Aminal-based Hypercrosslinked Polymer Modified with Small Palladium Nanoparticles for Efficiently Catalytic Reduction of Nitroarenes

Catalytic reduction of nitroarenes by palladium nanoparticles decorated silica@poly(chitosan-N-isopropylacrylamide-methacrylic acid) hybrid microgels

Conversion of toxic nitroarenes into less toxic aryl amines, which are the most suitable precursors for different types of compounds, is done with various materials which are costly or take more time for this conversion. In this regards, a silica@poly(chitosan-N-isopropylacrylamide-methacrylic acid) Si@P(CS-NIPAM-MAA) Si@P(CNM) core-shell microgel system was synthesized through free radical precipitation polymerization (FRPP) and then fabricated with palladium nanoparticles (Pd NPs) by in situ-reduction method to form Si@Pd-P(CNM) and characterized with XRD, TEM, FTIR, SEM, and EDX. The catalytic efficiency of Si@Pd-P(CNM) hybrid microgels was studied for reduction of 4-nitroaniline (4NiA) under diverse conditions. Different nitroarenes were successfully transformed into their corresponding aryl amines with high yields using the Si@Pd-P(CNM) system as catalyst and NaBH4 as reductant. The Si@Pd-P(CNM) catalyst exhibited remarkable catalytic efficiency and recyclability as well as maintaining its catalytic effectiveness over multiple cycles.

Ultrafine and well-dispersed Pd-Ni bimetallic catalyst stabilized by dendrimer-grafted magnetic graphene oxide for selective reduction of toxic nitroarenes under mild conditions

A facile and efficient strategy is introduced for growing a dendrimer structure on the surface of magnetic graphene oxide by using thiol-ene click reaction. The as-synthesized dendrimer-grafted magnetic graphene oxide was used as a suitable support for bimetallic Pd-Ni nanoparticles. The prepared nanocomposite was utilized for the reduction of toxic nitroarenes to aminoarenes by using sodium borohydride in aqueous medium at room temperature. Various nitroarenes with functional groups like nitrile, halogen, carbonyl, hydroxyl, acid, and heterocycles were converted to their corresponding anilines with good to excellent yields. The enhanced performance of the catalyst could be attributed to the synergistic effect between Ni and Pd which causes the reaction to proceed more efficiently. Moreover, the catalyst could be readily isolated from the reaction mixture by utilizing an external magnet and reused till 5th cycles with marginal loss of activity.

Confinement synthesis in porous molecule-based materials: a new opportunity for ultrafine nanostructures

A balance between activity and stability is greatly challenging in designing efficient metal nanoparticles (MNPs) for heterogeneous catalysis. Generally, reducing the size of MNPs to the atomic scale can provide high atom utilization, abundant active sites, and special electronic/band structures, for vastly enhancing their catalytic activity. Nevertheless, due to the dramatically increased surface free energy, such ultrafine nanostructures often suffer from severe aggregation and/or structural degradation during synthesis and catalysis, greatly weakening their reactivities, selectivities and stabilities. Porous molecule-based materials (PMMs), mainly including metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and porous organic polymers (POPs) or cages (POCs), exhibit high specific surface areas, high porosity, and tunable molecular confined space, being promising carriers or precursors to construct ultrafine nanostructures. The confinement effects of their nano/sub-nanopores or specific binding sites can not only effectively limit the agglomeration and growth of MNPs during reduction or pyrolysis processes, but also stabilize the resultant ultrafine nanostructures and modulate their electronic structures and stereochemistry in catalysis. In this review, we highlight the latest advancements in the confinement synthesis in PMMs for constructing atomic-scale nanostructures, such as ultrafine MNPs, nanoclusters, and single atoms. Firstly, we illustrated the typical confinement methods for synthesis. Secondly, we discussed different confinement strategies, including PMM-confinement strategy and PMM-confinement pyrolysis strategy, for synthesizing ultrafine nanostructures. Finally, we put forward the challenges and new opportunities for further applications of confinement synthesis in PMMs.

Controlled growth of ultrafine metal nanoparticles mediated by solid supports

As a unique class of nanomaterials with a high surface-area-to-volume ratio and narrow size distribution, ultrafine metal nanoparticles (UMNPs) have shown exciting properties in many applications, particularly in the field of catalysis. Growing UMNPs in situ on solid supports enables precise control of the UMNP size, and the supports can effectively prevent the aggregation of UMNPs and maintain their high catalytic activity. In this review, we summarize the recent research progress in controlled growth of UMNPs using various solid supports and their applications in catalysis.

Nickel hydroxide nanoparticles decorated napthalene sulfonic acid-doped polyaniline nanotubes as efficient catalysts for nitroarene reduction

Nanosize nickel hydroxide decorated 2-napthalene sulfonic acid-doped polyaniline nanotubes nanocomposites (Ni(OH)₂@NSA-PANI NCs) were successfully developed for the catalytic reduction of aromatic nitro compounds. The Ni(OH)₂@NSA-PANI NCs were synthesised by depositing Ni(OH)₂ nanoparticles onto 2-napthalene sulfonic acid doped PANI nanotubes surface. The resulting material was characterized using field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM), powder X-ray diffraction (P-XRD), Fourier-transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). The prepared nanocomposite showed a remarkable ability to catalytically hydrogenate aromatic nitro compounds using sodium borohydride (NaBH₄) as hydrogen source in aqueous medium at room temperature. Kinetic studies were performed using 4-nitrophenol (4-NP) as the model substrate, using the Langmuir-Hinshelwood model. The catalyst showed pseudo-first-order kinetics, with rate constants estimated between 0.08287 and 0.3649 min^-1. Catalyst recyclability without reduced activity was demonstrated over 10 successive cycles. The optimised nanocomposite catalyst demonstrated a low activation energy barrier towards 4-NP reduction.

Palladium Catalysts Based on Porous Aromatic Frameworks, Modified with Ethanolamino-Groups, for Hydrogenation of Alkynes, Alkenes and Dienes

The current work describes an attempt to synthesize hybrid materials combining porous aromatic frameworks (PAFs) and dendrimers and use them to obtain novel highly active and selective palladium catalysts. PAFs are carbon porous materials with rigid aromatic structure and high stability, and the dendrimers are macromolecules which can effectively stabilize metal nanoparticles and tune their activity in catalytic reactions. Two porous aromatic frameworks, PAF-20 and PAF-30, are modified step-by-step with diethanolamine and hydroxyl groups at the ends of which are replaced by new diethanolamine molecules. Then, palladium nanoparticles are applied to the synthesized materials. Properties of the obtained materials and catalysts are investigated using X-ray photoelectron spectroscopy, transmission electron microscopy, solid state nuclear magnetic resonance spectroscopy, low temperature N2 adsorption and elemental analysis. The resulting catalysts are successfully applied as an efficient and recyclable catalyst for selective hydrogenation of alkynes to alkenes at very high (up to 90,000) substrate/Pd ratios.

Palladium nanoparticles embedded in mesoporous carbons as efficient, green and reusable catalysts for mild hydrogenations of nitroarenes

The reduction of nitroarenes is the most efficient route for the preparation of aromatic primary amines. These reductions are generally performed in the presence of heterogeneous transition metal catalysts, which are rather efficient but long and tedious to prepare. In addition, they contain very expensive metals that are in most cases difficult to reuse. Therefore, the development of efficient, easily accessible and reusable Pd catalysts obtained rapidly from safe and non-toxic starting materials was implemented in this report. Two bottom-up synthesis methods were used, the first consisted in the impregnation of a micro/mesoporous carbon support with a Pd salt solution, followed by thermal reduction (at 300, 450 or 600 °C) while the second involved a direct synthesis based on the co-assembly and pyrolysis (600 °C) of a mixture of a phenolic precursor, glyoxal, a surfactant and a Pd salt. The obtained composites possess Pd nanoparticles (NPs) of tunable sizes (ranging from 1–2 to 7.0 nm) and homogeneously distributed in the carbon framework (pores/walls). It turned out that they were successfully used for mild and environment-friendly hydrogenations of nitroarenes at room temperature under H₂ (1 atm) in EtOH in the presence of only 5 mequiv. of supported Pd. The determinations of the optimal characteristics of the catalysts constituted a second objective of this study. It was found that the activity of the catalysts was strongly dependent on the Pd NPs sizes, i.e., catalysts bearing small Pd NPs (1.2 nm obtained at 300 °C and 3.4 nm obtained at 450 °C) exhibited an excellent activity, while those containing larger Pd NPs (6.4 nm and 7.0 nm obtained at 600 °C, either by indirect or direct methods) were not active. Moreover, the possibility to reuse the catalysts was shown to be dependent on the surface chemistry of the Pd NPs: the smallest Pd NPs are prone to oxidation by air and their surface was gradually covered by a PdO shell decreasing their activity during reuse. A good compromise between intrinsic catalytic activity (i.e. during first use) and possibility of reuse was found in the catalyst made by impregnation followed by reduction at 450 °C since the hydrogenation could be performed in only 2 h in EtOH or even in water. The catalyst was quantitatively recovered after reaction by filtration, used at least 7 times with no loss of efficiency. Advantageously, almost Pd-free primary aromatic amines were obtained since the Pd leaching was very low (<0.1% of the introduced amount). Compared to numerous reports from the literature, the catalysts described here were both easily accessible from eco-friendly precursors and very active for hydrogenations under mild and “green” reaction conditions.

Size induced activity and reusability of mesoporous carbons containing Pd NPs are demonstrated herein for mild and green hydrogenations of nitroarenes.

Pd nanoparticles stabilized with phosphine-functionalized porous ionic polymer for efficient catalytic hydrogenation of nitroarenes in water

Small palladium nanoparticles stabilized with phosphine-functionalized PIP displayed high catalytic activity for nitroarenes hydrogenation. Nano-size Pd particles, electron-donation effect of phosphine ligand, and surface wettability account for its excellent catalytic performance.

A Combined Mechanochemical and Calcination Route to Mixed Cobalt Oxides for the Selective Catalytic Reduction of Nitrophenols

Para-, or 4-nitrophenol, and related nitroaromatics are broadly used compounds in industrial processes and as a result are among the most common anthropogenic pollutants in aqueous industrial effluent; this requires development of practical remediation strategies. Their catalytic reduction to the less toxic and synthetically desirable aminophenols is one strategy. However, to date, the majority of work focuses on catalysts based on precisely tailored, and often noble metal-based nanoparticles. The cost of such systems hampers practical, larger scale application. We report a facile route to bulk cobalt oxide-based materials, via a combined mechanochemical and calcination approach. Vibratory ball milling of CoCl2(H2O)6 with KOH, and subsequent calcination afforded three cobalt oxide-based materials with different combinations of CoO(OH), Co(OH)2, and Co3O4 with different crystallite domains/sizes and surface areas; Co@100, Co@350 and Co@600 (Co@###; # = calcination temp). All three prove active for the catalytic reduction of 4-nitrophenol and related aminonitrophenols. In the case of 4-nitrophenol, Co@350 proved to be the most active catalyst, therein its retention of activity over prolonged exposure to air, moisture, and reducing environments, and applicability in flow processes is demonstrated.

Palladium catalyst immobilized on functionalized microporous organic polymers for C-C coupling reactions

Two microporous organic polymer immobilized palladium (MOP-Pd) catalysts were prepared from benzene and 1,10-phenanthroline by Scholl coupling reaction and Friedel-Crafts reaction, respectively. The structure and composition of the catalyst were characterized by FT-IR, TGA, N2 sorption, SEM, TEM, ICP-AES and XPS. MOP-Pd catalysts were found to possess high specific surface areas, large pore volume and low skeletal bone density. Moreover, the immobilized catalyst also had advantages, such as readily available raw materials, chemical and thermal stability, and low synthetic cost. The Pd catalyst is an effective heterogeneous catalyst for carbon-carbon (C-C) coupling reactions, such as the Heck reaction and Suzuki-Miyaura reaction, affording good to high yields. In these reactions, the catalyst was easily recovered and reused five times without significant activity loss.

Hyper-Cross-Linked Polymer on the Hollow Conjugated Microporous Polymer Platform: A Heterogeneous Catalytic System for Poly(caprolactone) Synthesis

This work shows that the shape-controlled microporous organic polymer (MOP) can be utilized for the morphological engineering of another class of MOP materials. The morphology of a hyper-cross-linked polymer (HCP) was successfully engineered on the hollow conjugated microporous polymer (CMP). Through the postsynthetic modification of HCP bearing BINOLs (HCP-B) on the hollow CMP-like material (H-CMPL), the HCP bearing BINOL phosphoric acid (HCP-BP) was engineered on the H-CMPL platform. The resultant H-CMPL@HCP-BP showed good catalytic performance as a heterogeneous catalytic system and excellent recyclability in the ring-opening polymerization of ε-caprolactones to poly(caprolactone).

Green reusable Pd nanoparticles embedded in phytochemical resins for mild hydrogenations of nitroarenes

Reusable biosourced Pd NPs are prepared and used under environment-friendly conditions for mild and chemospecific hydrogenations of nitroarenes.