Visualization of Structural Changes During Deactivation and Regeneration of FAU Zeolite for Catalytic Fast Pyrolysis of Lignin Using NMR and Electron Microscopy Techniques

Regeneration of pristine HZSM-5 extrudates during the production of deeply deoxygenated bio-oil from ex situ catalytic fast pyrolysis of biomass in a bench-scale fluidised-bed reactor

Deeply deoxygenated bio-oil with ∼1 wt% oxygen is produced in ex situ catalytic fast pyrolysis applying an unmodified HZSM-5 with good regeneration performance.

Catalytic fast pyrolysis of enzymatic hydrolysis lignin over Lewis-acid catalyst niobium pentoxide and mechanism study

Lewis-acid catalyst Nb₂O₅ is first applied in catalytic fast pyrolysis (CFP) of enzymatic hydrolysis lignin (EHL) to produce aromatic hydrocarbons (AHs) that can be used as alternative liquid fuels. The catalyst exhibits a good talent to convert lignin into AHs with quite little polycyclic aromatic hydrocarbons (PAHs) formation. The yield of AHs reaches 11.2 wt% and monocyclic aromatic hydrocarbons (MAHs) takes up 94% under the optimized condition (Catalyst to Lignin ratio 9:1, 650 °C). No coke is generated during the reactions. The reaction sequence is proposed and verified by model compound reactions. Furthermore, DFT calculations are performed to understand the mechanisms of limitation of PAHs or char/coke formation and the efficient deoxygenation ability over catalyst. Nb₂O₅ with Lewis acid sites is proved to be a promising catalyst for the production of AHs from lignin. This work provides a new idea on choice of catalysts for CFP of lignin in future.

Biomass Pyrolysis Technology by Catalytic Fast Pyrolysis, Catalytic Co-Pyrolysis and Microwave-Assisted Pyrolysis: A Review

With the aggravation of the energy crisis and environmental problems, biomass resource, as a renewable carbon resource, has received great attention. Catalytic fast pyrolysis (CFP) is a promising technology, which can convert solid biomass into high value liquid fuel, bio-char and syngas. Catalyst plays a vital role in the rapid pyrolysis, which can increase the yield and selectivity of aromatics and other products in bio-oil. In this paper, the traditional zeolite catalysts and metal modified zeolite catalysts used in CFP are summarized. The influence of the catalysts on the yield and selectivity of the product obtained from pyrolysis was discussed. The deactivation and regeneration of the catalyst were discussed. Catalytic co-pyrolysis (CCP) and microwave-assisted pyrolysis (MAP) are new technologies developed in traditional pyrolysis technology. CCP improves the problem of hydrogen deficiency in the biomass pyrolysis process and raises the yield and character of pyrolysis products, through the co-feeding of biomass and hydrogen-rich substances. The pyrolysis reactions of biomass and polymers (plastics and waste tires) in CCP were reviewed to obtain the influence of co-pyrolysis on composition and selectivity of pyrolysis products. The catalytic mechanism of the catalyst in CCP and the reaction path of the product are described, which is very important to improve the understanding of co-pyrolysis technology. In addition, the effects of biomass pretreatment, microwave adsorbent, catalyst and other reaction conditions on the pyrolysis products of MAP were reviewed, and the application of MAP in the preparation of high value-added biofuels, activated carbon and syngas was introduced.

Catalytic Pyrolysis of Biomass and Polymer Wastes

Oil produced by the pyrolysis of biomass and co-pyrolysis of biomass with waste synthetic polymers has significant potential as a substitute for fossil fuels. However, the relatively poor properties found in pyrolysis oil—such as high oxygen content, low caloric value, and physicochemical instability—hampers its practical utilization as a commercial petroleum fuel replacement or additive. This review focuses on pyrolysis catalyst design, impact of using real waste feedstocks, catalyst deactivation and regeneration, and optimization of product distributions to support the production of high value-added products. Co-pyrolysis of two or more feedstock materials is shown to increase oil yield, caloric value, and aromatic hydrocarbon content. In addition, the co-pyrolysis of biomass and polymer waste can contribute to a reduction in production costs, expand waste disposal options, and reduce environmental impacts. Several promising options for catalytic pyrolysis to become industrially viable are also discussed.