Heterogeneously Catalyzed Ammoxidation: A Valuable Tool for One-Step Synthesis of Nitriles

Photochemical Synthesis of Nitriles from Alcohols

Nickel-catalyzed hydrocyanation of 1,3-butadiene with hydrogen cyanide gas is the predominant method for the synthesis of adiponitrile, which is an important precursor for polymer production. However, the use of fossil-derived alkenes raises environmental concerns, and hydrogen cyanide is highly volatile and extremely toxic. Herein, we report the use of biomass-derived 1,4-butanediol, as well as other primary alcohols, for photochemical synthesis of linear and branched nitriles and dinitriles, including adiponitrile, with 1,4-dicyanobenzene as the CN source. This mild, sustainable method does not require hydrogen cyanide gas or an air- or moisture-sensitive metal catalyst and is applicable for the production of dinitriles as precursors of diamines, which have potential utility for the development of novel polyamides.

Low-temperature redox activity and alcohol ammoxidation performance on Cu- and Ru-incorporated ceria catalysts

Transition-metal-incorporated cerium oxides with Cu and a small amount of Ru (Cu0.18Ru0.05CeOz) were prepared, and their low-temperature redox performance (<423 K) and catalytic alcohol ammoxidation performance were investigated. Temperature-programmed reduction/oxidation under H2/O2 and in situ X-ray absorption fine structure revealed the reversible redox behavior of the three metals, Cu, Ru, and Ce, in the low-temperature redox processes. The initially reduced Ru species decreased the reduction temperature of Cu oxides and promoted the activation of Ce species. Cu0.18Ru0.05CeOz selectively catalyzed the production of benzonitrile in the ammoxidation of benzyl alcohol. H2-treated Cu0.18Ru0.05CeOz showed a slightly larger initial conversion of benzyl alcohol than O2-treated Cu0.18Ru0.05CeOz, suggesting that the reduced structure of Cu0.18Ru0.05CeOz was active for the ammoxidation. The integration of both Cu and Ru resulted in the efficient promotion of ammoxidation, in which the Ru species were involved in the conversion of benzyl alcohol and Cu species were required for selective production of benzonitrile.

Light-Triggered, Ni-Catalyzed Cyanation of Aryl Triflates with 1,4-Dicyanobenzene as the CN Source

A light-triggered, Ni-catalyzed cyanation of aryl triflates was herein reported, which provides a benign photochemical synthesis of aryl nitriles using 1,4-dicyanobenzene as the CN source instead of HCN or a metallic CN source. This mild method uses a readily available bisphosphine ligand and a soluble organosilicon reagent as the reductant and is carried out under purple light without an external photocatalyst. This cyanation was effective for aryl triflates derived from phenols and bisphenols as well as lignin-derived phenolic compounds, demonstrating its potential utility for the synthesis of aryl nitriles from biomass.

Iron/vanadium co-doped tungsten oxide nanostructures anchored on graphitic carbon nitride sheets (FeV-WO3@g-C3N4) as a cost-effective novel electrode material for advanced supercapacitor applications

In this work, we studied the effect of iron (Fe) and vanadium (V) co-doping (Fe/V), and graphitic carbon nitride (g-C3N4) on the performance of tungsten oxide (WO3) based electrodes for supercapacitor applications. The lone pair of electrons on nitrogen can improve the surface polarity of the g-C3N4 electrode material, which may results in multiple binding sites on the surface of electrode for interaction with electrolyte ions. As electrolyte ions interact with g-C3N4, they quickly become entangled with FeV-WO3 nanostructures, and the contact between the electrolyte and the working electrode is strengthened. Herein, FeV-WO3@g-C3N4 is fabricated by a wet chemical approach along with pure WO3 and FeV-WO3. All of the prepared samples i.e., WO3, FeV-WO3, and FeV-WO3@g-C3N4 were characterized by XRD, FTIR, EDS, FESEM, XPS, Raman, and BET techniques. Electrochemical performance is evaluated by cyclic voltammetry (CV), galvanic charge/discharge (GCD), and electrochemical impedance spectroscopy (EIS). It is concluded from electrochemical studies that FeV-WO3@g-C3N4 exhibits the highest electrochemical performance with specific capacitance of 1033.68 F g-1 at scan rate 5 mV s-1 in the potential window range from -0.8 to 0.25 V, that is greater than that for WO3 (422.76 F g-1) and FeV-WO3 (669.76 F g-1). FeV-WO3@g-C3N4 has the highest discharge time (867 s) that shows it has greater storage capacity, and its coulombic efficiency is 96.7%, which is greater than that for WO3 (80.1%) and FeV-WO3 (92.1%), respectively. Furthermore, excellent stability up to 2000 cycles is observed in FeV-WO3@g-C3N4. It is revealed from EIS measurements that equivalent series resistance and charge transfer values calculated for FeV-WO3@g-C3N4 are 1.82 Ω and 0.65 Ω, respectively.

Ethane Ammoxidation over Sn/H-Zeolite Catalysts: Toward the Factors Contributing to the Yield of Acetonitrile

Different Sn/H-zeolite (β, MOR, SSZ-13, FER, and Y zeolite) catalysts are prepared with the improved impregnation method. The effects of reaction temperature and the composition of the reaction gas (ammonia, oxygen, and ethane) on the catalytic reaction are investigated. Adjusting the fraction of ammonia and/or ethane in the reaction gas can effectively strengthen the ethane dehydrogenation (ED) route and ethylamine dehydrogenation (EA) route and inhibit the ethylene peroxidation (EO) route, whereas the adjustment of oxygen cannot effectively promote acetonitrile formation because it cannot avoid enhancing the EO route. By comparing the acetonitrile yields on different Sn/H-zeolite catalysts at 600 °C, it is revealed that the ammonia pool effect, the residual Brönsted acid in the zeolite, and the Sn-Lewis acid synergistically catalyze ethane ammoxidation. Moreover, a higher L/B ratio of the Sn/H zeolite is beneficial to the improvement of acetonitrile yield. With a certain application potential, the Sn/H-FER-zeolite catalyst shows an ethane conversion of 35.2% and an acetonitrile yield of 22.9% at 600 °C; although a similar catalytic performance was observed on the best Co-zeolite catalyst in literature, the Sn/H-FER-zeolite catalyst is more selective to ethene and CO than the Co catalyst. In addition, the selectivity to CO₂ is less than 2% of that on the Sn-zeolite catalyst. This may be attributed to the special 2D topology and pore/channel system of the FER zeolite, which guarantee an ideal synergistic effect of the ammonia pool, the residual Brönsted acid in the zeolite, and the Sn-Lewis acid for the Sn/H-FER-catalyzed ethane ammoxidation reaction.

Practical Biocatalytic Synthesis of Aromatic Nitriles

Aromatic nitriles are important building blocks with wide applications in pharmaceutical and agrochemical industries as well as materials science. In a recent Chem Catalysis paper, Gröger and coworkers engineered aliphatic aldoxime dehydratases (Oxds) for the scalable synthesis of aromatic nitriles, delivering a sustainable and energy-efficient technology for the manufacturing of aromatic nitriles.

Critical Review of the Various Reaction Mechanisms for Glycerol Etherification

This review provides in-depth coverage of numerous mechanisms available for the etherification process of glycerol, including alcohol solvent, olefin solvent and solvent-free routes along with products that are formed at various stages of the reaction. Mono tert-butyl glycerol ether (MTBG), di tert-butyl glycerol ether (DTBG), and tri tert-butyl glycerol ether (TTBG) are the three general ether compounds obtained through tert-butyl alcohol (TBA) etherification. Glycerol etherification with n-butanol results in the formation of glycerol ether products that are linked to the substituted butyl groups. These products include two mono-butyl glycerol ethers, two di-butyl glycerol ethers and a tri-butyl glycerol ether. Two mono-benzyl glycerol ether isomers, two di-benzyl glycerol ether isomers and tri-benzyl glycerol ether are the most reported results when benzyl alcohol is used as a solvent in the etherification reaction. The etherification of glycerol with 1-butene involves a series of equilibrium reactions to produce mono-ethers, di-ethers, and tri-ethers, whereas the etherification of glycerol with isobutene is carried out via tert-butylation of glycerol, yielding similar glycerol ether products when TBA is used as a solvent. As the by-product may be easily removed, the solvent-free glycerol etherification approach may have several advantages over the other conventional methods. Therefore, further studies on base-catalyzed glycerol etherification that employs a solvent-free reaction route may reveal a method for improving the conversion, selectivity, and yield of reaction products. This review study is crucial in improving knowledge of numerous mechanisms and how they relate to the effectiveness of the product’s catalytic process.

Programing a cyanide-free transformation of aldehydes to nitriles and one-pot synthesis of amides through tandem chemo-enzymatic cascades

Nitriles are broadly applied to synthesize pharmaceuticals, agrochemicals, and materials because of their versatile transformation. Although various methods have been developed for introducing a nitrile group into organic molecules, most of them entail the use of highly toxic chemicals, transition metals, or harsh conditions. In this work, we reported a greener chemo-enzymatic cascade to synthesize alky and aryl nitriles from readily accessible aldehydes, that were further transformed into corresponding amides via an artificial enzyme cascade. A biphasic reaction system was designed to bridge chemical synthesis and enzymatic catalysis through simple phase separation. The biphasic system mainly perfectly avoided the inactivation of hydroxylamine on aldoxime dehydratase from Pseudomonas putida (OxdF1) and nitrile hydratase from Aurantimonas manganoxydans ATCC BAA-1229 (NHase1229). For the synthesis of various nitriles, moderate isolation yields of approximately 60% were obtained by the chemo-enzymatic cascade. Interestingly, two seemingly conflicting reactions of dehydration and hydration were sequentially proceeded to synthesize amides by the synergistic catalysis of OxdF1 and NHase1229 in E. coli cells. An isolation yield of approximately 62% was achieved for benzamide at the one-liter scale. In addition, the shuttle transport of substrates and products between two phases is convenient for the product separation and n-hexane recycling. Thus, the chemo-enzymatic cascade shows a potential application in the cyanide-free and large-scale synthesis of nitriles and amides.

A chemo-enzymatic cascade was developed for the cyanide-free synthesis of nitriles from aldehydes and further one-pot transformation into amides.

Vanadium-catalyzed Oxidative Conversion of Primary Aromatic Alcohols into Amides and Nitriles with Molecular Oxygen

Amides or nitriles are important building blocks because of the widespread occurrence in chemistry and biology. The development of green and efficient catalytic approaches to introduce nitrogen functionality is highly desired. Herein a vanadium-based material V-N-C-700 was prepared via a simple and convenient method, and employed for liquid-phase catalytic ammoxidation of alcohols with molecular oxygen. By using V-N-C-700/2-picolinic acid, primary aromatic alcohols was smoothly converted into the amides and nitriles in the presence of urea. The corresponding aldehydes are the key intermediates, and 2-picolinic acid could significantly enhance oxidation of alcohols into aldehydes. The amides were formed simultaneously along with nitriles, rather than only from nitriles via successive hydration. This work further expands non-noble metal catalysts for the preparation of amides and nitriles.

Lignin-Inspired Polymers with High Glass Transition Temperature and Solvent Resistance from 4-Hydroxybenzonitrile, Vanillonitrile, and Syringonitrile Methacrylates

We here report on the synthesis and polymerization of nitrile-containing methacrylate monomers, prepared via straightforward nitrilation of the corresponding lignin-inspired aldehyde. The polymethacrylates reached exceptionally high glass transition temperatures (T _g values), i.e., 150, 164, and 238 °C for the 4-hydroxybenzonitrile, vanillonitrile, and syringonitrile derivatives, respectively, and were thermally stable up to above 300 °C. Copolymerizations of the nitrile monomers with styrene and methyl methacrylate, respectively, gave potentially melt processable materials with tunable T _g values and enhanced solvent resistance. The use of lignin-derived nitrile-containing monomers represents an efficient strategy toward well-defined biobased high T _g polymer materials.

Cyanide-free synthesis of aromatic nitriles from aldoximes: Discovery and application of a novel heme-containing aldoxime dehydratase

Aromatic nitriles are important structural motifs that frequently existed in pharmaceutical drugs. Due to the convenient synthesis of aldoximes from aldehydes, the dehydration of aldoximes to corresponding nitriles by aldoxime dehydratases (Oxds) is considered as a safe and robust enzymatic production route. Although the Oxd genes are widely distributed in microbial kingdom, so far less than ten Oxds were expressed and further characterized. In this study, we found 26 predicted putative Oxd genes from the GenBank database using a genome mining strategy. The Oxd gene from Pseudomonas putida F1 was cloned and functionally expressed in Escherichia coli BL21 (DE3). The amino acid sequence of OxdF1 shows high identities of 33∼85 % to other characterized Oxds, and contained a ferrous heme as the catalytic site. The optimum reaction pH and temperature of recombinant OxdF1 were 7.0 and 35 °C, respectively. OxdF1 was stable in pH 7.0 potassium phosphate buffer at 30 °C, and its half-life was approximately 3.8 h. OxdF1 can efficiently dehydrate aromatic and heterocyclic aldoximes to nitriles, such as 2-bromobenzaldoxime, 2-chloro-6-fluorobenzaldoxime, thiophene-2-carboxaldoxime, and pyridine-3-aldoxime. Therefore, the recombinant OxdF1 shows a potential application in the cyanide-free synthesis of aromatic nitriles.

Efficient photocatalytic hydrogen peroxide generation coupled with selective benzylamine oxidation over defective ZrS3 nanobelts

Photocatalytic hydrogen peroxide (H₂O₂) generation represents a promising approach for artificial photosynthesis. However, the sluggish half-reaction of water oxidation significantly limits the efficiency of H₂O₂ generation. Here, a benzylamine oxidation with more favorable thermodynamics is employed as the half-reaction to couple with H₂O₂ generation in water by using defective zirconium trisulfide (ZrS₃) nanobelts as a photocatalyst. The ZrS₃ nanobelts with disulfide (S₂^2-) and sulfide anion (S^2-) vacancies exhibit an excellent photocatalytic performance for H₂O₂ generation and simultaneous oxidation of benzylamine to benzonitrile with a high selectivity of >99%. More importantly, the S₂^2- and S^2- vacancies can be separately introduced into ZrS₃ nanobelts in a controlled manner. The S₂^2- vacancies are further revealed to facilitate the separation of photogenerated charge carriers. The S^2- vacancies can significantly improve the electron conduction, hole extraction, and kinetics of benzylamine oxidation. As a result, the use of defective ZrS₃ nanobelts yields a high production rate of 78.1 ± 1.5 and 32.0 ± 1.2 μmol h^-1 for H₂O₂ and benzonitrile, respectively, under a simulated sunlight irradiation.

The ammoxidation of alcohols over heterogeneous catalysts for the green synthesis of nitriles

This is the first review on the ammoxidation of alcohols over heterogeneous catalysts, in which issues and potential solutions are demonstrated.

Multimetal Incorporation into 2D Conductive Metal-Organic Framework Nanowires Enabling Excellent Electrocatalytic Oxidation of Benzylamine to Benzonitrile

As an important organic intermediate, benzonitrile (BN) is widely involved in organic synthetic chemistry and pharmaceutical and dyestuff industries. However, the exploration of a more efficient and controllable synthesis technique and the corresponding greener catalysts for the synthesis of BN still poses a great challenge. Herein, with multimetallic two-dimensional conductive metal-organic frameworks (2D cMOF) as anodic electrocatalysts, we develop a green, convenient, and highly efficient electrochemical synthesis strategy for BN. Thanks to the intrinsic 2D electrically conductive structure and the optimized the multimetallic coupling catalytic effect, the resulting multimetallic 2D cMOFs exhibit excellent benzylamine (BA) electrooxidation performance. Especially, the trimetallic 2D cMOF (NiCoFe-CAT) requires an ultralow potential of 1.29 V vs reversible hydrogen electrode (RHE) to achieve a 10 mA·cm^-2 current density, which indicates the fastest reaction and the most favorable thermodynamic condition. A very high yield (0.058 mmol·mg^-1·h^-1) and faradic efficiency (∼87%) of benzonitrile are both achieved during the BA electrooxidation reaction at 1.45 V. The reaction mechanism investigations indicated that the various redox mediators of M^II/M^III (Ni, Co, Fe) may be regarded as multimetal active species to promote BA conversion. Also, the excellent cycling durability of multimetallic 2D cMOFs further promotes their potential practical applications. These electrocatalytic performances are considered excellent and nearly surpass all other reported Ni-based inorganics or MOF-based electrocatalysts for the electrocatalytic oxidation of benzylamine.

Oxidant free conversion of alcohols to nitriles over Ni-based catalysts

Ni-Based catalysts converting various primary alcohols to nitriles in high yields under oxidant-free, low temperature conditions.

Hydrothermal Synthesis of Urchin-like W-V-O Nanostructures with Excellent Catalytic Performance

Urchinlike W-V-O microspheres have been successfully synthesized for the first time by a one-pot hydrothermal approach. The as-synthesized W-V-O material was characterized by several techniques such as XRD, SEM, TEM, FTIR, EDS, BET, and Raman spectroscopy. The characterization results have revealed that the W-V-O microspheres consist of numerous one-dimensional nanobelts radially grown from the center. The typical nanobelts display rectangular cross sections with lengths of several micrometers, widths of about 50 nm, and thicknesses of approximately 10-20 nm. Vanadium oxides are dispersed highly either on the external surface or inside the channel surface of the hexagonal WO₃ structure. In addition, the as-obtained urchin-like W-V-O material was explored as a catalyst for the ammoxidation of 2,4- and 2,6-dichlorotoluene to the corresponding nitriles. The catalytic results have indicated that the W-V-O nanostructures show excellent performance with yields of 2,4- and 2,6-dichlorobenzonitrile respectively reaching up to 77.3 and 75.1%, which are the highest among the previously reported catalysts with two components. The formation process of the urchinlike W-V-O microspheres was simply investigated.

Mechanism of heterogeneous catalytic oxidation of organic compounds to carboxylic acids

The results of studies on the mechanism of heterogeneous catalytic oxidation of organic compounds of different chemical structure to carboxylic acids are analyzed and generalized. The concept developed by Academician G.K.Boreskov, according to which the direction of the reaction is governed by the structure and bond energy of surface intermediates, was confirmed taking the title processes as examples. Quantitative criteria of the bond energies of surface compounds of oxidizable reactants, reaction products and oxygen that determine the selective course of the reaction are presented.

The bibliography includes 195 references.