Ultrathin Atomic Layer Deposited Al2O3 Overcoat Stabilizes Al2O3-Pt/Ni-Foam Hydrogenation Catalysts

Galvanic exchange seeds the growth of Pt nanostructures on the Ni foam monolith. Subsequent atomic layer deposition of ultrathin Al2O3 followed by annealing under air affords supported Pt catalysts with ultralow loading (0.020 ppm). In addition to the expected enhancement of the stability of the Pt particles on the surface, the ∼2 nm Al2O3 overcoat appears to also play a crucial role in the overall structural integrity of the NiOx nanoplates that grow on the Ni foam surface as a result of the preparative route. The resulting material is physically robust toward repeated handling and showcases retention of catalytic activity over 10 standard catalyst recycling trials, standing in marked contrast to the uncoated samples. Catalyst activity was tested via the hydrogenation of various functionalized styrenes at low temperatures and low hydrogen pressure in ethanol as a solvent, with a TOF as high as 9.5 × 106 h-1 for unfunctionalized styrene. Notably, the catalysts show excellent tolerance toward F, Cl, and Br substituents and no hydrogenation of the aromatic ring.

Microwave-Assisted Synthesis of Pt/SnO2 for the Catalytic Reduction of 4-Nitrophenol to 4-Aminophenol

In this study, we present a new approach for the synthesis of Pt/SnO2 catalysts using microwave radiation. Pt(IV) and Sn(IV) inorganic precursors (H2PtCl6 and SnCl4) and ammonia were used, which allowed the controlled formation of platinum particles on the anisotropic SnO2 support. The synthesized Pt/SnO2 samples are mesoporous and exhibit a reversible physisorption isotherm of type IV. The XRD patterns confirmed the presence of platinum maxima in all Pt/SnO2 samples. The Williamson-Hall diagram showed SnO2 anisotropy with crystallite sizes of ~10 nm along the c-axis (< 00l >) and ~5 nm along the a-axis (< h00 >). SEM analysis revealed anisotropic, urchin-like SnO2 particles. XPS results indicated relatively low average oxidation states of platinum, close to Pt metal. 119Sn Mössbauer spectroscopy indicated electronic interactions between Pt and SnO2 particles. The synthesized samples were used for the catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of excess NaBH4. The catalytic activity of the Pt/SnO2 samples for the reduction of 4-NP to 4-AP was optimized by varying the synthesis parameters and Pt loading. The optimal platinum loading for the reduction of 4-NP to 4-AP on the anisotropic SnO2 support is 5 mol% with an apparent rate constant k = 0.59 × 10-2 s-1. The Pt/SnO2 sample showed exceptional reusability and retained an efficiency of 81.4% after ten cycles.

Remarkably and stable catalytic activity in reduction of 4-nitrophenol by sodium sesquicarbonate-supporting Fe2O3@Pt

Reasonable design of bimetallic nanomaterials with support is beneficial to improve catalytic performance. This work reports a new kind of sodium sesquicarbonate-supporting Fe₂O₃@Pt via etching Fe₃O₄@Pt@SiO₂, which exhibits highly efficient and stable catalytic reduction performance towards 4-NP. Sodium sesquicarbonate-supporting Fe₂O₃@Pt has an interconnected one-dimensional network structure that provides sufficient channels for mass transfer. At the same time, a large amount of Fe₂O₃@Pt is exposed on its surface, which hinders the aggregation of pt clusters and Fe₂O₃ nanoparticles, and facilitates the direct contact of Fe₂O₃@Pt reaction sites with reactant molecules, thus improving the catalytic rate of 4-NP reduction reaction. Moreover, the introduction of non-metallic Fe can not only reduce the consumption of precious metal Pt, but also improve the catalytic efficiency due to the synergistic effect. This study opens up a new avenue to develop robust catalysts for heterogeneous catalytic reactions.

Monomeric and Polymeric Mesoionic N-Heterocyclic Carbene-Tethered Silver Nanoparticles: Synthesis, Stability, and Catalytic Activity

In recent years, N-heterocyclic carbenes (NHCs) have garnered significant attention as promising alternatives to thiols to stabilize metallic nanoparticles and planar surfaces. While most studies thus far have focused on NHC-functionalized gold nanoparticles (AuNPs), as an ideal platform to investigate the role of NHCs in stabilizing such nanoparticles, their ability to protect more unstable coinage metal nanoparticles, such as silver nanoparticles (AgNPs), has been largely overlooked. This is despite the fact that AgNPs possess a much more sensitive optical response that, upon their enhanced stability, can broaden their scope of application in various fields, including nanomedicine and catalysis. In this study, the synthesis and use of monomeric and polymeric mesoionic NHC-Ag(I) complexes as precursors to mono- and multidentate NHC-tethered AgNPs are reported. The polymeric analog was obtained by first synthesizing a polymer, containing 1,2,3-triazole repeat units, employing the copper-catalyzed alkyne-azide cycloaddition click polymerization of monomers containing diazide- and dialkyne functional groups. Subsequent quaternization of the triazole moieties and Ag insertion yielded the target NHC-Ag-containing polymer. Using this polymer as well as its monomeric analog as substrates, AgNPs with either catenated networks of NHCs or monomeric NHCs were fabricated by their reduction using borane-tert-butylamine complex. Our stability studies demonstrate that while monomeric NHCs impart some degree of stability to AgNPs, particularly at elevated temperatures in aqueous as well as organic medium, their polymeric analogs further enhance their stability in acidic environment (pH = 2) and against glutathione (3 mM), as an example of a biologically relevant thiol, in aqueous media. To highlight the application of these NHC-functionalized AgNPs in catalysis, we explore the aqueous phase reduction of methyl orange and 4-nitrophenol.

Catalytic degradation of azo dyes by bimetallic nanoparticles loaded in smart polymer microgels

The contamination of water by azo dyes is increasing rapidly due to their waste use in textile industries. These dyes are very toxic for living things. Therefore, it is very important to remove these dyes from water. Various materials are reported for this purpose. Here, the most effective system of bimetallic nanoparticles in smart polymer microgels was prepared. The microgel system of N-isopropylmethacrylamide (NMA) (monomer) and methacrylic acid (MAa) (comonomer) was synthesized by a free radical precipitation polymerization method and then bimetallic (Ag/Ni) nanoparticles were encapsulated into the P(NMA-MAa) microgels by in situ reduction of both silver and nickel salts by NaBH₄ (reductant) after insertion of both (Ag⁺/Ni²⁺) ions. The P(NMA-MAa) microgels and Ag/Ni-P(NMA-MAa) hybrid microgels were characterized with FTIR, UV-vis, TGA, XRD, DLS, EDX, and STEM. The pH and temperature responsive behavior of Ag/Ni-P(NMA-MAa) was also evaluated. The catalytic efficiency of Ag/Ni-P(NMA-MAa) was assessed for degradation of methyl orange (MOr), congo red (CRe), eriochrome black T (EBlT) and methyl red (MRe) dyes under various conditions in aqueous medium. The apparent rate constant (k ₀) value for MOr, CRe, EBlT and MRe was found to be 0.925 min^-1, 0.486 min^-1, 0.540 min^-1 and 0.525 min^-1 respectively. The Ag/Ni-P(NMA-MAa) was found to be an excellent recyclable catalyst.

Solid-solid synthesis of covalent organic framework as a support for growth of controllable ultrafine Au nanoparticles

Covalent organic frameworks (COFs) are promising supports for the synthesis of noble metal nanoparticles (NM NPs) with controllable sizes and dispersities. However, it is still challenging to synthesize COFs using green and efficient routes. Herein, COFs (TpMA) were prepared by ball milling, which required less solvent and time. They were then used as a support for the growth of ultrafine Au NPs. Using the COFs as supports, five size-controlled ultrafine Au NPs (2.5 ± 0.55- 4.32 ± 1.39 nm) were synthesized (Au@TpMA). It was found that the Au NPs exhibited remarkable dispersibility owing to the support of TpMA. The reduction of 4-nitrophenol to 4-aminophenol was used as a model reaction to evaluate the performance of the Au@TpMA catalyst, which showed excellent catalytic activity for the reduction of 4-nitrophenol. The Au@TpMA catalyst exhibited good stability and recyclability, and the reduction rate was 95% at the end of six successive experiments. In addition, in the presence of the Au@TpMA catalyst, the maximum pseudo-first-order reaction rate constant of 4-nitrophenol was 0.2379 min^-1. From the results of this study, we hope that using COFs-based supports prepared by ball milling for the size-controlled synthesis of NM NPs provides a path forward for the mechanical synthesis of other COFs.

Nickel foam supported porous copper oxide catalysts with noble metal-like activity for aqueous phase reactions

Contiguous metal foams offer a multitude of advantages over conventional powders as supports for nanostructured heterogeneous catalysts; most critically a preformed 3-D porous framework ensuring full directional coverage of supported catalyst, and intrinsic ease of handling and recyclability. Nonetheless, metal foams remain comparatively underused in thermal catalysis compared to more conventional supports such as amorphous carbon, metal oxides, zeolites and more recently MOFs. Herein, we demonstrate a facile preparation of highly-reactive, robust, and easy to handle Ni foam-supported Cu-based metal catalysts. The highly sustainable synthesis requires no specialized equipment, no surfactants or additive redox reagents, uses water as solvent, and CuCl2(H2O)2 as precursor. The resulting material seeds as well-separated micro-crystalline Cu2(OH)3Cl evenly covering the Ni foam. Calcination above 400 °C transforms the Cu2(OH)3Cl to highly porous CuO. All materials display promising activity towards the reduction of 4-nitrophenol and methyl orange. Notably, our leading CuO-based material displays 4-nitrophenol reduction activity comparable with very reactive precious-metal based systems. Recyclability studies highlight the intrinsic ease of handling for the Ni foam support, and our results point to a very robust, highly recyclable catalyst system.

NaYF4:Yb3+(58%),Tm3+@NaYF4@Au nanocomposite for 4-nitrophenol ultrasensitive quantitative detection and highly efficient catalytic reduction

NaYF4:Yb3+(58%),Tm3+@NaYF4@Au composite nanomaterials were designed and synthesized through condition optimization for the quantitative detection and catalytic reduction of 4-NP.

Ag@ZnO/MWCNT ternary nanocomposite as an active and stable catalyst for the 4-nitrophenol reduction in water

The nitroaromatic compounds, known as organic pollutants, have arising attention due to their carcinogenic character, highly dangerous to human health. In this work, the Ag@ZnO/MWCNT ternary nanocomposite synthesized via conjugation of sonochemical and solvothermal treatments manifests high performance in the reduction of 4-nitrophenol in the aqueous media (TOF value of 246 min^-1μmol metal^-1). The incorporation of MWCNT onto the nanocomposite structure favored the reusing of the catalysts even after eight consecutive catalytic runs without catalysts cleaning nor product removal. Obtained samples were characterized by XRD, TEM, UV-vis, Raman and FTIR spectroscopies. It was found that ultrasonic treatment at relatively moderate conditions leads to functionalization of MWCNT, the appearance of C=C and OH groups and change of electronic properties of Ag@ZnO/MWCNT composite which provide its stable material dispersion in aqueous solution and high catalytic performance in the 4-nitrophenol reduction. This technique may be effectively applied for the functionalization of carbon including materials for their usage in an aqueous media.

Electrostatic Interaction-Controlled Formation of Pickering Emulsion for Continuous Flow Catalysis

Although noble metal or non-noble metal-catalyzed reactions are widely used, it is still difficult to apply these reactions in the large-scale synthesis of chemicals because most of the reactions are carried out by the inefficient batch reaction strategy. Herein, Pickering emulsion-based continuous flow catalysis was utilized to address this problem. Cellulose nanofibers with aldehyde groups (ACNF) were generated through oxidizing C2 and C3 hydroxyl groups of cellulose nanofibers into aldehyde groups by NaIO₄, followed by in situ depositing Ag nanoparticles on ACNF to produce Ag-decorated ACNF (ACNF@Ag) via a facile aldehyde-induced reduction method. ACNF@Ag with ∼2 wt % Ag (ACNF@Ag2) has been used to prepare the Pickering emulsion by controlling the electrostatic interaction between ACNF@Ag2 and the oil-water interface via adjusting the pH. It was found that the Pickering emulsion could be generated at a pH around 3.29 and was determined to be the oil-in-water emulsion. The reduction of organic molecules (4-nitrophenol (4-NP), methylene blue (MB), and methyl orange (MO)) was selected as a model reaction to test the reliability of the Pickering emulsion in continuous flow catalysis, which demonstrated very high conversion rates for 4-NP (>98%, 50 h), MB (>99%, 30 h), and MO (>96%, 40 h).

Using a Nitrophenol Cocktail Screen to Improve Catalyst Down-selection

The catalytic reduction of 4-nitrophenol (4NP) with excess NaBH₄ is the benchmark model for quantifying catalytic activity of nanoparticles. Although broadly useful, the reaction can be very selective. This can lead to false positives and negatives when utilized for catalyst down-selection from a broader materials candidate pool. We report a multi-nitrophenol cocktail screening methodology incorporating 4NP and other amino-nitrophenols, utilizing Ag, Au, Pt, and Pd nanoparticles on carbon support. The reduction of the cocktail proceeds with no deleterious side reactions on the time-scale tested. The resulting kinetic rates provide an improved correlation of relative catalyst activity when compared to performance with other reducible moieties (e. g. azo bonds), or when compared to solely 4NP screening.

A Combined Mechanochemical and Calcination Route to Mixed Cobalt Oxides for the Selective Catalytic Reduction of Nitrophenols

Para-, or 4-nitrophenol, and related nitroaromatics are broadly used compounds in industrial processes and as a result are among the most common anthropogenic pollutants in aqueous industrial effluent; this requires development of practical remediation strategies. Their catalytic reduction to the less toxic and synthetically desirable aminophenols is one strategy. However, to date, the majority of work focuses on catalysts based on precisely tailored, and often noble metal-based nanoparticles. The cost of such systems hampers practical, larger scale application. We report a facile route to bulk cobalt oxide-based materials, via a combined mechanochemical and calcination approach. Vibratory ball milling of CoCl2(H2O)6 with KOH, and subsequent calcination afforded three cobalt oxide-based materials with different combinations of CoO(OH), Co(OH)2, and Co3O4 with different crystallite domains/sizes and surface areas; Co@100, Co@350 and Co@600 (Co@###; # = calcination temp). All three prove active for the catalytic reduction of 4-nitrophenol and related aminonitrophenols. In the case of 4-nitrophenol, Co@350 proved to be the most active catalyst, therein its retention of activity over prolonged exposure to air, moisture, and reducing environments, and applicability in flow processes is demonstrated.