Exploitation of Surface-Sensitive Electrons in Scanning Electron Microscopy Reveals the Formation Mechanism of New Cubic and Truncated Octahedral CeO2 Nanoparticles

Direct Observation Techniques Using Scanning Electron Microscope for Hydrothermally Synthesized Nanocrystals and Nanoclusters

Metal oxide nanocrystals have garnered significant attention owing to their unique properties, including luminescence, ferroelectricity, and catalytic activity. Among the various synthetic methods, hydrothermal synthesis is a promising method for synthesizing metal oxide nanocrystals and nanoclusters. Because the shape and surface structure of the nanocrystals largely affect their properties, their analytical methods should be developed. Further, the arrangement of nanocrystals should be studied because the properties of nanoclusters largely depend on the arrangement of the primary nanocrystals. However, the analysis of nanocrystals and nanoclusters remains difficult because of their sizes. Conventionally, transmission electron microscopy (TEM) is widely used to study materials in nanoscale. However, TEM images are obtained as the projection of three-dimensional structures, and it is difficult to observe the surface structures and the arrangement of nanocrystals using TEM. On the other hand, scanning electron microscopy (SEM) relies on the signals from the surface of the samples. Therefore, SEM can visualize the surface structures of samples. Previously, the spatial resolution of SEM was not enough to observe nanoparticles and nanomaterials with sizes of between 10 and 50 nm. However, recent developments, including the low-landing electron-energy method, improved the spatial resolution of SEM, which allows us to observe fine details of the nanocluster surface directory. Additionally, improved detectors allow us to visualize the elemental mapping of materials even at low voltage with high solid angle. Further, the use of a liquid sample holder even enabled the observation of nanocrystals in water. In this paper, we discuss the development of SEM and related observation technologies through the observation of hydrothermally prepared nanocrystals and nanoclusters.

Investigation of the Image Contrast in an Ultra-Low Voltage Scanning Electron Microscope Using an Auger Electron Spectrometer

Surface-sensitive information on a bulk sample can be obtained by using a low incident electron energy (low accelerating voltage/landing voltage) in a scanning electron microscope (SEM). However, topography and composition contrast obtained at low incident electron energies may not be intuitive and should be analyzed carefully. By combining an Auger electron spectrometer (AES) with a low incident electron energy SEM (LE-SEM), we investigated the SEM contrast carefully by separating the secondary electron (SE) and back-scattered electron (BSE) components with high accuracy. For this, we modified an AES to measure the electron energy in the range of 0–0.6 keV with a sample bias voltage of 0 to −0.3 keV. We could clearly observe reversed brightness of gold and carbon (graphite) in BSE images when the energy of the incident electrons was reduced to 0.2–0.3 keV. In addition, reflected electron energy spectroscopy (REELS) is known to be a tool for chemical state analysis of the sample. We demonstrated that it is possible to study the electron states of graphite, diamond, and graphene by acquiring low incident energy REELS spectra from their surfaces with the newly modified AES. This will be a new method for analyzing the electron states of local areas of a surface.

Controlling the {111}/{110} Surface Ratio of Cuboidal Ceria Nanoparticles

The ability to control the size and morphology is crucial in optimizing nanoceria catalytic activity as this is governed by the atomistic arrangement of species and structural features at the surfaces. Here, we show that cuboidal cerium oxide nanoparticles can be obtained via microwave-assisted hydrothermal synthesis in highly alkaline media. High-resolution transmission electron microscopy (HRTEM) revealed that the cube edges were truncated by CeO₂{110} surfaces and the cube corners were truncated by CeO₂{111} surfaces. When adjusting synthesis conditions by increasing NaOH concentration, the average particle size increased. Although this was accompanied by an increase of the cube faces, CeO₂{100}, the cube edges, CeO₂{110}, and cube corners, CeO₂{111}, remained of constant size. Molecular dynamics (MD) was used to rationalize this behavior and revealed that energetically, the corners and edges cannot be atomically sharp, rather they are truncated by {111} and {110} surfaces, respectively, to stabilize the nanocube; both the experiment and simulation showed agreement regarding the minimum size of ∼1.6 nm associated with this truncation. Moreover, HRTEM and MD revealed {111}/{110} faceting of the {110} edges, which balances the surface energy associated with the exposed surfaces, which follows {111} > {110} > {100}, although only the {110} surface facets because of the ease of extracting oxygen from its surface and follows {111} > {100} > {110}. Finally, MD revealed that the {100} surfaces are "liquid-like" with a surface oxygen mobility 5 orders of magnitude higher than that on the {111} surfaces; this arises from the flexibility of the surface species network that can access many different surface arrangements because of very small energy differences. This finding has implications for understanding the surface chemistry of nanoceria and provides avenues to rationalize the design of catalytically active materials at the nanoscale.

Formation dynamics of mesocrystals composed of organically modified CeO2 nanoparticles: analogy to a particle formation model

Mesocrystals, non-classical crystalline nanostructured materials composed of aligned nanoparticles, present analogous behavior to ordinary particle formation.

Photodissociation of Cerium Oxide Nanocluster Cations

Cerium oxide cluster cations, CexOy(+), are produced via laser vaporization in a pulsed nozzle source and detected with time-of-flight mass spectrometry. The mass spectrum displays a strongly preferred oxide stoichiometry for each cluster with a specific number of metal atoms x, with x ≤ y. Specifically, the most prominent clusters correspond to the formula CeO(CeO2)n(+). The cluster cations are mass selected and photodissociated with a Nd:YAG laser at either 532 or 355 nm. The prominent clusters dissociate to produce smaller species also having a similar CeO(CeO2)n(+) formula, always with apparent leaving groups of (CeO2). The production of CeO(CeO2)n(+) from the dissociation of many cluster sizes establishes the relative stability of these clusters. Furthermore, the consistent loss of neutral CeO2 shows that the smallest neutral clusters adopt the same oxidation state (IV) as the most common form of bulk cerium oxide. Clusters with higher oxygen content than the CeO(CeO2)n(+) masses are present with much lower abundance. These species dissociate by the loss of O2, leaving surviving clusters with the CeO(CeO2)n(+) formula. Density functional theory calculations on these clusters suggest structures composed of stable CeO(CeO2)n(+) cores with excess oxygen bound to the surface as a superoxide unit (O2(-)).

Exposed surfaces on shape-controlled ceria nanoparticles revealed through AC-TEM and water-gas shift reactivity

Aberration-corrected transmission electron microscopy and high-angle annular dark field imaging was used to investigate the surface structures and internal defects of CeO2 nanoparticles (octahedra, rods, and cubes). Further, their catalytic reactivity in the water-gas shift (WGS) reaction and the exposed surface sites by using FTIR spectroscopy were tested. Rods and octahedra expose stable (111) surfaces whereas cubes have primarily (100) facets. Rods also had internal voids and surface steps. The exposed planes are consistent with observed reactivity patterns, and the normalized WGS reactivity of octahedra and rods were similar, but the cubes were more reactive. In situ FTIR spectroscopy showed that rods and octahedra exhibit similar spectra for -OH groups and that carbonates and formates formed upon exposure to CO whereas for cubes clear differences were observed. These results provide definitive information on the nature of the exposed surfaces in these CeO2 nanostructures and their influence on the WGS reactivity.