Phosphine Ligand‐Free Ruthenium Complexes as Efficient Catalysts for the Synthesis of Quinolines and Pyridines by Acceptorless Dehydrogenative Coupling Reactions

An NNN Pd(II) pincer complex with 1,1-diaminoazine: a versatile catalyst for acceptorless dehydrogenative coupling reactions

An azine-based, non-palindromic, neutral NNN-pincer ligand was synthesised in a single step with an yield of 85%. The palladation of the ligand, using Pd(OAc)2, was performed in acetonitrile at room temperature to obtain the pincer complex in 88% yield through a simple, cost-effective, and straightforward synthetic procedure. The structure of the complex was confirmed by 1H NMR, 13C NMR, FT-IR, and mass spectrometry. The variable temperature NMR spectra revealed the stability of the complex even at higher temperatures, a characteristic feature of pincer complexes. The generated complex proved to be a versatile catalyst for Acceptorless Dehydrogenative Coupling (ADC) to synthesize N-heterocycles: (i) 1,2-disubstituted benzimidazoles, (ii) 2-phenylquinolines, (iii) 2-phenylquinoxalines and (iv) 2-phenylquinazolinones. Since the side products of the reactions are H2O and H2 gas, the catalysis can be considered as a green catalytic process. Quantum chemical calculations indicated the participation of a possible nitrene-imide conversion process during the Metal-Ligand Cooperation (MLC) in ADC reactions.

Iron-Catalyzed One-Pot Cascade Reactions of Oximes with Inactivated Saturated Ketones: Entry to Highly Substituted Pyridines

An iron-catalyzed oxidative [3 + 3] annulation of oxime esters with inactivated saturated ketones is described. This cascade strategy allows one-step rapid synthesis of various structurally important pyridines through an oxidative dehydrogenation/annulation/oxidative aromatization sequence via direct α,β-dehydrogenation of simple saturated ketones followed by annulation with oximes. This method shows good functional group tolerance, readily accessible starting materials, a wide substrate scope, high chemoselectivity, and no need for extra stoichiometric oxidant and is also applicable to the late-stage functionalization of natural products.

A Phosphine-Oxide Cobalt(II) Complex and Its Catalytic Activity Studies toward Alcohol Dehydrogenation Triggered Direct Synthesis of Imines and Quinolines

Herein, a new pincer-like amino phosphine donor ligand, H2L1, and its phosphine-oxide analog, H2L2, were synthesized. Subsequently, cobalt(II) complexes 1 and 2 were synthesized by the reaction of anhydrous Co(II)Cl2 with ligands H2L1 and H2L2, respectively. The ligands and complexes were fully characterized by various physicochemical and spectroscopic characterization techniques. Finally, the identity of the complexes 1 and 2 was confirmed by single crystal X-ray structure determination. The phosphine ligand containing complex 1 was converted to the phosphine oxide ligand containing complex 2 in air in acetonitrile solution. Both complexes 1 and 2 were investigated as precatalysts for alcohol dehydrogenation-triggered synthesis of imines in air. The phosphine-oxide complex 2 was more efficient than the phosphine complex 1. A wide array of alcohols and amines were successfully reacted in a mild condition to result in imines in good to excellent yields. Precatalyst 2 was also highly efficient for the synthesis of varieties of quinolines in air. As H2L2 in 2 has side arms that can be deprotonated, we investigated complex 2 for its base (KOtBu) promoted deprotonation events by various spectroscopic studies and DFT calculations. These studies have shown that mono deprotonation of the amine side arm attached to the pyridine is quite feasible, and deprotonation of complex 2 leads to a dearomatized pyridyl ring containing complex 2a. The mechanistic investigations of the catalytic reaction, by a combination of experimental and computational studies, have suggested that the dearomatized complex, 2a acted as an active catalyst. The reaction proceeded through the hydride transfer pathway. The activation barrier of this step was calculated to be 26.5 kcal/mol, which is quite consistent with the experimental reaction temperature under aerobic conditions. Although various pincer-like complexes are explored for such reactions, phosphine oxide ligand-containing complexes are still unexplored.

Schiff-base Polymer Immobilized Ruthenium for Efficient Catalytic Cross-coupling of Secondary Alcohols with 2-amino- and γ-aminobenzyl Alcohols to Give Quinolines and Pyridines

A Schiff-base porous polymer has been impregnated with ruthenium trichloride for acceptor-free dehydrogenation coupling (ADC) of secondary alcohols with γ-amino- and 2-aminobenzyl alcohols to give pyridines and quinolines. This heterogenous catalyst exhibited high catalytic efficiency over repeated cycles with wide functional group tolerance.

Titanium-Catalyzed Selective N-Alkylation of Amines with Alcohols via Borrowing Hydrogen Methodology

The N-alkylation of amines with alcohols using earth-abundant and nonprecious metal catalysts has gained considerable attention in the pharmaceutical industry. We described titanium-catalyzed synthetic protocol for N-alkylation of amines with alcohols via borrowing hydrogen or hydrogen autotransfer reactions. The methodology enables the selective monoalkylation of various substituted (hetero)aromatic amines in good to excellent yields (up to 97% yield). The importance of the protocol was further demonstrated by the applicability of earth-abundant metal catalysis and the synthesis of 32 N-alkylated amines. The work allows the utilization of titanium-based catalysts for various reactions to expand the nature blueprint in catalysis.

Arene Ruthenium(II)-Catalyzed Sustainable Synthesis of 2,4-Disubstituted Quinazolines via Acceptorless Dual Dehydrogenative Coupling of Alcohols

We demonstrate an efficient and sustainable strategy for the direct synthesis of 2,4-disubstituted quinazolines by arene Ru(II)benzhydrazone complex via the eco-friendly sequential acceptorless dehydrogenative coupling of 2-aminobenzhydrol derivatives and benzyl alcohols for the first time. The new ruthenium(II) complex of the general formula [(η6-p-cymene)Ru(L1)Cl] (L1-acenaphthenequinone hydrazone) has been synthesized and characterized by analytical, spectroscopic, and single-crystal X-ray diffraction techniques. A broad spectrum of 2,4-disubstituted quinazolines have been successfully derived (25 examples) from 2-aminobenzhydrol derivatives with various benzyl alcohols using 1 mol % of catalyst loading in the presence of NH4OAc. The present protocol is highly selective and produces a maximum yield of 95% under mild reaction conditions. The different reaction intermediates detected through control experiments such as aldehyde, 2-aminobenzophenone, benzylidene(amino)phenylmethanone, and 1,2-dihydroquinazoline are isolated and authenticated by the NMR study. Gratifyingly, the coupling reaction is a simple and atom economic with the release of water and hydrogen gas as the only byproducts. A gram-scale synthesis of 2-(4-methoxyphenyl)-4-phenylquinazoline illustrates the synthetic utility of the present protocol.

Photoswitchable Azoheteroarene-Based Chelating Ligands: Light Modulation of Properties, Aqueous Solubility and Catalysis

We report the design and synthesis of eight photoswitchable phenylazopyridine- and phenylazopyrazole-based molecular systems as chelation-type light-controllable ligands. Besides the studies on fundamental photoisomerization behaviour, the ligands were also screened for light-tuneable properties such as photochromism, phase transition, and solubility, especially in the aqueous medium. This investigation demonstrates how the modulation of aqueous solubility can be achieved through photoisomerization and can further be utilized towards controlling the amount of catalytically active Cu(I) species in the aqueous conditions. Through this approach, light control over the catalytic activity was achieved for Cu-catalyzed azide-alkyne cycloaddition (CuAAC) reactions, along with a partial recovery of the catalytically active species.

Zn(II)-Catalyzed Multicomponent Sustainable Synthesis of Pyridines in Air

Herein, we report a Zn(II)-catalyzed solvent-free sustainable synthesis of tri- and tetra-substituted pyridines using alcohols as the primary feedstock and NH₄OAc as the nitrogen source. Using a well-defined air-stable Zn(II)-catalyst, 1a, featuring a redox-active tridentate azo-aromatic pincer, 2-((4-chlorophenyl)diazenyl)-1,10-phenanthroline (L^a), a wide variety of unsymmetrical 2,4,6-substituted pyridines were prepared by three-component coupling of primary and secondary alcohols with NH₄OAc. Catalyst 1a is equally compatible with the four-component coupling. Unsymmetrical 2,4,6-substituted pyridines were also prepared via a four-component coupling of a primary alcohol with two different secondary alcohols and NH₄OAc. A series of tetra-substituted pyridines were prepared up to 67% yield by coupling primary and secondary alcohols with 1-phenylpropan-1-one or 1,2-diphenylethan-1-one and NH₄OAc. The 1a-catalyzed reactions also proceeded efficiently upon replacing the secondary alcohols with the corresponding ketones, producing the desired tri- and tetra-substituted pyridines in higher yields in a shorter reaction time. A few control experiments were performed to unveil the mechanistic aspects, which indicates that the active participation of the aryl-azo ligand during catalysis enables the Zn(II)-complex to act as an efficient catalyst for the present multicomponent reactions. Aerial oxygen acts as an oxidant during the Zn(II)-catalyzed dehydrogenation of alcohols, producing H₂O and H₂O₂ as byproducts.

Cyclometalated iridium complexes-catalyzed acceptorless dehydrogenative coupling reaction: construction of quinoline derivatives and evaluation of their antimicrobial activities

The acceptorless dehydrogenative coupling (ADC) reaction is an efficient method for synthesizing quinoline and its derivatives. In this paper, various substituted quinolines were synthesized from 2-aminobenzyl alcohols and aryl/heteroaryl/alkyl secondary alcohols in one pot via a cyclometalated iridium-catalyzed ADC reaction. This method has some advantages, such as easy availability of raw materials, mild reaction conditions, wide range of substrates, and environmental friendliness which conforms to the principles of green chemistry. Furthermore, a gram-scale experiment with low catalyst loading offers the potential to access the aryl/heteroaryl quinolones in suitable amounts. In addition, the antibacterial and antifungal activities of the synthesized quinolines were evaluated in vitro, and the experimental results showed that the antibacterial activities of compounds 3ab, 3ad, and 3ah against Gram-positive bacteria and compound 3ck against C. albicans were better than the reference drug norfloxacin.

Recent advances in C/N-alkylation with alcohols through hydride transfer strategies

This review highlights the most recent reports in three powerful and ever-growing fields of borrowing hydrogen, acceptorless dehydrogenative coupling, and base-mediated hydride transfer strategies; which pave the way for generating reactive intermediates via shuttling hydrogen (or hydride) between starting materials without any need for an external hydrogen source to easily construct more complex structures. There is a thorough focus on diversifying the utility of alcohols for C/N-alkylation leading to the synthesis of branched ketones, alcohols, amines, indols, and 6-membered nitrogen-containing heterocycles such as pyridines and pyrimidines, various transformations with the focus on C-C and C-N bond-forming reactions via metal-based catalysis or metal-free approaches in this context to give a global overview in this area.

Dehydrogenative Synthesis of Quinolines and Quinazolines via Ligand-Free Cobalt-Catalyzed Cyclization of 2-Aminoaryl Alcohols with Ketones or Nitriles

We present a convenient and efficient protocol to synthesize quinolines and quinazolines in one pot under mild conditions. A variety of substituted quinolines were synthesized in good to excellent yields (up to 97% yield) from the dehydrogenative cyclizations of 2-aminoaryl alcohols and ketones catalyzed by readily available Co(OAc)₂·4H₂O. This cobalt catalytic system also showed high activity in the reactions of 2-aminobenzyl alcohols with nitriles, affording various quinazoline derivatives (up to 95% yield). The present protocol offers an environmentally benign approach for the synthesis of N-heterocycles by employing an earth-abundant cobalt salt under ligand-free conditions.

Well-Defined Phosphine-Free Manganese(II)-Complex-Catalyzed Synthesis of Quinolines, Pyrroles, and Pyridines

Herein, we report a simple, phosphine-free, and inexpensive catalytic system based on a manganese(II) complex for synthesizing different important N-heterocycles such as quinolines, pyrroles, and pyridines from amino alcohols and ketones. Several control experiments, kinetic studies, and DFT calculations were carried out to support the plausible reaction mechanism. We also detected two potential intermediates in the catalytic cycle using ESI-MS analysis. Based on these studies, a metal-ligand cooperative mechanism was proposed.

Iron-catalysed quinoline synthesis via acceptorless dehydrogenative coupling

An iron-catalysed atom-economical and straightforward methodology for the synthesis of quinolines from α-2-aminoaryl alcohols and secondary alcohols is presented.

Ruthenium pincer complex catalyzed efficient synthesis of quinoline, 2-styrylquinoline and quinazoline derivatives via acceptorless dehydrogenative coupling reactions

The synthesis of N-heterocycles has been considered an emerging area of chemical research due to their extensive utilization in pharmaceuticals, materials science, and natural product synthesis.

Visible-Light-Mediated Oxidative Cyclization of 2-Aminobenzyl Alcohols and Secondary Alcohols Enabled by an Organic Photocatalyst

This paper describes a visible-light-mediated oxidative cyclization of 2-aminobenzyl alcohols and secondary alcohols to produce quinolines at room temperature. This photocatalytic method employed anthraquinone as an organic small-molecule catalyst and DMSO as an oxidant. According to this present procedure, a series of quinolines were prepared in satisfactory yields.

Designed pincer ligand supported Co(II)-based catalysts for dehydrogenative activation of alcohols: Studies on N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines

Base-metal catalysts Co1, Co2 and Co3 were synthesized from designed pincer ligands L1, L2 and L3 having NNN donor atoms respectively. Co1, Co2 and Co3 were characterized by IR, UV-Vis. and ESI-MS spectroscopic studies. Single crystal X-ray diffraction studies were investigated to authenticate the molecular structures of Co1 and Co3. Catalysts Co1, Co2 and Co3 were utilized to study the dehydrogenative activation of alcohols for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines. Under optimized reaction conditions, a broad range of substrates including alcohols, anilines and ketones were exploited. A series of control experiments for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines were examined to understand the reaction pathway. ESI-MS spectral studies were investigated to characterize cobalt-alkoxide and cobalt-hydride intermediates. Reduction of styrene by evolved hydrogen gas during the reaction was investigated to authenticate the dehydrogenative nature of the catalysts. Probable reaction pathways were proposed for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines on the basis of control experiments and detection of reaction intermediates.

Direct synthesis of ring-fused quinolines and pyridines catalyzed by NNHY-ligated manganese complexes (Y = NR2 or SR)

A robust NNS-manganese(i) complex has been developed that can efficiently catalyze the dehydrogenation coupling of γ-amino alcohols with ketones or secondary alcohols in a one-step synthesis of quinolines and pyridines with high yields.

Recent advances in sustainable synthesis of N-heterocycles following acceptorless dehydrogenative coupling protocol using alcohols

In this review, we have summarized various aspects of homogeneous and heterogeneously catalyzed recent advancements in the synthesis of heterocycles following the ADC approach.

Efficient α-Alkylation of Arylacetonitriles with Secondary Alcohols Catalyzed by a Phosphine-Free Air-Stable Iridium(III) Complex

A well-defined and readily available air-stable dimeric iridium(III) complex catalyzed α-alkylation of arylacetonitriles using secondary alcohols with the liberation of water as the only byproduct is reported. The α-alkylations were efficiently performed at 120 °C under solvent-free conditions with very low (0.1-0.01 mol %) catalyst loading. Various secondary alcohols including cyclic and acyclic alcohols and a wide variety of arylacetonitriles bearing different functional groups were converted into the corresponding α-alkylated products in good yields. Mechanistic study revealed that the reaction proceeds via alcohol activation by metal-ligand cooperation with the formation of reactive iridium-hydride species.

Synthesis of Tetrahydroquinolines via Borrowing Hydrogen Methodology Using a Manganese PN3 Pincer Catalyst

A straightforward and selective synthesis of 1,2,3,4-tetrahydroquinolines starting from 2-aminobenzyl alcohols and simple secondary alcohols is reported. This one-pot cascade reaction is based on the borrowing hydrogen methodology promoted by a manganese(I) PN³ pincer complex. The reaction selectively leads to 1,2,3,4-tetrahydroquinolines thanks to a targeted choice of base. This strategy provides an atom-efficient pathway with water as the only byproduct. In addition, no further reducing agents are required.

Acceptorless dehydrogenative coupling with Ru-based catalysts for the synthesis of N-heteroaromatic compounds

A summary of recently developed ruthenium catalysts for the synthesis of N-heteroaromatic compounds via acceptorless dehydrogenative coupling (ADC) and the related auto-transfer-hydrogenative (ATH) reaction.

Syntheses of Pyrroles, Pyridines, and Ketonitriles via Catalytic Carbopalladation of Dinitriles

The first example of the Pd-catalyzed addition of organoboron reagents to dinitriles, as an efficient means of preparing 2,5-diarylpyrroles and 2,6-diarylpyridines, has been discussed here. Furthermore, the highly selective carbopalladation of dinitriles with organoboron reagents to give long-chain ketonitriles has been developed as well. Based on the broad scope of substrates, excellent functional group tolerance, and use of commercially available substrates, the Pd-catalyzed addition reaction of arylboronic acid and dinitriles is expected to be significant in future synthetic procedures.