Photocatalytic Composite of a Floating BiOBr@Graphene Oxide@Melamine Foam for Efficient Removal of Organics

A novel multifunctional magnetically recyclable BiOBr/ZnFe2O4-GO S-scheme ternary heterojunction: Photothermal synergistic catalysis under Vis/NIR light and NIR-driven photothermal detection of tetracycline

The threat of tetracycline (TC) to human health has become a significant issue that cannot be disregarded. Herein, in order to achieve effective degradation and high-sensitivity detection of TC, BiOBr/ZnFe2O4-GO (BOB/ZFO-GO) S-scheme heterojunction nanocomposites (NCs) have been prepared using hydrothermal method. GO with high light absorption capacity accelerated the electron transfer between BiOBr and ZnFe2O4 nanocrystals and extended the light absorption region of BOB/ZFO NCs. The optimal GO addition of BOB/ZFO-GO NCs could degrade TC solution of 10 mg/L in 80 min and have a high reaction rate constant (k) of 0.072 min-1 under visible/NIR light. According to calculations, the non-metal photocatalyst (BOB/ZFO-GO(2)) with the best degradation performance had a photothermal conversion efficiency of up to 23%. Meanwhile, BOB/ZFO-GO NCs could be recycled by magnetic field. The excellent photocatalytic and photothermal performance could be maintained even after several cycles. In addition, a photothermal detection sensor based on a photothermal material/specific recognition element/tetracycline sandwich-type structure was constructed for the trace detection of TC concentration with a detection limit as low as 10-4 ng/mL. This research provides a unique idea for the multi-functionalization of photocatalysts and has a wide range of potential applications for the identification and treatment of organic wastewater.

Sonophotocatalytic Dye Degradation Using rGO-BiVO4 Composites

Reduced graphene oxide (rGO)/bismuth vanadate BiVO4 composites are fabricated with varied rGO amounts (0, 1, 2, and 3 wt%) through the synergetic effects of ultrasonication, photoinduced reduction, and hydrothermal methods, and the materials are tested as tools for sonophotocatalytic methylene blue (MB) dye degradation. The effect of rGO content on the sonophotocatalytic dye degradation capabilities of the composites are explored. Characterization of the proposed materials is done through transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transformation infrared spectroscopy as well as scanning electron microscopy. The coexistence of BiVO4 and rGO is confirmed using Raman spectroscopy and XRD. TEM confirms the existence of interfaces between rGO and BiVO4 and XPS affirms the existence of varied elemental oxidation states. In order to investigate the charge carriers transportation, time-dependent photocurrent responses of BiVO4 and 2 wt%- rGO/BiVO4 are done under visible light irradiation. The sonophotocatalytic MB dye degradation in an aqueous medium displays promising enhancement with rGO doping in rGO/BiVO4 composite. The 2 wt%- rGO/BiVO4 sample exhibits ≈52% MB dye degradation efficiency as compared to pure BiVO4 (≈25%) in 180 min of the sonophotocatalysis experiment. Phytotoxicity analysis through germination index is done using vigna radiata seeds.

Integrated photocatalysis-adsorption-membrane separation in rotating reactor for synergistic removal of RhB

A synergistic system of integrated photocatalysis-adsorption-membrane separation in a rotating reactor was designed. The composite membrane was prepared via filtration process under vacuum, and it was composed of graphene oxide (GO) acted as the separation membrane, activated carbon (AC) as the adsorbent and Ag@BiOBr as the photocatalyst, respectively. In this Ag@BiOBr/AC/GO membrane system, rotation of the membrane could avoid the light-shielding effect from organic color pollutants to achieve the complete removal of pollutants. More importantly, the synergistic effect among photocatalysis, adsorption and membrane separation in rotating reactor was significant for the efficient removal of rhodamine B (RhB). In the Ag@BiOBr/AC/GO composite membrane, GO membrane layer could reject the organic molecular by the assistance of AC layer with efficient adsorption capacity, and Ag@BiOBr at outer layer could photodegrade the organics under visible light irradiation. The photocatalysis process could solve the problem of membrane fouling and adsorption could assist GO membrane for stopping the permeation of pollutants. Meanwhile, GO membrane was not only beneficial for catalyst recovery, but also could concentrate the pollutants via the membrane separation to accelerate the photocatalytic degradation. At the same time, both the photocatalysis degradation and membrane separation could promote the adsorption ability of AC. This synergistic system showed the significant potential for the practical application in the future.

Fabrication and investigation on Ag nanowires/TiO2 nanosheets/graphene hybrid nanocomposite and its water treatment performance

In this paper, a novel Ag nanowires/TiO₂ nanosheets/graphene nanocomposite was fabricated via a facile method of hydrothermal and calcination, and then the water treatment performance of it was evaluated for methylene blue (MB) and Escherichia coli removal. The as-prepared Ag nanowires/TiO₂ nanosheets/graphene nanocomposite was characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), UV-visible diffuse reflection spectroscopy (DRS), molecular dynamics simulation, and gas chromatography-mass spectrometry (GC-MS). All data revealed that the Ag/TiO₂/graphene nanocomposite showed a rich cell structure. The photocatalytic activity of Ag/TiO₂/graphene nanocomposite is higher than those of pristine TiO₂ nanosheets and TiO₂/graphene nanocomposite. Under optimized conditions, the degradation efficiency was 100% and 71% for MB (30 mg/L) and with 10 mg Ag/TiO₂/graphene nanocomposite under UV and visible light irradiation for 2 h, respectively. Ag/TiO₂/graphene also showed excellent bacteria-killing activity. Meanwhile, the Ag/TiO₂/graphene nanocomposite exhibited microstructure stability and cyclic stability. The water treatment performance was enhanced mainly attributed to the excellent adsorption performance of graphene and the high efficiency in separation of electron-hole pairs induced by the remarkable synergistic effects of TiO₂, Ag, and graphene. On the basis of the experimental results, the photocatalytic mechanism and MB degradation mechanism were proposed. It is hoped that our work could avert the misleading message to the readership, hence offering a valuable source of reference on fabricating composite photocatalyst with stable microstructure and excellent performance for their application in the environment clean-up. Graphical abstract.

Impacts of sulfidation of silver nanowires on the degradation of bisphenol A in water

Silver nanowires (AgNWs) are widely produced in many electronic and optical products, and could be inevitably discharged into the aquatic environments. Sulfidation is one of the most important transformation processes of AgNWs, and could significantly affect their fate and interactions with other pollutants in aquatic environment. In the present study, the sulfidation products of AgNWs with different atomic ratio of Ag and S were prepared under environmentally relevant conditions. The crystal structure, elemental composition, morphology and size of the sulfidation products were comprehensively characterized by powder X-ray diffraction, UV-vis spectroscopy, X-ray photoelectron spectroscopy and transmission electron microscope. The products were heterostructured nanowires and the Ag₂S/Ag molar ratio increased with extension of the reaction time. The produced Ag₂S-Ag nanowires displayed a good photocatalytic activity and facilitated the degradation of the copresent organic pollutant bisphenol A (BPA) under simulated sunlight irradiation. As sulfidation time increased, more Ag₂S was generated and the Ag₂S-Ag composites displayed high promotion effect on BPA degradation. This effect could be ascribed to the favorable synergistic effects between Ag₂S and AgNWs, such as high electron-hole separation efficiency and low charge transfer resistance. The chemical scavenger experiments demonstrated that superoxide anion radicals and photogenerated holes in the sulfidation products of AgNWs could be the main reactive species for photocatalytic degradation.

Ag-doped ZnO nanorods embedded reduced graphene oxide nanocomposite for photo-electrochemical applications

In this paper, the Ag-doped zinc oxide nanorods embedded reduced graphene oxide (ZnO:Ag/rGO) nanocomposite was synthesized for photocatalytic degradation of methyl orange (MO) in the water. The microstructural results confirmed the successful decoration of Ag-doped ZnO nanorods on rGO matrix. The photocatalytic properties, including photocatalytic degradation, charge transfer kinetics and photocurrent generation, are systematically investigated using electrochemical impedance spectroscopy (EIS), photocurrent transient response (PCTR) and open circuit voltage decay (OCVD). The results of photocatalytic dye degradation measurements indicated that ZnO:Ag/rGO nanocomposite is more effective than pristine ZnO to degrade the MO dye, and the degradation rate reached 40.6% in 30 min. The decomposition of MO with ZnO:Ag/rGO nanostructure followed first-order reaction kinetics with a reaction rate constant (K a) of 0.01746 min-1. The EIS, PCTR and OCVD measurements revealed that the Ag doping and incorporation of rGO could suppress the recombination probability in ZnO by the separation of photo-generated electron-hole pairs, which leads to the enhanced photocurrent generation and photocatalytic activity. The photocurrent density of ZnO:Ag/rGO, ZnO/rGO and pristine ZnO are 206, 121.4 and 88.8 nA cm-2, respectively.

Polyaniline/Reduced Graphene Oxide Composite-Enhanced Visible-Light-Driven Photocatalytic Activity for the Degradation of Organic Dyes

Creation of an innovative composite photocatalyst, to advance its performance, has attracted researchers to the field of photocatalysis. In this article, a new photocatalyst based on polyaniline/reduced graphene oxide (PANI/RGO) composites has been prepared via the in situ oxidative polymerization method employing RGO as a template. For thermoelectric applications, though a higher percentage (50 wt %) of RGO has been used, for photocatalytic activity, lesser percentages (2, 5, and 8 wt %) of RGO in the composite have given a significant outcome. Furthermore, photoluminescence (PL) spectra, time-resolved fluorescence spectra, and Brunauer-Emmett-Teller surface area analyses confirmed the improved photocatalytic mechanism. PANI/RGO composites under visible light irradiation exhibit amazingly improved activity toward the degradation of cationic and anionic dyes in comparison with pristine PANI or RGO. Here, a PANI/RGO composite, with 5 wt % RGO(PG2), has emerged as the best combination with the degradation percentages of 99.68, 99.35, and 98.73 for malachite green, rhodamine B, and congo red within 15, 30, and 40 min, respectively. Experimental findings show that the introduction of RGO can relieve the agglomeration of PANI nanoparticles and enhance the light absorption of the materials due to an increased surface area. Moreover, the PG2 composite also showed excellent photocatalytic activity to reduce noxious Cr(VI). The effective removal of Cr(VI) up to 94.7% at pH 2 was observed within only 15 min. With the help of the active species trapping experiment, a plausible mechanism for the photocatalytic degradation has been proposed. The heightened activity of the as-synthesized composite compared to that of neat PANI or RGO was generally because of high concentrations of ^•OH radicals and partly of ^•O₂ ^- and holes (h⁺) as concluded from the nitroblue tetrazolium probe test and photoluminescence experiment. It is hoped that the exceptional photocatalytic performance of our work makes the conducting polymer-based composite an effective alternative in wastewater treatment for industrial applications.