Effect of 6,6'-Substituents on Bipyridine-Ligated Ni Catalysts for Cross-Electrophile Coupling

A family of 4,4'-tBu2-2,2'-bipyridine (tBubpy) ligands with substituents in either the 6-position, 4,4'-tBu2-6-Me-bpy (tBubpyMe), or 6 and 6'-positions, 4,4'-tBu2-6,6'-R2-bpy (tBubpyR2; R = Me, iPr, sBu, Ph, or Mes), was synthesized. These ligands were used to prepare Ni complexes in the 0, I, and II oxidation states. We observed that the substituents in the 6 and 6'-positions of the tBubpy ligand impact the properties of the Ni complexes. For example, bulkier substituents in the 6,6'-positions of tBubpy better stabilized (tBubpyR2)NiICl species and resulted in cleaner reduction from (tBubpyR2)NiIICl2. However, bulkier substituents hindered or prevented coordination of tBubpyR2 ligands to Ni0(cod)2. In addition, by using complexes of the type (tBubpyMe)NiCl2 and (tBubpyR2)NiCl2 as precatalysts for different XEC reactions, we demonstrated that the 6 or 6,6' substituents lead to major differences in catalytic performance. Specifically, while (tBubpyMe)NiIICl2 is one of the most active catalysts reported to date for XEC and can facilitate XEC reactions at room temperature, lower turnover frequencies were observed for catalysts containing tBubpyR2 ligands. A detailed study on the catalytic intermediates (tBubpy)Ni(Ar)I and (tBubpyMe2)Ni(Ar)I revealed several factors that likely contributed to the differences in catalytic activity. For example, whereas complexes of the type (tBubpy)Ni(Ar)I are low spin and relatively stable, complexes of the type (tBubpyMe2)Ni(Ar)I are high-spin and less stable. Further, (tBubpyMe2)Ni(Ar)I captures primary and benzylic alkyl radicals more slowly than (tBubpy)Ni(Ar)I, consistent with the lower activity of the former in catalysis. Our findings will assist in the design of tailor-made ligands for Ni-catalyzed transformations.

Robust and efficient transfer hydrogenation of carbonyl compounds catalyzed by NN-Mn(I) complexes

A series of manganese(I) carbonyl complexes bearing structurally related NN- and NNN-chelating ligands have been synthesized and assessed as catalysts for transfer hydrogenation (TH). Notably, the NN-systems based on N-R functionalized 5,6,7,8-tetrahydroquinoline-8-amines, proved the most effective in the manganese-promoted conversion of acetophenone to 1-phenylethanol. In particular, the N-isopropyl derivative, Mn1, when conducted in combination with t-BuONa, was the standout performer mediating not only the reduction of acetophenone but also a range of carbonyl substrates including (hetero)aromatic-, aliphatic- and cycloalkyl-containing ketones and aldehydes with especially high values of TON (up to 17 200; TOF of 3550 h-1). These findings, obtained through a systematic variation of the N-R group of the NN ligand, are consistent with an outer-sphere mechanism for the hydrogen transfer. As a more general point, this Mn-based catalytic TH protocol offers an attractive and sustainable alternative for producing alcoholic products from carbonyl substrates.

Spin-state crossover in photo-catalyzed nitrile dihydroboration via Mn-thiolate cooperation

The role of S-donors in ligand-assisted catalysis using first-row metals has not been broadly investigated. Herein is described a combined experimental and computational mechanistic study of the dihydroboration of nitriles with pinacolborane (HBpin) catalyzed by the Mn(i) complex, Mn(κ3-SMeNS)(CO)3, that features thioether, imine, and thiolate donors. Mechanistic studies revealed that catalysis requires the presence of UV light to enter and remain in the catalytic cycle and evidence is presented for loss of two CO ligands. Stoichiometric reactions showed that HBpin reduces the imine N[double bond, length as m-dash]C of the ligand backbone in the absence of nitrile, forming an inactive off-cycle by-product. DFT calculations showed that the bifunctional thiolate donor, coordinative flexibility of the SMeNS ligand, and access to an open-shell intermediate are all crucuial to accessing low-energy intermediates during catalysis.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

Threefold reactivity of a COF-embedded rhenium catalyst: reductive etherification, oxidative esterification or transfer hydrogenation

The reactivity of the novel Re(i) catalyst [Re(C12Anth-py2)(CO)3Br] is modulated by its interactions with the covalent organic framework (COF) TFB-BD.

Same ligand, three first-row metals: comparing M-amido bifunctional reactivity (Mn, Fe, Co)

The bifunctional reactivity of three metal SNS (bis)amido complexes was computationally assessed by comparing the nucleophilicity of the M-N_amido donor (Mn, Fe, Co). Hirshfeld charges identified the Mn-N_amido donor as most nucleophilic and Fe as most electrophilic metal. Reaction energy profiles of a model bifunctional H₂ activation showed Mn with the lowest reaction barrier (17 kcal mol^-1), followed by Fe and Co (21 and 29 kcal mol^-1).

Advancements in multifunctional manganese complexes for catalytic hydrogen transfer reactions

Catalytic hydrogen transfer reactions have enormous academic and industrial applications for the production of diverse molecular scaffolds. Over the past few decades, precious late transition-metal catalysts were employed for these reactions. The early transition metals have recently gained much attention due to their lower cost, less toxicity, and overall sustainability. In this regard, manganese, which is the third most abundant transition metal in the Earth's crust, has emerged as a viable alternative. However, the key to the success of such manganese-based complexes lies in the multifunctional ligand design and choice of appropriate ancillary ligands, which helps them mimic and, even in some cases, supersede noble metals' activities. The metal-ligand bifunctionality, achieved via deprotonation of the acidic C-H or N-H bonds, is one of the powerful strategies employed for this purpose. Alongside, the ligand hemilability in which a weakly chelating group tunes in between the coordinated and uncoordinated stages could effectively stabilize the reactive intermediates, thereby facilitating substrate activation and catalysis. Redox non-innocent ligands acting as an electron sink, thereby helping the metal center in steps gaining or losing electrons, and non-classical metal-ligand cooperativity has also played a significant role in the ligand design for manganese catalysis. The strategies were not only employed for the chemoselective hydrogenation of different reducible functionalities but also for the C-X (X = C/N) coupling reactions via HT and downstream cascade processes. This article features multifunctional ligand-based manganese complexes, highlighting the importance of ligand design and choice of ancillary ligands for achieving the desired catalytic activity and selectivity for HT reactions. We have also discussed the detailed reaction pathways for metal complexes involving bifunctionality, hemilability, redox activity, and indirect metal-ligand cooperativity. The synthetic utilization of those complexes in different organic transformations has also been detailed.

Recent advances in the synthesis and reactivity of quinoxaline

Quinoxalines are observed in several bioactive molecules and have been widely employed in designing molecules for DSSC's, optoelectronics, and sensing applications. Therefore, developing newer synthetic routes as well as novel ways for their functionalization is apparent.

Synthesis of Tetrahydroquinolines via Borrowing Hydrogen Methodology Using a Manganese PN3 Pincer Catalyst

A straightforward and selective synthesis of 1,2,3,4-tetrahydroquinolines starting from 2-aminobenzyl alcohols and simple secondary alcohols is reported. This one-pot cascade reaction is based on the borrowing hydrogen methodology promoted by a manganese(I) PN³ pincer complex. The reaction selectively leads to 1,2,3,4-tetrahydroquinolines thanks to a targeted choice of base. This strategy provides an atom-efficient pathway with water as the only byproduct. In addition, no further reducing agents are required.

Proton-responsive naphthyridinone-based RuII complexes and their reactivity with water and alcohols

We report the synthesis and reactivity of RuII complexes with a new naphthyridinone-substituted phosphine ligand, 7-(diisopropylphosphinomethyl)-1,8-naphthyridin-2(1H)-one (L-H), which contains two reactive sites that can potentially be deprotonated by a strong base: an NH proton of naphthyridinone and a methylene arm attached to the phosphine. In the absence of a base, the stable bis-ligated complex Ru(L-H)2Cl2 (1) containing two NH groups in the secondary coordination sphere is formed. Upon further reaction with a base, a doubly deprotonated, dimeric complex is obtained, [Ru2(L*-H)2(L)2] (2), in which two of the four ligands undergo deprotonation at the NH (L), while the other two ligands are deprotonated at the methylene groups (L*-H) as confirmed by an X-ray diffraction study; intramolecular hydrogen bonding is present between the NH group of one ligand and an O-atom of another ligand in the dimeric structure, which stabilizes the observed geometry of the complex. Complex 2 reacts with protic solvents such as water or methanol generating aqua Ru(L)2(OH2)2 (3) or methanol complexes Ru(L)2(MeOH)2 (4), respectively, both exhibiting intramolecular H-bonded patterns with surrounding ligands at least in the solid state. These complexes react with benzyl alcohols to give aldehydes via base-free acceptorless dehydrogenation.

Synthetic Strategies, Reactivity and Applications of 1,5-Naphthyridines

This review covers the synthesis and reactivity of 1,5-naphthyridine derivatives published in the last 18 years. These heterocycles present a significant importance in the field of medicinal chemistry because many of them exhibit a great variety of biological activities. First, the published strategies related to the synthesis of 1,5-naphthyridines are presented followed by the reactivity of these compounds with electrophilic or nucleophilic reagents, in oxidations, reductions, cross-coupling reactions, modification of side chains or formation of metal complexes. Finally, some properties and applications of these heterocycles studied during this period are examined.

The origin of different driving forces between O–H/N–H functional groups in metal ligand cooperation: mechanistic insight into Mn(i) catalysed transfer hydrogenation

The origin of different catalytic activity between two structurally similar Lewis basic bifunctional catalysts.

Strategies and mechanisms of metal–ligand cooperativity in first-row transition metal complex catalysts

The use of metal–ligand cooperation (MLC) by transition metal bifunctional catalysts has emerged at the forefront of homogeneous catalysis science.

Unmasking the Ligand Effect in Manganese-Catalyzed Hydrogenation: Mechanistic Insight and Catalytic Application

Manganese-catalyzed hydrogenation reactions have attracted broad interest since the first report in 2016. Among the reported catalytic systems, Mn catalysts supported by tridentate PNP- and NNP-pincer ligands have most commonly been used. For example, a number of PNP-Mn pincer catalysts have been reported for the hydrogenation of aldehydes, aldimines, ketones, nitriles, and esters. Furthermore, various NNP-Mn pincer catalysts have been shown to be active in the hydrogenation of less-reactive substrates such as amides, carbonates, carbamates, and urea derivations. These observations indicated that Mn catalysts supported by NNP-pincer ligands exhibit higher reactivity in hydrogenation reactions than their PNP counterparts. Such a ligand effect in Mn-catalyzed hydrogenation reactions has yet to be confirmed. Herein, we investigated the origin and applicability of this ligand effect. A combination of experimental and theoretical investigations showed that NNP-pincer ligands on the Mn complexes were more electron-rich and less sterically hindered than their PNP counterparts, leading to higher reactivity in a series of Mn-catalyzed hydrogenation reactions. Inspired by the ligand effect on Mn-catalyzed hydrogenations, we developed the first Mn-catalyzed hydrogenation of N-heterocycles. Specifically, NNP-Mn pincer catalysts hydrogenated a series of N-heterocycles (32 examples) with up to 99% yields, and the corresponding PNP-Mn pincer catalysts afforded low reactivity under the same conditions. This verified that such a ligand effect is generally applicable in hydrogenation reactions of both carbonyl and noncarbonyl substrates based on Mn catalysis.

Mechanistic Complexity of Asymmetric Transfer Hydrogenation with Simple Mn-Diamine Catalysts

The catalytic asymmetric transfer hydrogenation (ATH) of ketones is a powerful methodology for the practical and efficient installation of chiral centers. Herein, we describe the synthesis, characterization, and catalytic application of a series of manganese complexes bearing simple chiral diamine ligands. We performed an extensive experimental and computational mechanistic study and present the first detailed experimental kinetic study of Mn-catalyzed ATH. We demonstrate that conventional mechanistic approaches toward catalyst optimization fail and how apparently different precatalysts lead to identical intermediates and thus catalytic performance. Ultimately, the Mn-N,N complexes under study enable quantitative ATH of acetophenones to the corresponding chiral alcohols with 75-87% ee.