Y and ZSM-5 Hierarchical Zeolites Prepared Using a Surfactant-Mediated Strategy: Effect of the Treatment Conditions

Diffusional limitations associated with zeolite microporous systems can be overcome by developing hierarchical zeolites, i.e., materials with a micro- and mesoporous framework. In this work, Y and ZSM-5 zeolites were modified using a surfactant-mediated hydrothermal alkaline method, with NaOH and cetyltrimethylammonium bromide (CTAB). For Y zeolite, after a mild acidic pretreatment, the effect of the NaOH+CTAB treatment time was investigated. For ZSM-5 zeolite, different concentrations of the base and acid solutions were tested in the two-step pretreatment preceding the hydrothermal treatment. The properties of the materials were studied with different physical-chemical techniques. Hierarchical Y zeolites were characterized by 3.3-5 nm pores formed during the alkaline treatment through the structure reconstruction around the surfactant aggregates. The effectiveness of the NaOH+CTAB treatment was highly dependent on the duration. For intermediate treatment times (6-12 h), both smaller and larger mesopores were also obtained. Hierarchical ZSM-5 zeolites showed a disordered mesoporosity, mainly resulting from the pretreatment rather than from the subsequent hydrothermal treatment. High mesoporosity was obtained when the concentration of the pretreating base solution was sufficiently high and that of the acid one was not excessive. Hierarchical materials can be obtained for both zeolite structures, but the pretreatment and treatment conditions must be tailored to the starting zeolite and the desired type of mesoporosity.

Hierarchical Zeolites Prepared Using a Surfactant-Mediated Strategy: ZSM-5 vs. Y as Catalysts for Friedel-Crafts Acylation Reaction

Hierarchical ZSM5 and Y zeolites were prepared through a surfactant-mediated strategy with NH4OH changing the duration of the treatment and the amount of CTAB surfactant and taking as reference multiples of the critical micellar concentration (CMC). The materials were characterized using powder X-ray diffraction, N2 adsorption isotherms at -196 °C, and SEM and TEM microscopy. The catalytic performance was evaluated in Friedel-Crafts acylation of furan with acetic anhydride at 80 °C. The alkaline surfactant-mediated treatment had different effects on the two zeolites. For ZSM5, the CTAB molecular aggregates can hardly diffuse inside the medium-size pores, leading mainly to intercrystalline mesoporosity and increased external surface area, with no positive catalytic impact. On the other hand, for large-pore Y zeolite, the CTAB molecular aggregates can easily diffuse and promote the rearrangement of crystal units around micelles, causing the enlargement of the pores, i.e., intracrystalline porosity. The optimized Y-based sample, treated for 12 h with a CTAB amount 32 times the CMC, shows an increase in product yield and rate constant that was not observed when a higher amount of surfactant was added. The reuse of spent catalysts upon thermal treatment at 400 °C shows a regeneration efficiency around 90%, showing good potentialities for the modified catalysts.

Novel Copper(II) Complexes with Dipinodiazafluorene Ligands: Synthesis, Structure, Magnetic and Catalytic Properties

The reactions of CuX₂ (X = Cl, Br) with dipinodiazafluorenes yielded four new complexes [CuX₂L₁]₂ (X = Cl (1), Br (2), L₁ = (1R,3R,8R,10R)-2,2,9,9-Tetramethyl-3,4,7,8,9,10-hexahydro-1H-1,3:8,10-dimethanocyclopenta [1,2-b:5,4-b’]diquinolin-12(2H)-one) and [(CuX₂)₂L₂]n (X = Cl (3), Br (4), L₂ = (1R,3R,8R,10R,1’R,3’R,8’R,10’R)-2,2,2’,2’,9,9,9’,9’-Octamethyl-1,1’,2,2’,3,3’,4,4’,7,7’,8,8’,9,9’,10,10’-hexadecahydro-1,3:1’,3’:8,10:8’,10’-tetramethano-12,12’-bi(cyclopenta [1,2-b:5,4-b’]diquinolinylidene). The complexes were characterized by IR and EPR spectroscopy, HR-ESI-MS and elemental analysis. The crystal structures of compounds 1, 2 and 4 were determined by X-ray diffraction (XRD) analysis. Complexes 1–2 have a monomeric structure, while complex 4 has a polymeric structure due to additional coordinating N,N sites in L₂. All complexes contain a binuclear fragment {Cu₂(μ-X)_2×2} (X = Cl, Br) in their structures. Each copper atom has a distorted square-pyramidal coordination environment formed by two nitrogen atoms and three halogen atoms. The Cu-N_ax distance is elongated compared to Cu-N_eq. The EPR spectra of compounds 1–4 in CH₃CN confirm their paramagnetic nature due to the d⁹ electronic configuration of the copper(II) ion. The magnetic properties of all compounds were studied by the method of static magnetic susceptibility. For complexes 1 and 2, the effective magnetic moments are µ_eff ≈ 1.87 and 1.83 µ_B (per each Cu²⁺ ion), respectively, in the temperature range 50–300 K, which are close to the theoretical spin value (1.73 µ_B). Ferromagnetic exchange interactions between Cu(II) ions inside {Cu₂(μ-X)₂X₂} (X = Cl, Br) dimers (J/k_B ≈ 25 and 31 K for 1 and 2, respectively) or between dimers (θ′ ≈ 0.30 and 0.47 K for 1 and 2, respectively) were found at low temperatures. For compounds 3 and 4, the magnetic susceptibility is well described by the Curie–Weiss law in the temperature range 1.77–300 K with µ_eff ≈ 1.72 and 1.70 µ_B for 3 and 4, respectively, and weak antiferromagnetic interactions (θ ≈ −0.4 K for 3 and −0.65 K for 4). Complexes 1–4 exhibit high catalytic activity in the oxidation of alkanes and alcohols with peroxides. The maximum yield of cyclohexane oxidation products reached 50% (complex 3). Based on the data on the study of regio- and bond-selectivity, it was concluded that hydroxyl radicals play a decisive role in the oxidation reaction. The initial products in reactions with alkanes are alkyl hydroperoxides.

Zeolites and Related Materials as Catalyst Supports for Hydrocarbon Oxidation Reactions

Catalytic oxidation is a key technology for the conversion of petroleum-based feedstocks into useful chemicals (e.g., adipic acid, caprolactam, glycols, acrylates, and vinyl acetate) since this chemical transformation is always involved in synthesis processes. Millions of tons of these compounds are annually produced worldwide and find applications in all areas of chemical industries, ranging from pharmaceutical to large-scale commodities. The traditional industrial methods to produce large amounts of those compounds involve over-stoichiometric quantities of toxic inorganic reactants and homogeneous catalysts that operate at high temperature, originating large amounts of effluents, often leading to expensive downstream processes, along with nonrecovery of valuable catalysts that are loss within the reactant effluent. Due to the increasingly stringent environmental legislation nowadays, there is considerable pressure to replace these antiquate technologies, focusing on heterogeneous catalysts that can operate under mild reactions conditions, easily recovered, and reused. Parallelly, recent advances in the synthesis and characterization of metal complexes and metal clusters on support surfaces have brought new insights to catalysis and highlight ways to systematic catalysts design. This review aims to provide a comprehensive bibliographic examination over the last 10 years on the development of heterogeneous catalysts, i.e., organometallic complexes or metal clusters immobilized in distinct inorganic supports such as zeolites, hierarchical zeolites, silicas, and clays. The methodologies used to prepare and/or modify the supports are critically reviewed, as well as the methods used for the immobilization of the active species. The applications of the heterogenized catalysts are presented, and some case-studies are discussed in detail.

Adipic Acid Route: Oxidation of Cyclohexene vs. Cyclohexane

A cleaner alternative to the current inefficient oxidation of cyclohexane to adipic acid is presented. Direct oxidation of neat cyclohexene by aq. hydrogen peroxide to adipic acid is selectively achieved in good yield (46%), in the presence of the recyclable C-homoscorpionate iron(II) complex [FeCl2{κ3-HC(pz)3}] (pz = pyrazol-1-yl) and microwave irradiation, by a nitrous oxide-free protocol.

Selective Oxidation of Ethane to Acetic Acid Catalyzed by a C-Scorpionate Iron(II) Complex: A Homogeneous vs. Heterogeneous Comparison

The direct, one-pot oxidation of ethane to acetic acid was, for the first time, performed using a C-scorpionate complex anchored onto a magnetic core-shell support, the Fe₃O₄/TiO₂/[FeCl₂{κ³-HC(pz)₃}] composite. This catalytic system, where the magnetic catalyst is easily recovered and reused, is highly selective to the acetic acid synthesis. The performed green metrics calculations highlight the “greeness” of the new ethane oxidation procedure.

State of the Art and Perspectives of Hierarchical Zeolites: Practical Overview of Synthesis Methods and Use in Catalysis

Microporous zeolites have proven to be of great importance in many chemical processes. Yet, they often suffer from diffusion limitations causing inefficient use of the available catalytically active sites. To address this problem, hierarchical zeolites have been developed, which extensively improve the catalytic performance. There is a multitude of recent literature describing synthesis of and catalysis with these hierarchical zeolites. This review attempts to organize and overview this literature (of the last 5 years), with emphasis on the most important advances with regard to synthesis and application of such zeolites. Special attention is paid to the most common and important 10- and 12-membered ring zeolites (MTT, TON, FER, MFI, MOR, FAU, and *BEA). In contrast to previous reviews, the research per zeolite topology is brought together and discussed here. This allows the reader to instantly find the best synthesis method in accordance to the desired zeolite properties. A summarizing graph is made available to enable the reader to select suitable synthesis procedures based on zeolite acidity and mesoporosity, the two most important tunable properties.

Catalytic Performance of a Magnetic Core-Shell Iron(II) C-Scorpionate under Unconventional Oxidation Conditions

For the first time, herein is reported the use of a magnetic core-shell support for a C-scorpionate metallic complex. The prepared hybrid material, that consists on the C-scorpionate iron(II) complex [FeCl₂{κ³-HC(pz)₃}] (pz, pyrazolyl) immobilized at magnetic core-shell particles (Fe₃O₄/TiO₂), was tested as catalyst for the oxidation of secondary alcohols using the model substrate 1-phenylethanol. Moreover, the application of alternative energy sources (e.g., ultrasounds, microwaves, mechanical or thermal) for the peroxidative alcohol oxidation using the magnetic heterogenized iron(II) scorpionate led to different/unusual outcomes that are presented and discussed.

AgNPs encapsulated by an amine-functionalized polymer nanocatalyst for CO2fixation as a carboxylic acid and the oxidation of cyclohexane under ambient conditions

A novel catalyst comprising Ag NPs grafted to a porous polystyrene material was synthesized for the production of valuable propiolic acid derivativesviaCO₂(1 atm) incorporation, and the oxidation of cyclohexane under ambient reaction conditions.

Sustainability in Catalytic Cyclohexane Oxidation: The Contribution of Porous Support Materials

The development of green and sustainable protocols for synthetic routes is a growing area of research in chemistry worldwide. The development of sustainable processes and products through innovative catalytic materials and technologies, that allow a better use of resources, is undoubtedly a very important issue facing research chemists today. Environmentally and economically advanced catalytic processes for selective alkane oxidations reactions, as is the case of cyclohexane oxidation, are now focused on catalysts’ stability and their reuse, intending to overcome the drawbacks posed by current homogeneous systems. The aim of this short review is to highlight recent contributions in heterogeneous catalysis regarding porous support materials to be applied to cyclohexane oxidation reaction. Different classes of porous materials are covered, from carbon nanomaterials to zeolites, mesoporous silicas, and metal organic frameworks. The role performed by the materials to be used as supports towards an enhancement of the activity/selectivity of the catalytic materials and the ability of recycling and reuse in consecutive catalytic cycles is highlighted.

Novel Methinic Functionalized and Dendritic C-Scorpionates

The study of chelating ligands is undoubtedly one of the most significant fields of research in chemistry. The present work is directed to the synthesis of new functionalized derivatives of tripodal C-scorpionate compounds. Tris-2,2,2-(1-pyrazolyl)ethanol, HOCH₂C(pz)₃ (1), one of the most important derivatives of hydrotris(pyrazolyl)methane, was used as a building block for the synthesis of new functionalized C-scorpionates, aiming to expand the scope of this unexplored class of compounds. The first dendritic C-scorpionate was successfully prepared and used in the important industrial catalytic reactions, Sonogashira and Heck C-C cross-couplings.