195.30 ± 17.37 s vs. 204 ± 16.00 s), subcutaneous closure (174.0 ± 15.86 s vs. 198.0 ± 15.62 s), and the total surgical time (24.30 ± 1.44 min vs. 23.00 ± 1.30 min) did not differ between BG and CG, respectively (p > 0.05). Leukogram at 48 h post-surgery did not differ between groups (p = 0.20). No differences were observed in the subcutaneous and the abdominal wall thickness (cm) assessed by ultrasonography at 48 h in BG (0.31 ± 0.04, 0.80 ± 0.05) and CG (0.34 ± 0.03, 0.72 ± 0.06), respectively. Similarly, 15 days post-surgery the same structures did not differ between BG (0.26 ± 0.02, 0.74 ± 0.08) and CG (0.26 ± 0.03, 0.64 ± 0.05) (p > 0.05). In one bitch from each group, a mild seroma was observed on one side of the surgical wound 48 h after surgery (p = 1.00). The procedures in which barbed sutures were used had an average additional cost of R$ 200.00 ± 11.66 (p < 0.0001).

Conclusions

Barbed suture has proven to be efficient and safe for abdominal and subcutaneous closure. However, considering its current high cost in addition thatthe surgical time of bitches with pyometra undergone OH was not reduced, no advantages were observed with theuse of barbed sutures for this type of surgery.

Biomechanical evaluation of a novel barbed suture pattern with epitendinous suture augmentation in a canine flexor tendon model

OBJECTIVE

To determine the effect of a novel barbed suture pattern (NBSP) compared to a three-loop-pulley (3LP) with and without epitendinous suture (ES) augmentation on the biomechanical strength and gap formation of repaired canine tendons.

STUDY DESIGN

Ex vivo, cadaveric, randomized, experimental study.

SAMPLE POPULATION

Forty, adult superficial digital flexor tendons (SDFT).

METHODS

SDFT were randomly assigned to one of four groups (n = 10/group). Sharp tenotomy was performed and repaired with 3LP, NBSP, 3LP + ES, and NBSP + ES. Constructs were tested to failure while evaluating yield, peak, and failure loads, loads at 1 and 3 mm gap formation, and failure mode.

RESULTS

Constructs augmented with ES sustained 80% greater yield (p < .001), peak (p < .001), and failure (p < .001) loads, with no difference between 3LP + ES and NBSP + ES constructs regarding peak (p = .614), and failure forces (p = .865). Loads resulting in 1 and 3 mm gap formation were greater when constructs were augmented with an ES (p ≤ .003). Failure mode differed between groups (p < .001), occurring predominantly due to suture pull-through in 3LP and NBSP groups compared to tissue failure distant to the repair site in ES augmented constructs.

CONCLUSION

Tendons repaired with the NBSP used in this study resisted similar forces as those repaired with 3LP. Augmentation with an ES improved the biomechanical properties of repaired constructs, including resistance to gap formation.

CLINICAL RELEVANCE

The NBSP repair tested here may be advantageous over monofilament suture repair as it uses a similar-sized barbed core suture but eliminates the requirement for knot tying.