Synthesis of Different Ruthenium Nickel Bimetallic Nanostructures and an Investigation of the Structure-Activity Relationship for Benzene Hydrogenation to Cyclohexane

Cu-Doped Heterointerfaced Ru/RuSe2 Nanosheets with Optimized H and H2 O Adsorption Boost Hydrogen Evolution Catalysis

Ruthenium chalcogenide is a highly promising catalytic system as a Pt alternative for hydrogen evolution reaction (HER). However, well-studied ruthenium selenide (RuSe₂ ) still exhibits sluggish HER kinetics in alkaline media due to the inappropriate adsorption strength of H and H₂ O. Herein, xx report a new design of Cu-doped Ru/RuSe₂ heterogeneous nanosheets (NSs) with optimized H and H₂ O adsorption strength for highly efficient HER catalysis in alkaline media. Theoretical calculations reveal that the superior HER performance is attributed to a synergistic effect of the unique heterointerfaced structure and Cu doping, which not only optimizes the electronic structure with a suitable d-band center to suppress proton overbinding but also alleviates the energy barrier with enhanced H₂ O adsorption. As a result, Cu-doped heterogeneous Ru/RuSe₂ NSs exhibit a small overpotential of 23 mV at 10 mA cm^-2 , a low Tafel slope of 58.5 mV dec^-1 and a high turnover frequency (TOF) value of 0.88 s^-1 at 100 mV for HER in alkaline media, which is among the best catalysts in noble metal-based electrocatalysts toward HER. The present Cu-doped Ru/RuSe₂ NSs interface catalyst is very stable for HER by showing no activity decay after 5000-cycle potential sweeps. This work heralds that heterogeneous interface modulation opens up a new strategy for the designing of more efficient electrocatalysts.

Ultrasound-assisted green synthesis of Ru supported on LDH-CNT composites as an efficient catalyst for N-ethylcarbazole hydrogenation

N-ethylcarbazole/dodecahydro-N-ethylcarbazole (NEC/12H-NEC) is one of the most attractive LOHCs, and it is of great significance to develop catalysts with high activity and reduce the hydrogen storage temperature. Layered double hydroxides-carbon nanotubes composites (LDH-CNT) were synthesized by a simple in-situ assembly method. Due to the introduction of CNT, a strong interaction occurred between LDH and CNT, which effectively improved the electron transfer ability of LDH-CNT. Ru/LDH-CNT catalysts were prepared via ultrasound-assisted reduction method without adding reducing agents and stabilizers. Under the cavitation effect of ultrasound, the hydroxyl groups on the surface of LDH were excited to generate hydrogen radicals (•H) with high reducibility, which successfully reduced Ru3+ to Ru NPs. Ru/LDH-3.9CNT-(300-1) catalyst was of 1.63 nm average Ru particle size with CNT amount of 3.9 wt% and the ultrasonic power of 300 W at 1 h, and its electron transfer resistance was less than that of Ru/LDH-(300-1). The synergy of ultrafine Ru NPs and fast electron transfer made it exhibit exceptional catalytic performance in NEC hydrogenation. Even if the reaction temperature was lowered to 80 °C, its hydrogenation performance was better than that of commercial Ru/Al2O3 catalyst at 120 °C. The ultrasound-assisted method is efficient, green and environmentally friendly, and the operation process is simple and economical. It is expected to be used in practical industrial production, which provides a reference for the preparation of high-activity and low-temperature hydrogen storage catalysts.

Synthesis of Trimetallic (Ni-Cu)@Ag Core@Shell Nanoparticles without Stabilizing Materials for Antibacterial Applications

We report a simple method to prepare colloidal trimetallic (Ni-Cu)@Ag core@shell nanoparticles (NPs) without stabilizing materials. Experimental evidence was found for the successful synthesis of these NPs using X-ray diffraction (XRD), optical spectroscopy, and high-resolution transmission electron microscopy (HRTEM). The presence of core metals (Ni and Cu) was confirmed by elemental analysis using a total reflection X-ray fluorescence (TXRF) analysis. In addition, the absorption spectra of the prepared samples exhibited broad bands compared to the bands of the monometallic NPs, indicating the formation of a core-shell nanostructure. The antibacterial activity of the trimetallic NPs was evaluated against three Gram-negative (Pseudomonas aeruginosa, Escherichia coli, and Salmonella) and two Gram-positive (Streptococcus and Staphylococcus aureus) bacteria on Mueller-Hinton agar. These NPs showed high inhibition of bacterial growth at the low sample concentrations used in this study compared to other nanomaterials. One of the interesting results of the current study is that the inhibition zone of Pseudomonas aeruginosa as a resistant bacterium was high for most NPs. These results make the prepared samples promising candidates for antibiotic material applications.

Efficient Catalytic Conversion of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid over Ruthenium Cluster-Embedded Ni(OH)2 Catalyst

5-Hydroxymethylfurfural (HMF) can be oxidized to 2,5-furandicarboxylic acid (FDCA) for the production of biorenewable plastics to replace fossil resourced polyethylene terephthalate (PET). Development of a highly efficient electrocatalyst using renewable electricity as energy input is highly desired. In this work, Ru cluster-embedded Ni(OH)₂ nanosheets [Ru/Ni(OH)₂ ] were synthesized and exploited as electrochemical catalysts for the conversion of HMF to FDCA. Ru/Ni(OH)₂ exhibited significantly improved current density (40 mA cm^-2 at 1.41 V vs. reversible hydrogen electrode) of over 7.7 times in comparison with Ni(OH)₂ , and nearly 100 % conversion degree for HMF and 98.5 % selectivity towards FDCA were obtained. Operando Raman experiments revealed the catalysis was facilitated by the interconversion between Ni³⁺ and Ni²⁺ . Density functional theory calculations further revealed the effect of Ru clusters of Ni(OH)₂ , thereby promoting HMF adsorption capacity on Ni sites to boost HMF oxidation activity. This work provides a novel strategy using Ru clusters to modify earth abundant Ni based catalyst for HMF oxidation to obtain high-value biomass-derived products.

Ultrasonic-assisted synthesis of highly stable RuPd bimetallic catalysts supported on MgAl-layered double hydroxide for N-ethylcarbazole hydrogenation

N-Ethylcarbazole (NEC), as a promising liquid organic hydrogen carrier (LOHC), can store and release hydrogen through a reversible catalytic hydrogenation and dehydrogenation reaction. In this paper, RuPd bimetallic nanocatalyst supported on MgAl-layered double hydroxide (RuPd/LDH) was prepared by ultrasonic-assisted reduction method, and its catalytic performance in NEC hydrogenation was also studied. Under the action of ultrasound, hydroxyl groups (-OH) on the surface of LDH support dissociated into highly reductive hydrogen radicals for the reduction of Ru³⁺ and Pd²⁺ to Ru⁰ and Pd⁰. For the 4Ru1Pd/LDH-(300-1) catalyst prepared under ultrasonic conditions of 25 kHz, 300 W, and 1 h, the average size of the metal nanoparticles was only 1.23 nm, which indicated that Ru, Pd, and RuPd NPs were highly dispersed on the support. The strong electronic effects between Ru and Pd improved its catalytic performance in NEC hydrogenation. With m_(Ru+Pd)/m_(NEC) = 0.2wt%, pressure of 6 MPa, and temperature of 120 °C, the selectivity of dodecahydro-N-ethylcarbazole (12H-NEC) was 98.07%, and the capacity and percentage of hydrogen storage were 5.75wt% and 99.3%, respectively. After the catalyst was recycled 8 times, the percentage of hydrogen storage still reached 98.9%, showing higher stability. The preparation method is simple and environmentally friendly, providing an idea for the preparation of ultrafine bimetallic catalysts with high catalytic activity and stability.

Rational Design of Pt-Pd-Ni Trimetallic Nanocatalysts for Room-Temperature Benzaldehyde and Styrene Hydrogenation

Nanostructures of the multimetallic catalysts offer great scope for fine tuning of heterogeneous catalysis, but clear understanding of the surface chemistry and structures is important to enhance their selectivity and efficiency. Focussing on a typical Pt-Pd-Ni trimetallic system, we comparatively examined the Ni/C, Pt/Ni/C, Pd/Ni/C and Pt-Pd/Ni/C catalysts synthesized by impregnation and galvanic replacement reaction. To clarify surface chemical/structural effect, the Pt-Pd/Ni/C catalyst was thermally treated at X=200, 400 or 600 °C in a H₂ reducing atmosphere, respectively termed as Pt-Pd/Ni/C-X. The as-prepared catalysts were characterized complementarily by XRD, XPS, TEM, HRTEM, HS-LEIS and STEM-EDS elemental mapping and line-scanning. All the catalysts were comparatively evaluated for benzaldehyde and styrene hydrogenation. It is shown that the "PtPd alloy nanoclusters on Ni nanoparticles" (PtPd/Ni) and the synergistic effect of the trimetallic Pt-Pd-Ni, lead to much improved catalytic performance, compared with the mono- or bi- metallic counterparts. However, with the increase of the treatment temperature of the Pt-Pd/Ni/C, the catalytic performance was gradually degraded, which was likely due to that the favourable nanostructure of fine "PtPd/Ni" was gradually transformed to relatively large "PtPdNi alloy on Ni" (PtPdNi/Ni) particles, thus decreasing the number of noble metal (Pt and Pd) active sites on the surface of the catalyst. The optimum trimetallic structure is thus the as synthesised Pt-Pd/Ni/C. This work provides a novel strategy for the design and development of highly efficient and low-cost multimetallic catalysts, e. g. for hydrogenation reactions.

Structural Isomerism of Two Ce-BTC for Fabricating Pt/CeO2 Nanorods toward Low-Temperature CO Oxidation

Metal-organic frameworks (MOFs) have attracted enormous research interest as precursors/templates to prepare catalytic materials. However, the effect of structural isomerism of MOFs on the catalytic performance has rarely been studied. In this contribution, two topologically different Ce-benzene tricarboxylate (Ce-BTC) based on the same ligands and metal centers (viz., "MOF isomers") are prepared and used as porous supports to load Pt nanoparticles (NPs), which shows distinct differences in porosities and loading behaviors of Pt. Strikingly, an irreversible framework transformation from tetragonal Ce-BTC to monoclinic isomer is observed during water soaking treatment. The results give clear evidence that Pt/CeO₂ derived from tetragonal Ce-BTC inclines to produce more Pt⁰ and smaller Pt NPs, which eventually improve the catalytic performance for CO oxidation (T₁₀₀ = 80 °C). In situ diffuse reflectance infrared Fourier transform spectroscopy analyses demonstrate that the adsorbed CO-Pt⁰ is the dominant intermediate for CO oxidation, rather than CO-Pt^{σ +} at the low temperature. Furthermore, MOF isomers based on the same structural units are also found in other Ln-MOFs, such as Er-BTC, Eu-BTC, Y-BTC, and Ce/Y-BTC. Overall, this study affords a fundamental understanding of the effect of MOF structural isomers on the catalytic performance of the derived composites.

Effect of the thermal treatment temperature of RuNi bimetallic nanocatalysts on their catalytic performance for benzene hydrogenation

The thermal treatment temperature of bimetallic nanocatalysts plays an important role in determining their catalytic performance.

Ultrafine Nanoparticle-Supported Ru Nanoclusters with Ultrahigh Catalytic Activity

The design of an ideal heterogeneous catalyst for hydrogenation reaction is to impart the catalyst with synergetic surface sites active cooperatively toward different reaction species. Herein a new strategy is presented for the creation of such a catalyst with dual active sites by decorating metal and metal oxide nanoparticles with ultrafine nanoclusters at atomic level. This strategy is exemplified by the design and synthesis of Ru nanoclusters supported on Ni/NiO nanoparticles. This Ru-nanocluster/Ni/NiO-nanoparticle catalyst is shown to exhibit ultrahigh catalytic activity for benzene hydrogenation reaction, which is 55 times higher than Ru-Ni alloy or Ru on Ni catalysts. The nanoclusters-on-nanoparticles are characterized by high-resolution transmission electron microscope, Cs-corrected high angle annular dark field-scanning transmission electron microscopy, elemental mapping, high-sensitivity low-energy ion scattering, and X-ray absorption spectra. The atomic-scale nanocluster-nanoparticle structural characteristics constitute the basis for creating the catalytic synergy of the surface sites, where Ru provides hydrogen adsorption and dissociation site, Ni acts as a "bridge" for transferring H species to benzene adsorbed and activated at NiO site, which has significant implications to multifunctional nanocatalysts design for wide ranges of catalytic reactions.