Microenvironment engineering of supported metal nanoparticles for chemoselective hydrogenation

Selective hydrogenation with supported metal catalysts widely used in the production of fine chemicals and pharmaceuticals often faces a trade-off between activity and selectivity, mainly due to the inability to adjust one factor of the active sites without affecting other factors. In order to solve this bottleneck problem, the modulation of the microenvironment of active sites has attracted more and more attention, inspired by the collaborative catalytic mode of enzymes. In this perspective, we aim to summarize recent advances in the regulation of the microenvironment surrounding supported metal nanoparticles (NPs) using porous materials enriched with organic functional groups. Insights on how the microenvironment induces the enrichment, oriented adsorption and activation of substrates through non-covalent interaction and thus determines the hydrogenation activity and selectivity will be particularly discussed. Finally, a brief summary will be provided, and challenges together with a perspective in microenvironment engineering will be proposed.

Semi-hydrogenation of α,β-unsaturated aldehydes over sandwich-structured nanocatalysts prepared by phase transformation of thin-film Al2O3 to Al-TCPP

The semi-hydrogenation of α,β-unsaturated aldehydes to the desired unsaturated alcohols with both high conversion and high selectivity remains a big challenge. Herein, we designed a sandwich-structured nanocatalyst for the highly selective hydrogenation of various α,β-unsaturated aldehydes (e.g., cinnamaldehyde, furfural, crotonaldehyde, and 3-methyl-2-butenal) to the targeted unsaturated alcohols. Highly accessible platinum nanoparticles were sandwiched between a metal-organic framework (MOF) core (i.e., MIL-88B(Fe)) and a MOF shell (i.e., Al-TCPP). In particular, the growth of the Al-TCPP shell was achieved by atomic layer deposition (ALD) of thin-film Al₂O₃ followed by phase transformation with a tetrakis(4-carboxyphenyl)porphyrin (H₄TCPP) linker. The thickness of the Al-TCPP shell can be finely controlled by adjusting the cycle number of alumina ALD and the concentration of the H₄TCPP linker during the phase transformation of Al₂O₃ to Al-TCPP. It was proven that the permeable MOF shells could serve as selectivity regulators for the activation of the CO bonds in α,β-unsaturated aldehydes (in preference to the CC bonds), leading to higher selectivity towards unsaturated alcohols as compared to the conventional surface supported Pt catalysts. Mechanistic insights showed that the enhanced catalytic performance was attributed to (i) the modified electronic state of sandwiched Pt nanoparticles by the two MOF layers and (ii) the steric hindrance effect on substrate diffusion through the sandwich-structured catalysts.

Inert metal induces the modulation of unsaturated aldehyde absorption mode for enhanced selective hydrogenation

Selective hydrogenation of α,β-unsaturated aldehydes to obtain a high yield of unsaturated alcohols is important in industrial production. This is still a great challenge because it is thermally more favorable for the hydrogenation of CC than for the CO bond. Various strategies have been developed to optimize the catalysts for improving selectivity but are usually accompanied by the sacrifice of catalytic activity. Herein, we adopt the inert metal inducement strategy to synthesize a series of Ir-M alloy nanoparticle catalysts. The optimal catalyst IrCd₅ exhibits impressive catalytic performance in the selective hydrogenation of cinnamaldehyde, achieving 96.7% conversion with 94.3% selectivity for cinnamal alcohol, which is far superior to that of the Ir counterpart. Furthermore, the H₂ temperature-programmed desorption (H₂-TPD) test, styrene-TPD test, surface valence band test and density functional theory calculations demonstrate that the adsorption mode of cinnamaldehyde shifted from parallel to vertical configurations after introducing an inert metal. Compared to Ir, the weaker adsorption of alkene and stronger adsorption of the substrate for IrCd₅ lead to the prior adsorption and hydrogenation of the CO bond, thus elevating the selectivity of the cinnamal alcohol. This strategy disperses precious metal nanoparticles effectively, maximizes atomic utilization, and improves the selectivity, which provides a new avenue to design bimetal alloy catalysts for the selective hydrogenation of α,β-unsaturated aldehydes.

Improving selective hydrogenation of carbonyls bond in α, β-unsaturated aldehydes over Pt nanoparticles encaged within the amines-functionalized MIL-101-NH2

The high selectivity in the hydrogenation reactions of α, β-unsaturated aldehydes is always a demanding task. Precious Pt-based catalysts play a pivotal role in selective catalytic hydrogenation of α, β-unsaturated aldehydes, but controlling the selectivity is still a great challenge. Herein, the Pt nanoparticles were encaged within the mesopores of amines (-NH₂) functionalized MOFs via polyol reduction method as an efficient approach to enhance the selectivity of desired carbonyls bond reduction. The as-prepared 3-Pt/MOF-NH₂(x) catalysts retained the inherent properties of MOF-NH₂(x) supports such as crystallinity, surface area, pore texture, and surface acidity. Remarkably, the amines modified MOFs supported Pt-based catalysts (3-Pt/MOF-NH2(x)) improved the selective hydrogenation of carbonyls (CO) bond in cinnamaldehyde (CAL) and Furfural (FFL) with a higher selectivity (≥80 %) under mild conditions as compared to other reported catalysts. The improved catalytic performance for the selective hydrogenation of carbonyls (CO) bond is credited to the nitrogen (N) heteroatom of the amines group existing in the skeleton of MOFs and somewhat to the steric effect induced by mesopores of MOFs. The N heteroatom not only helps in the high uniform dispersion and stabilization of small-sized Pt nanoparticles (≈2nm) but also adjust the electron movement (electronic density) via synergistic effect resulting from the N to the vacant d-orbital of active Pt nanoparticles confined within MOFs, leading to more new interfacial electrophilic and nucleophilic sites, which are beneficial for selective hydrogenation of CO bond. Besides, the steric effect induced by mesopores of MOFs, encaging Pt nanoparticles, can also enhance the selective adsorption of the CO bond to interact with the catalyst active sites, resulting in higher selective hydrogenation of CO bond.

Superficial chiral etching on achiral metal-organic framework for HPLC enantioseparations

Chiral metal-organic frameworks have shown great potential in enantioselective separation and asymmetric catalysis due to their diverse and adjustable structures with abundant chiral recognition sites. Herein, a new chiral postsynthetic modification was used for preparing an achiral@chiral metal-organic frameworks core-shell composite [Cu₃ (Btc)₂ ]@[Cu₂ ((+)-Cam)₂ Dabco] by a superficial chiral etching method. The [Cu₃ (Btc)₂ ]@[Cu₂ ((+)-Cam)₂ Dabco] composite was utilized as a novel chiral stationary phase for HPLC enantioseparation. Various racemates were separated on the [Cu₃ (Btc)₂ ]@[Cu₂ ((+)-Cam)₂ Dabco]-packed column (column A). It exhibited good chiral resolving ability toward many different kinds of racemates, especially chiral drugs. Among them, the highest resolution value for 1,2-diphenyl-1,2-ethanediol reach 2.70. The relative standard deviations of retention time and peak area for repeated separation of 1,2-diphenyl-1,2-ethanol were 0.45 % and 0.81 %, respectively. Compared with the resolution ability of [Cu₂ ((+)-Cam)₂ Dabco]-packed column (column B), the column A shows higher column efficiency and better separation performance than those of column B. The results indicated that the [Cu₃ (Btc)₂ ]@[Cu₂ ((+)-Cam)₂ Dabco] as stationary phase can greatly improve the column efficiency and chiral resolution ability of chiral metal-organic frameworks, which demonstrated that the superficial chiral etching as an economic and efficient strategy opens up a new way for the application of metal-organic frameworks. This article is protected by copyright. All rights reserved.

Highly stable Pt-Co bimetallic catalysts prepared by atomic layer deposition for selective hydrogenation of cinnamaldehyde

Pt-Co bimetallic catalysts were deposited onγ-Al₂O₃nanoparticles by atomic layer deposition (ALD) and were used for selective hydrogenation of cinnamaldehyde (CAL) to cinnamyl alcohol (COL). High resolution transmission electron microscopy, hydrogen temperature-programmed reduction, x-ray diffraction, and x-ray photoelectron spectroscopy were used to identify the strong interaction between Pt and Co. The obtained catalysts with an optimal Pt/Co ratio achieved a COL selectivity of 81.2% with a CAL conversion of 95.2% under mild conditions (i.e., 10 bar H₂and 80 °C). During the CAL hydrogenation, the addition of Co on Pt significantly improved the activity and selectivity due to the synergetic effects of Pt-Co bimetallic catalysts, resulted from the transfer of electrons from Co to Pt, which can stabilize the carbonyl groups. The obtained Pt-Co bimetallic catalysts also showed excellent stability due to the strong interaction between the metal nanoparticles and the alumina support. Negligible losses in the activity and selectivity were observed during the recycling experiments, showing the potential for practical applications.

Metal organic frameworks for electrochemical sensor applications: A review

Metal-organic frameworks (MOFs) are broadly known as porous coordination polymers, synthesized by metal-based nodes and organic linkers. MOFs are used in various fields like catalysis, energy storage, sensors, drug delivery etc., due to their versatile properties (tailorable pore size, high surface area, and exposed active sites). This review presents a detailed discussion of MOFs as an electrochemical sensor and their enhancement in the selectivity and sensitivity of the sensor. These sensors are used for the detection of heavy metal ions like Cd²⁺, Pb²⁺, Hg²⁺, and Cu²⁺ from groundwater. Various types of organic pollutants are also detected from the water bodies using MOFs. Furthermore, electrochemical sensing of antibiotics, phenolic compounds, and pesticides has been explored. In addition to this, there is also a detailed discussion of metal nano-particles and metal-oxide based composites which can sense various compounds like glucose, amino acids, uric acid etc. The review will be helpful for young researchers, and an inspiration to future research as challenges and future opportunities of MOF-based electrochemical sensors are also reported.

The structure and electronic effects of ZIF-8 and ZIF-67 supported Pt catalysts for crotonaldehyde selective hydrogenation

The structure and electronic effects of ZIF-8 and ZIF-67 supported Pt catalysts for crotonaldehyde selective hydrogenation.

Platinum and cobalt intermetallic nanoparticles confined within MIL-101(Cr) for enhanced selective hydrogenation of the carbonyl bond in α,β-unsaturated aldehydes: synergistic effects of electronically modified Pt sites and Lewis acid sites

PtCo/MIL-101(Cr) with high uniform dispersion Pt–Co IMNs synthesized by a polyol reduction method show higher activity for selective catalytic hydrogenation of α,β-unsaturated aldehydes due to the synergistic effect of PtCo and MIL-101(Cr) support.

The in situ fabrication of ZIF-67 on titania-coated magnetic nanoparticles: a new platform for the immobilization of Pd(ii) with enhanced catalytic activity for organic transformations

The synthesis of a magnetic zeolitic-imidazolate-framework-67-supported Pd catalyst was demonstrated, and its catalytic activity for oxidation, reduction, and the oxidative deprotection of oximes was studied.

Core-Shell MOFs@MOFs: Diverse Designability and Enhanced Selectivity

Metal-Organic frameworks (MOFs), especially MOF-based composites, performed an irreplaceable role in the material fields. By virtue of the tailorability of MOFs, core-shell MOFs@MOFs composites with diverse designability and enhanced selectivity have inspired infinite scientific interest. This review will highlight an up-to-date overview of the designability and enhanced selectivity of core-shell MOFs@MOFs composites, covering the synthetic strategies of an epitaxial growth method, postsynthetic modification, and one-pot synthesis as well as the synergistic selective performance of the synthesized MOFs@MOFs in catalysis, adsorption and separation, and molecular recognition. Finally, the potential development trend and challenges toward core-shell MOFs@MOFs are addressed.

Exploring the Fundamental Roles of Functionalized Ligands in Platinum@Metal-Organic Framework Catalysts

The metal nodes, functionalized ligands, and uniform channels of metal-organic frameworks (MOFs) are typically utilized to regulate the catalytic properties of metal nanoparticles (MNPs). However, though the ligand functionalization could impact the properties of the metal nodes and channels, which might further regulate the catalytic activity and selectivity of MNPs, related research in the design of MNP/MOF catalysts was usually neglected. Herein, we synthesized a series of Pt@UiO-66 composites (Pt@UiO-66-NH₂, Pt@UiO-66-SO₃H, and Pt@UiO-66) with slightly different organic ligands, which enhanced steric hindrance and contributed to multipathway electron transfer in selective hydrogenation of linear citronellal. The selectivity toward citronellol was gradually improved along with the increased size of functional groups (hydrogen, amino groups, and sulfo groups) on organic ligands, which enhanced steric hindrance provided by channels. In addition, the X-ray photoelectron spectroscopy measurements also revealed that the electronic state of Pt NPs was regulated through multipathway electron transfer from Pt NPs to metal nodes, between organic ligands and Pt NPs/metal nodes. Our research proved that the ligand functionalization altered physiochemical properties of the channels and metal nodes, further together managing the catalytic performance of Pt NPs through enhanced steric hindrance and multi-pathway electron transfer.

Fe-Co Alloyed Nanoparticles Catalyzing Efficient Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol in Water

Selective hydrogenation of C=O against the conjugated C=C in cinnamaldehyde (CAL) is indispensable to produce cinnamyl alcohol (COL). Nonetheless, it is challenged by the low selectivity and the need to use organic solvents. Herein, for the first time, we report the use of Fe-Co alloy nanoparticles (NPs) on N-doped carbon support as a selective hydrogenation catalyst to efficiently convert CAL to COL. The resultant catalyst with the optimized Fe/Co ratio of 0.5 can achieve an exceptional COL selectivity of 91.7 % at a CAL conversion of 95.1 % in pure water medium under mild reaction conditions, ranking it the best performed catalyst reported to date. The experimental results confirm that the COL selectivity and CAL conversion efficiency are, respectively promoted by the presence of Fe and Co, while the synergism of the alloyed Fe-Co is the key to concurrently achieve high COL selectivity and CAL conversion efficiency.

The function of metal-organic frameworks in the application of MOF-based composites

In the last two decades, metal-organic frameworks (MOFs), as a class of porous crystalline materials formed by organic linkers coordinated-metal ions, have attracted increasing attention due to their unique structures and wide applications. Compared to single components, various well-designed MOF-based composites combining MOFs with other functional materials, such as nanoparticles, quantum dots, natural enzymes and polymers with remarkably enhanced or novel properties have recently been reported. To efficiently and directionally synthesize high-performance MOF-based composites for specific applications, it is vital to understand the structural-functional relationships and role of MOFs. In this review, preparation methods of MOF-based composites are first summarized and then the relationship between the structure and performance is determined. The functions of MOFs in practical use are classified and discussed through various examples, which may help chemists to understand the structural-functional relationship in MOF-based composites from a new perspective.

Boosting Catalysis of Pd Nanoparticles in MOFs by Pore Wall Engineering: The Roles of Electron Transfer and Adsorption Energy

The chemical environment of metal nanoparticles (NPs) possesses significant influence on their catalytic performance yet is far from being well understood. Herein, tiny Pd NPs are encapsulated into the pore space of metal-organic frameworks (MOFs), UiO-66-X (X = H, OMe, NH₂ , 2OH, 2OH(Hf)), affording Pd@UiO-66-X composites. The surface microenvironment of the Pd NPs is readily modulated by pore wall engineering, via the functional group and metal substitution in the MOFs. Consequently, the catalytic activity of Pd@UiO-66-X follows the order of Pd@UiO-66-OH > Pd@UiO-66-2OH(Hf) > Pd@UiO-66-NH₂ > Pd@UiO-66-OMe > Pd@UiO-66-H toward the hydrogenation of benzoic acid. It is found that the activity difference is not only ascribed to the distinct charge transfer between Pd and the MOF, but is also explained by the discriminated substrate adsorption energy of Pd@UiO-66-X (-OH < -2OH(Hf) < -NH₂ < -OMe < -H), based on CO-diffuse reflectance infrared Fourier transform spectra and density-functional theory (DFT) calculations. The Pd@UiO-66-OH, featuring a high Pd electronic state and moderate adsorption energy, displays the highest activity. This work highlights the influence of the surface microenvironment of guest metal NPs, the catalytic activity of which is dominated by electron transfer and the adsorption energy, via the systematic substitution of metal and functional groups in host MOFs.

Rational Localization of Metal Nanoparticles in Yolk-Shell MOFs for Enhancing Catalytic Performance in Selective Hydrogenation of Cinnamaldehyde

The development of sustainable catalysts to simultaneously improve activity and selectivity remains a challenge. Herein, it is demonstrated that metal nanoparticles (MNPs) can be encapsulated into a yolk-shell metal-organic framework (MOF) with controllable spatial localization to optimize catalytic performance. When the MNPs are located in the void space between the shell and the core of the MOF, the resulting MNPs@MOF composites show both high catalytic activity and selectivity toward the hydrogenation of α,β-unsaturated aldehydes. In particular, the easily recoverable and stable Pt_void @MOF(Y) shows an exceptionally high selectivity of 98.2 % for cinnamyl alcohol at a high conversion of 97 %. The excellent performance can be attributed to easy diffusion of the reactants to access highly exposed MNPs in the MOF support, as well as the improved adsorption of the reactant and desorption of the product due to the appropriate metal-support interaction and rich void space between core and shell.

Recent developments in the control of selectivity in hydrogenation reactions by confined metal functionalities

Confining metal active species in the voids of porous solid matrices such as zeolites, metal–organic frameworks (MOFs), and carbon nanotubes (CNTs) can bring fascinating key advantages in the field of selective hydrogenation reactions.

Spherical Sandwich Au@Pd@UIO-67/Pt@UIO- n ( n = 66, 67, 69) Core-Shell Catalysts: Zr-Based Metal-Organic Frameworks for Effectively Regulating the Reverse Water-Gas Shift Reaction

In this study, spherical sandwich Au@Pd@UIO-67/Pt@UIO- n ( n = 66, 67, 69) core-shell catalysts were assembled. Au nanoparticles (NPs) were used as the core for the epitaxial growth of Pd shells, and Au@Pd core-shell NPs were successfully encapsulated in the center of monodispersed Au@Pd@UIO-67 nanospheres. Pt NPs were fully fixed onto the nanosphere surfaces to obtain Au@Pd@UIO-67/Pt composites; further coating with UIO- n led to Au@Pd@UIO-67/Pt@UIO- n, in which Pt NPs are sandwiched between the Au@Pd@UIO-67 core and the UIO- n shell. The Au@Pd core-shell NPs efficiently controlled the morphology and structure of UIO-67 and enhanced the CO selectivity of the catalyst. Pt NPs increased the CO₂ conversion, and the UIO- n component effectively regulated the reverse water-gas shift reaction.

Pt nanoparticles supported on YCoxFe1−xO3 perovskite oxides: highly efficient catalysts for liquid-phase hydrogenation of cinnamaldehyde

The Pt/YCo_0.3Fe_0.7O₃ catalyst furnished ca. 95% selectivity to cinnamyl alcohol at nearly full conversion for the selective hydrogenation of cinnamaldehyde.

Sn-doped Pt catalyst supported on hierarchical porous ZSM-5 for the liquid-phase hydrogenation of cinnamaldehyde

3Pt0.05Sn/HPZSM-5 serves as a much more active and recyclable catalyst for the liquid-phase selective hydrogenation of cinnamaldehyde to cinnamyl alcohol.

Metal⁻Organic Framework Thin Film-Based Dye Sensitized Solar Cells with Enhanced Photocurrent

Metal–organic framework thin film-based dye sensitized solar cell is fabricated with highly oriented, crystalline, and porous Zn-perylene metal-organic framework (MOF) thin film (SURMOF) which is integrated with Bodipy embedded in poly(methyl methacrylate). It has been demonstrated that the photocurrent can be enhanced by a factor of 5 relative to Zn-perylene MOF thin film due to triplet–triplet annihilation up-conversion between the Bodipy/PMMA sensitizer and the Zn-perylene MOF thin film acceptor using Co(bpy)₃^2+/3+ as redox mediator.

Porous Pt-Ni Nanowires within In Situ Generated Metal-Organic Frameworks for Highly Chemoselective Cinnamaldehyde Hydrogenation

Although chemoselective hydrogenation of unsaturated aldehydes is the major route to highly valuable industrially demanded unsaturated alcohols, it is still challenging, as the production of saturated aldehydes is more favorable over unsaturated alcohols from the view of thermodynamics. By combining the structural features of porous nanowires (NWs) and metal-organic frameworks (MOFs), a unique class of porous Pt-Ni NWs in situ encapsuled by MOFs (Pt-Ni NWs@Ni/Fex-MOFs) is designed to enhance the unsaturated alcohols selectivity in the cinnamaldehyde (CAL) hydrogenation. A detailed catalytic study shows that the porous Pt-Ni NWs@Ni/Fe_x -MOFs exhibit volcano-type activity and selectivity in CAL hydrogenation as a function of Fe content. The optimized porous PtNi_2.20 NWs@Ni/Fe₄ -MOF is highly active and selective with 99.5% CAL conversion and 83.3% cinnamyl alcohol selectivity due to the confinement effect, appropriate thickness of MOF and its optimized electronic structure, and excellent durability with negligible activity and selectivity loss after five runs.

Selective hydrogenation of unsaturated aldehydes over Pt nanoparticles promoted by the cooperation of steric and electronic effects

The selective hydrogenation of α,β-unsaturated aldehydes to unsaturated alcohols can reach high selectivity and activity at room temperature using Pt nanoparticles immobilized on a non-porous Al₂O₃ support stabilized by aspartic acid.

Encapsulation of metal nanostructures into metal–organic frameworks

Recent developments in controlling the location, composition, shape, and structure of metal nanostructures in MOFs for a variety of applications.

Platinum Nanoparticle-embedded Porous Diamond Spherical Particles as an Active and Stable Heterogeneous Catalyst

Platinum nanoparticle-embedded porous diamond spherical particles (PtNP@PDSPs), as an active and stable catalyst, were fabricated by spray-drying of an aqueous slurry containing nanodiamond (ND) particles, platinum nanoparticles (PtNP), and polyethylene glycol (PEG) to form ND/PtNP/PEG composite spherical particles, followed by removal of PEG and a short-time diamond growth on the surface. The average diameter of the PtNP@PDSPs can be controlled in the range of 1–5 μm according to the spray-drying conditions. The Brunauer-Emmett-Teller (BET) surface area and average pore diameter of the PtNP@PDSPs were estimated to be ca. 170–300 m² g⁻¹ and ca. 4–13 nm, respectively. When ND with the size of 20–30 nm was used, the size of PtNP in the PtNP@PDSP was almost unchanged at 5–6 nm even after high temperature processes and reuse test for catalytic reaction, showing stable supporting. The catalytic activity of the PtNP@PDSPs for the dehydrogenation of cyclohexane was higher than that for a Pt/C catalyst, which is attributed to the stable PtNP support by the three-dimensional packing of ND and efficient mass transfer via the interconnected through-hole pores in the PDSPs.

Metal–organic frameworks meet metal nanoparticles: synergistic effect for enhanced catalysis

This review highlights recent advances in the hybridization of metal–organic frameworks and metal nanoparticles for their synergistically enhanced catalysis.

One-pot redox synthesis of Pt/Fe3O4 catalyst for efficiently chemoselective hydrogenation of cinnamaldehyde

The Pt/Fe₃O₄ catalyst is prepared by a redox method. Benefiting from the electronic effect between Pt and Fe₃O₄, the adsorption of CO bond upon cinnamaldehyde is superior than that of CC bond, resulting in high catalytic activity and selectivity.