Thermally Induced Strains on the Catalytic Activity and Stability of Pt-M2O3/C (M=Y or Gd) Catalysts towards Oxygen Reduction Reaction

Intermetallic Pd-Y nanoparticles/N-doped carbon nanotubes as multi-active catalysts for oxygen reduction reaction, ethanol oxidation reaction, and zinc-air batteries

Intermetallic nanomaterials are unique in terms of their band gap, atomic-level arrangement, and well-defined stoichiometry, which allows them to exhibit significantly enhanced catalytic performance in electrochemical applications. However, the preparation of durable intermetallic catalysts with a lower content of platinum group metals is challenging, while the lack of control over the loss of active components limits their long-term application due to weak interaction between the support and the nanostructure. Here, we have designed the intermetallic alloyed nanoparticles (NPs) of PdY on N-doped carbon nanotubes (PdY/NCNTs) as a multifunctional catalyst for the oxygen reduction reaction (ORR), the ethanol oxidation reaction (EOR), and zinc-air batteries (ZABs). The strong adhesion through nitrogen ensures the anchoring of alloyed PdY NPs on the NCNTs, which restrains atomic migration and sintering during their conversion to intermetallic phases. This study confirms that there is negligible active site leaching owing to the strong and multiple dative bonds between the NCNTs and PdY NPs. Therefore, this catalyst exhibits remarkable catalytic activity, resulting in a mass activity of 1317 and 2902 mA mgPd-1 at jk and jf for the ORR and the EOR, respectively, and remains stable for a longer period. In addition, the PdY/NCNT-containing air cathode-fabricated ZAB achieved a higher power density (0.236 W cm-2) compared to the benchmark Pt/C.

Rare-earth metal-N6 centers in porous carbon for electrocatalytic CO2 reduction

Single-atom catalysts fabricated using rare earth elements have emerged for electrocatalytic carbon dioxide reduction, but they need to be studied systematically and intensively. Herein, density functional theory was employed to determine the electrocatalytic CO₂ reduction activity of rare earth-N₆ porous carbon (Re = Ce, Nd, Sm, Eu, Gd, Tb, Er, Tm, Yb, and Lu) single-atom catalysts. The results revealed that the binding energy of the rare-earth atoms to the N₆C monolayers in the ten studied Re-N₆C monatomic catalysts is much more negative than the cohesion energy of the bulk rare-earth metal, which makes rare-earth atoms stably dispersed in the N₆C skeleton. CO is the primary chemical product of electrocatalytic CO₂ reduction by Ce, Eu, and Lu. The primary product of the six monatomic species, i.e., Nd, Sm, Tb, Er, Tm, and Yb, is HCOOH. The dominant product of Gd is CH₄. The limiting potentials of these catalysts are in the range of 0.31-0.786 V and their overpotentials are in the range of 0.06-0.707 V, all of which are relatively low, showing that they are potential and promising electrocatalysts for CO₂ reduction. Subsequently, Eu-N₆C was experimentally synthesized and used for electrocatalytic CO₂ reduction to obtain CO products, and the overpotential showed good agreement with the theoretically calculated values.

Rare earth Y doping induced lattice strain of mesoporous PtPd nanospheres for alkaline oxygen reduction electrocatalysis

The synthesis of catalysts with controllable morphology and composition is important to enhance the catalytic performance for oxygen reduction reaction (ORR). Herein, trimetallic PtPdY mesoporous nanospheres (PtPdY MNs) are produced via a one-step chemical reduction method applying F127 as soft temple under acidic condition. The mesoporous structure provides a large contact area and also stimulates the diffusion and mass transfer of reactants and products. Besides, synergistic effect among Pt, Pd and Y elements effectively alters their electronic structure, enhancing the catalytic activity. Therefore, the PtPdY MNs show excellent ORR permanence to Pt/C under the alkaline solution. This study offers an effective channel for the preparation of mesoporous metals with rare earth metal doping towards promising electrocatalytic applications.

Deposition of Pt Nanoparticles by Ascorbic Acid on Composite Electrospun Polyacrylonitrile-Based Carbon Nanofiber for HT-PEM Fuel Cell Cathodes

The efficient use of renewable energy sources requires development of new electrocatalytic materials for electrochemical energy storage systems, particularly fuel cells. To increase durability of high temperature polymer electrolyte fuel cell (HT-PEMFC), Pt/carbon black based catalysts should be replaced by more durable ones, for example Pt/carbon nanofibers (CNF). Here, we report for the first time the quantitative ascorbic acid assisted deposition of Pt onto electrospun polyacrylonitrile-based CNF composite materials. The effect of their subsequent post-treatment at various temperatures (250 and 500 °C) and media (vacuum or argon-hydrogen mixture) on the Pt/C catalyst morphology is investigated. All obtained samples are thoroughly studied by high resolution electron microscopy, and Pt electrochemically active specific surface area was evaluated by cyclic voltammetry.

Revealing the Nature of Active Sites on Pt-Gd and Pt-Pr Alloys during the Oxygen Reduction Reaction

For large-scale applications of hydrogen fuel cells, the sluggish kinetics of the oxygen reduction reaction (ORR) have to be overcome. So far, only platinum (Pt)-group catalysts have shown adequate performance and stability. A well-known approach to increase the efficiency and decrease the Pt loading is to alloy Pt with other metals. Still, for catalyst optimization, the nature of the active sites is crucial. In this work, electrochemical scanning tunneling microscopy (EC-STM) is used to probe the ORR active areas on Pt₅Gd and Pt₅Pr in acidic media under reaction conditions. The technique detects localized fluctuations in the EC-STM signal, which indicates differences in the local activity. The in situ experiments, supported by coordination-activity plots based on density functional theory calculations, show that the compressed Pt-lanthanide (111) terraces contribute the most to the overall activity. Sites with higher coordination, as found at the bottom of step edges or concavities, remain relatively inactive. Sites of lower coordination, as found near the top of step edges, show higher activity, presumably due to an interplay of strain and steric hindrance effects. These findings should be vital in designing nanostructured Pt-lanthanide electrocatalysts.

New Carbon Nanofiber Composite Materials Containing Lanthanides and Transition Metals Based on Electrospun Polyacrylonitrile for High Temperature Polymer Electrolyte Membrane Fuel Cell Cathodes

Electrospinning of polyacrylonitrile/DMF dopes containing salts of nickel, cobalt, zirconium, cerium, gadolinium, and samarium, makes it possible to obtain precursor nanofiber mats which can be subsequently converted into carbon nanofiber (CNF) composites by pyrolysis at 1000-1200 °C. Inorganic additives were found to be uniformly distributed in CNFs. Metal states were investigated by transmission electron microscopy and X-ray photoelectron spectroscopy (XPS). According to XPS in CNF/Zr/Ni/Gd composites pyrolyzed at 1000 °C, nickel exists as Ni0 and as Ni2+, gadolinium as Gd3+, and zirconium as Zr4+. If CNF/Zr/Ni/Gd is pyrolyzed at 1200 °C, nickel exists only as Ni0. For CNF/Sm/Co composite, samarium is in Sm3+ form when cobalt is not found on a surface. For CNF/Zr/Ni/Ce composite, cerium exists both as Ce4+ and as Ce3+. Composite CNF mats were platinized and tested as cathodes in high-temperature polymer electrolyte membrane fuel cell (HT-PEMFC). Such approach allows to introduce Pt-M and Pt-MOx into CNF, which are more durable compared to carbon black under HT-PEMFC operation. For CNF/Zr/Ni/Gd composite cathode, higher performance in the HT-PEMFC at I >1.2 A cm-2 is achieved due to elimination of mass transfer losses in gas-diffusion electrode compared to commercial Celtec®P1000.

Rare Earth Single-Atom Catalysts for Nitrogen and Carbon Dioxide Reduction

Single-atom catalysts (SACs) have attracted much attention owning to their high catalytic properties. Herein, yttrium and scandium rare earth SACs are successfully synthesized on a carbon support (Y₁/NC and Sc₁/NC). Different from the well-known M-N₄ structure of M-N-C (M = Fe, Co) catalysts, Sc and Y atoms with a large atomic radius tend to be anchored to the large-sized carbon defects through six coordination bonds of nitrogen and carbon. Although Y- and Sc-based nanomaterials are generally inactive to room-temperature electrochemical reactions, Y₁/NC and Sc₁/NC SACs exhibit catalytic activities to nitrogen reduction reaction and carbon dioxide reduction reaction due to the modulation of the local electronic structure of Y/Sc single atoms by N and C coordination. The catalytic functions of rare earth single atoms not only demonstrate the magical effect of SACs but also promote the application of rare earth catalysts in room-temperature electrochemical reactions.

A novel electrochemiluminescence biosensor based on S-doped yttrium oxide ultrathin nanosheets for the detection of anti-Dig antibodies

The mechanism of a novel electrochemiluminescence biosensor based on S-doped yttrium oxide ultrathin nanosheets for detection of anti-Dig antibodies.

Electrocatalytic Cobalt Nanoparticles Interacting with Nitrogen-Doped Carbon Nanotube in Situ Generated from a Metal-Organic Framework for the Oxygen Reduction Reaction

A metal organic framework (MOF), synthesized from cobalt salt, melamine (mela), and 1,4-dicarboxybezene (BDC), was used as precursor to prepare Co/CoN_x/N-CNT/C electrocatalyst via heat treatment at different temperature (700-900 °C) under nitrogen atmosphere. Crystallites size and microstrain in the 800 °C heat-treated sample (MOFs-800) were the lowest, whereas the stacking fault value was the highest among the rest of the homemade samples, as attested to by the Williamson-Hall analysis, hence assessing that the structural or/and surface modification of Co nanoparticles (NPs), found in MOFs-800, was different from that in other samples. CNTs in MOFs-800, interacting with Co NPs, were formed on the surface of the support, keeping the hexagonal shape of the initial MOF. Among the three homemade samples, the MOF-800 sample, with the best electrocatalytic performance toward oxygen reduction reaction (ORR) in 0.1 M KOH solution, showed the highest density of CNTs skin on the support, the lowest I_D/I_G ratio, and the largest N atomic content in form of pyridinic-N, CoN_x, pyrrolic-N, graphitic-N, and oxidized-N species. Based on the binding energy shift toward lower energies, a strong interaction between the active site and the support was identified for MOFs-800 sample. The number of electron transfer was 3.8 on MOFs-800, close to the value of 4.0 determined on the Pt/C benchmark, thus implying a fast and efficient multielectron reduction of molecular oxygen on CoN_x active sites. In addition, the chronoamperometric response within 24 000 s showed a more stable current density at 0.69 V/RHE on MOFs-800 as compared with that of Pt/C.