Cubic Palladium Nanorattles with Solid Octahedron Gold Core for Catalysis and Alkaline Membrane Fuel Cell Applications

The Rise of Structurally Anisotropic Plasmonic Janus Gold Nanostars

Nanostructures intrinsically possessing two different structural or functional features, often called Janus nanoparticles, are emerging as a potential material for sensing, catalysis, and biomedical applications. Herein, we report the synthesis of plasmonic gold Janus nanostars (NSs) possessing a smooth concave pentagonal morphology with sharp tips and edges on one side and, contrastingly, a crumbled morphology on the other. The methodology reported herein for their synthesis - a single-step growth reaction - is different from any other Janus nanoparticle preparation involving either template-assisted growth or a masking technique. Interestingly, the coexistence of lower- and higher-index facets was found in these Janus NSs. The general paradigm for synthesizing gold Janus NSs was investigated by understanding the kinetic control mechanism with the combinatorial effect of all the reagents responsible for the structure. The optical properties of the Janus NSs were realized by corelating their extinction spectra with the simulated data. The size-dependent surface-enhanced Raman scattering (SERS) activity of these Janus NSs was studied with 1,4-BDT as the model analyte. Finite-difference time-domain simulations for differently sized particles revealed the distribution of electromagnetic hot-spots over the particles resulting in enhancement of the SERS signal in a size-dependent manner.

Plasmonic gold dogbone nanorattles sniff out trace molecules through surface enhanced Raman scattering

In this study, a highly sensitive and efficient surface-enhanced Raman spectroscopy (SERS) substrate was developed using Au dogbone nanorattles (Au-DBNRTs) deposited on a 3D wrinkled polymeric heat shrink film. The plasmonic structures of Au-DBNRTs, which possess a solid gold dogbone-shaped core and a thin, porous gold shell, and Au nanorod nanorattles (Au-NRNRTs), which have a rod-shaped core, were synthesized and their SERS performance was evaluated. Au-DBNRTs exhibited better Raman signal enhancement. The substrate was used to detect the pesticide thiabendazole with a limit of detection of up to 10-8 M. The unique optical properties and geometry of the Au-DBNRT nanoparticles, which have portruding corners in the vicinity of the metal shell, along with the shrinkage of the film after heat treatment, led to the creation of a 3D surface morphology, resulting in the generation of plasmonic electromagnetic hot spots. The fabricated substrate achieved an enhancement factor of 2.77 × 1010 for BDT, and the detection limit was 10-13 M. The current work offers a simple, cost-effective, and sensitive SERS substrate design that has great potential for sensing and detecting trace analytes.

Pt/C-TiO2 as Oxygen Reduction Electrocatalysts against Sulfur Poisoning

Proton exchange membrane (PEM) fuel cells using Pt-based materials as electrocatalysts have achieved a decent performance, represented by the launched Toyota Mirai vehicle. The ideal PEM fuel cells consume stored pure hydrogen and air. However, SO2, as a primary air contaminant, may be fed along with air at the cathode, leading to Pt site deactivation. Therefore, it is important to improve the SO2 tolerance of catalysts for the stability of the oxygen reduction reaction (ORR). In this work, we develop the Pt/C-TiO2 catalyst against SO2 poisoning during ORR. Impressively, the hybrid Pt/C-TiO2 catalyst with 20 mass % TiO2 shows the best ORR and anti-toxic performance: the kinetic current density of ORR is 20.5% higher and the degradation rate after poisoning is 50% lower than Pt/C. The interaction between Pt and TiO2 as well as the abundant hydroxyl groups on the surface of TiO2 are both revealed to account for the accelerated removal of poisonous SO2 on Pt surfaces.

Electronic and lattice strain dual tailoring for boosting Pd electrocatalysis in oxygen reduction reaction

Deliberately optimizing the d-band position of an active component via electronic and lattice strain tuning is an effective way to boost its catalytic performance. We herein demonstrate this concept by constructing core-shell Au@NiPd nanoparticles with NiPd alloy shells of only three atomic layers through combining an Au catalysis with the galvanic replacement reaction. The Au core with larger electronegativity modulates the Pd electronic configuration, while the Ni atoms alloyed in the ultrathin shells neutralize the lattice stretching in Pd shells exerted by Au cores, equipping the active Pd metal with a favorable d-band position for electrochemical oxygen reduction reaction in an alkaline medium, for which core-shell Au@NiPd nanoparticles with a Ni/Pd atomic ratio of 3/7 exhibit a half-wave potential of 0.92 V, specific activity of 3.7 mA cm^-2, and mass activity of 0.65 A mg^-1 at 0.9 V, much better than most of the recently reported Pd-even Pt-based electrocatalysts.

Shape- and Size-Controlled Palladium Nanocrystals and Their Electrocatalytic Properties in the Oxidation of Ethanol

Pd nanoparticles (PdNPs) were synthesized in an aqueous environment via the reduction of K₂PdCl₄ by a surfactant under a high temperature. Highly monodisperse spherical PdNPs and multi-pod PdNPs with a controlled size ranging from 18 to 50 nm were prepared in high yields by varying the concentration of cetyltrimethylammonium chloride. The structural and optical properties of the synthesized Pd NPs were characterized by transmission electron microscopy, X-ray diffraction and UV-vis spectroscopy. The spherical and multi-pod PdNPs exhibited catalytic properties that were unique to their size and shape and presented efficient electrocatalytic activities toward the ethanol oxidation reaction.

Atomic-Level Manipulations in Oxides and Alloys for Electrocatalysis of Oxygen Evolution and Reduction

As chemical reactions and charge-transfer simultaneously occur on the catalyst surface during electrocatalysis, numerous studies have been carried out to attain an in-depth understanding on the correlation among the surface structure and composition, the electrical transport, and the overall catalytic activity. Compared with other catalysis reactions, a relatively larger activation barrier for oxygen evolution/reduction reactions (OER/ORR), where multiple electron transfers are involved, is noted. Many works over the past decade thus have been focused on the atomic-scale control of the surface structure and the precise identification of surface composition change in catalyst materials to achieve better conversion efficiency. In particular, recent advances in various analytical tools have enabled noteworthy findings of unexpected catalytic features at atomic resolution, providing significant insights toward reducing the activation barriers and subsequently improving the catalytic performance. In addition to summarizing important surface issues, including lattice defects, related to the OER and ORR in this Review, we present the current status and discuss future perspectives of oxide- and alloy-based catalysts in terms of atomic-scale observation and manipulation.