Coupling of Epoxides and Lactones by Cationic Indium Catalysts To Form Functionalized Spiro-Orthoesters

Synthesis of High-Molecular-Weight Poly(ether-alt-ester) by Selective Double Ring-Opening Polymerization of Spiroorthoesters

We report the selective double ring-opening polymerization of presequenced spiroorthoester monomers to form high-molecular-weight (≈90 kDa) poly(ether-alt-ester)s with a simple cationic alkyl gallium catalyst. The selective formation of double ring-opened polymer units was confirmed by NMR and IR spectroscopies. Thermal and rheological properties of homo- and copolymers were further characterized by differential scanning calorimetry, thermogravimetric analysis, and stress-controlled rotational rheometry. Linear viscoelastic moduli show that these systems are well entangled (plateau modulus), thereby possessing nearly terminal relaxation at long time scales (low frequencies) and Rouse segmental dynamics at short time scales (high frequencies) with characteristic slopes. These are the highest-molecular-weight poly(ether-alt-ester)s reported to date.

Comparison of Imine- and Phosphinimine-Supported Indium Complexes: Tuning the Reactivity for the Sequential and Simultaneous Copolymerization of Lactide and ε-Caprolactone

Imine- and phosphinimine-supported indium complexes were used as catalysts in the polymerization of racemic lactide and ε-caprolactone as well as their copolymerization by the sequential and simultaneous addition of monomers. Tuning the electronics and sterics of the indium centers by either (i) changing the nature of the nitrogen donors and (ii) coordinating a hemilabile side group had a significant effect on the reactivity of the complexes, their stability, and their control in the synthesis of block copolymers. Specifically, the imine-supported complex (5) showed the highest activity in the homo- and copolymerization of the cyclic esters, in contrast to the phosphinimine-supported complex (7), which was significantly slower and less stable. The presence of morpholine and thiomorpholine hemilabile side groups either reduced the activity or prevented the formation of alkoxide complexes.

Temperature triggered alternating copolymerization of epoxides and lactones via pre-sequenced spiroorthoester intermediates

We report the alternating copolymerization of caprolactone and epoxide through the in situ formation of pre-sequenced spiroorthoester monomer. The reaction is catalyzed by the temperature triggered, bifunctional cationic indium complex (±)-[(NN_iO_tBu)In(CH₂SiMe₃)][B(C₆F₅)₄] (1). 1 can catalyze the coupling of epoxide and lactone to form spiroorthoester at 60 °C and its double ring-opening polymerization at 110 °C to form poly(ether-alt-ester). The post-polymerization modification and degradation of the poly(ether-alt-ester) are further investigated.

We report the alternating copolymerization of caprolactone and epoxide through the in situ formation of pre-sequenced spiroorthoester monomer.

Indium-Catalyzed CO2/Epoxide Copolymerization: Enhancing Reactivity with a Hemilabile Phosphine Donor

Group 13 metal complexes have emerged as powerful catalysts for transforming CO₂ into added-value products. However, direct comparisons of reactivity between Al, Ga, and In catalysts are rare. We report aluminum (1), gallium (2), and indium (3) complexes supported by a half-salen H[PNNO] ligand with a pendent phosphine donor and investigate their activity as catalysts for the copolymerization of CO₂ and cyclohexene oxide. In solution, the P-donor is dissociated for the Al and Ga complexes while for the In complex it exhibits hemilabile behavior. The indium complex shows higher conversion and selectivity than the Al or Ga analogues. The mechanism of the reaction was studied by NMR and FTIR spectroscopy experiments as well as structural characterization of off-cycle catalytic intermediate indium trichloride complex [(PNNO)InCl₃][TBA] (4). This study highlights the impact of a hemilabile phosphine group on group 13 metals and provides a detailed analysis of the initiation step in CO₂/epoxide copolymerization reactions.

Expanding Monomers as Anti-Shrinkage Additives

Commonly, volumetric shrinkage occurs during polymerizations due to the shortening of the equilibrium Van der Waals distance of two molecules to the length of a (significantly shorter) covalent bond. This volumetric shrinkage can have severe influence on the materials’ properties. One strategy to overcome this volumetric shrinkage is the use of expanding monomers that show volumetric expansion during polymerization reactions. Such monomers exhibit cyclic or even oligocyclic structural motifs with a correspondingly dense atomic packing. During the ring-opening reaction of such monomers, linear structures with atomic packing of lower density are formed, which results in volumetric expansion or at least reduced volumetric shrinkage. This review provides a concise overview of expanding monomers with a focus on the elucidation of structure-property relationships. Preceded by a brief introduction of measuring techniques for the quantification of volumetric changes, the most prominent classes of expanding monomers will be presented and discussed, namely cycloalkanes and cycloalkenes, oxacycles, benzoxazines, as well as thiocyclic compounds. Spiroorthoesters, spiroorthocarbonates, cyclic carbonates, and benzoxazines are particularly highlighted.

Cationic aluminum, gallium, and indium complexes in catalysis

The introduction of cationic charge allows cationic group 13 complexes to be excellent Lewis acid catalysts. Cationic aluminum, gallium, and indium complexes in catalysis are comprehensively reviewed based on the reaction type.

Applications of alkyl orthoesters as valuable substrates in organic transformations, focusing on reaction media

In this review we focus on applications of alkyl orthoesters as valuable and efficient substrates to perform various classes of two-component and multi-component organic reactions. The article has classified them according to two aspects, which are: (i) a focus on the reaction medium (solvent-free conditions, aqueous media, and organic solvents); and (ii) an examination of product structures. Reaction accomplishment under solvent-free conditions is an eco-friendly process with the absence of volatile toxic solvents, which puts it in line with green chemistry goals. Water is an interesting choice in organic transformations due to its inexpensiveness and safety. The authors hope their assessment will help chemists to attain new approaches for utilizing alkyl orthoesters in various organic synthetic methods. The review covers the corresponding literature up to the beginning of 2020.

In this review we focus on applications of alkyl orthoesters as valuable and efficient substrates to perform various classes of two-component and multi-component organic reactions.

Cationic indium catalysts for ring opening polymerization: tuning reactivity with hemilabile ligands

This is a comprehensive study of the effects of rationally designed hemilabile ligands on the stability, reactivity, and change in catalytic behavior of indium complexes. We report cationic alkyl indium complexes supported by a family of hemi-salen type ligands bearing hemilabile thiophenyl (2a), furfuryl (2b) and pyridyl (2c) pendant donor arms. Shelf-life and stability of these complexes followed the trend 2a < 2b < 2c, showing direct correlation to the affinity of the pendant donor group to the indium center. Reactivity towards polymerization of epichlorohydrin and cyclohexene oxide followed the trend 2a > 2b > 2c with control of polymerization following an inverse relationship to reactivity. Surprisingly, 2c polymerized racemic lactide without an external initiator, likely through an alkyl-initiated coordination-insertion mechanism.

Redox-switchable ring-opening polymerization by tridentate ONN-type titanium and zirconium catalysts

A study designed to ascertain the impact that ligand symmetry, number of redox-active moieties, and identity of the active metal center have on the catalytic ring-opening polymerization performance of redox-switchable catalysts.

Cationic indium complexes for the copolymerization of functionalized epoxides with cyclic ethers and lactide

We report the first example of discrete cationic indium complexes for the copolymerization of epoxides, cyclic ethers, and lactide. [SalenIn][SbF6] in particular proved to be a highly active catalyst for the homo-polymerization of functionalized epoxides and their copolymerization with other cyclic ethers THF, oxetane and oxepane. This catalyst also proved competent in the polymerization of epichlorohydrin and lactide, forming copolymers with good activity and control. Investigation of the role of counteranions and solvent donors on the kinetics of polymerization of epoxides revealed a subtle effect of solvents on initiation rates.

Recent progress in the application of group 1, 2 & 13 metal complexes as catalysts for the ring opening polymerization of cyclic esters

This review focuses on recent developments concerned with the use of well-defined main group complexes as (pre-)catalysts for the ROP of cyclic esters to give aliphatic polyesters; factors influencing catalytic activity, selectivity and polymer properties are all discussed.