NiFe Alloyed Nanoparticles Encapsulated in Nitrogen Doped Carbon Nanotubes for Bifunctional Electrocatalysis Toward Rechargeable Zn‐Air Batteries

CoNi Alloys Encapsulated in N-Doped Carbon Nanotubes for Stabilizing Oxygen Electrocatalysis in Zinc-Air Battery

Alloy-based catalysts with high corrosion resistance and less self-aggregation are essential for oxygen reduction/evolution reactions (ORR/OER). Here, via an in situ growth strategy, NiCo alloy-inserted nitrogen-doped carbon nanotubes were assembled on a three-dimensional hollow nanosphere (NiCo@NCNTs/HN) using dicyandiamide. NiCo@NCNTs/HN exhibited better ORR activity (half-wave potential (E_1/2) of 0.87 V) and stability (E_1/2 shift of only -13 mV after 5000 cycles) than commercial Pt/C. NiCo@NCNTs/HN displayed a lower OER overpotential (330 mV) than RuO₂ (390 mV). The NiCo@NCNTs/HN-assembled zinc-air battery exhibited high specific-capacity (847.01 mA h g^-1) and cycling-stability (291 h). Synergies between NiCo alloys and NCNTs facilitated the charge transfer to promote 4e^- ORR/OER kinetics. The carbon skeleton inhibited the corrosion of NiCo alloys from surface to subsurface, while inner cavities of CNTs confined particle growth and the aggregation of NiCo alloys to stabilize bifunctional activity. This provides a viable strategy for the design of alloy-based catalysts with confined grain-size and good structural/catalytic stabilities in oxygen electrocatalysis.

Hybrid Carbon Sphere Chain-MnO2 Nanorods as Bifunctional Oxygen Electrocatalysts for Rechargeable Zinc-Air Batteries

It is now recognized that the development of self-supported and efficient bifunctional air cathodes via the direct growth of earth-abundant catalysts onto the surface of the conductive collector would be a cutting-edge strategy to reduce interfacial resistance, enhance the mechanical tenure, and reduce the final weight and cost of manufacturing of rechargeable Zn-air batteries (ZABs). This work reports an innovative self-supported precious metal-free electrode, comprising carbon sphere chains (CSCs) directly grown onto a carbon paper (CP) substrate, wherein the CSCs have a functionalized surface bearing carbon nanobud defects, oxygen functional groups, and high-density MnO₂ hierarchical nanorods (NRs), uniformly coating the surface of CSCs. Not only is the metal-free functionalized CSC catalyst functional for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) but its combination with MnO₂ NRs impressively enhances the ORR/OER activities. A homemade ZAB assembled with functionalized CSC/MnO₂ air cathode can successfully power a timer for a period of 17 days with no voltage loss, whereas two series-connected ZABs can light up 39 red light-emitting diode (LED) bulbs. The self-supported and earth-abundant-based CSC/MnO₂ materials open up an opportunity for lightweight and cost-effective ZABs and metal-air batteries in general.

Metal-organic framework derived ultralow-loading platinum-copper catalyst: a highly active and durable bifunctional electrocatalyst for oxygen-reduction and evolution reactions

Electrocatalysts with high active oxygen reduction (ORR) and oxygen evolution reaction (OER) activities are key factors in renewable energy technologies. Unlike common strategies for adjusting the proportion of metal centers in a multi-metal organic framework (MOF), herein, we designed and synthesized bifunctional electrocatalysts using cetyltrimethylammonium bromide (CTAB)-capped ultra-low content platinum (Pt) (≤0.5 wt.% Pt) and copper (Cu) nanoparticles and doped on the surface of zinc-based MOF (Zn-MOF-74) and calcinated at 900 °C. According to the electrochemical activity, the Pt/Cu/NPC-900 exhibits superior catalytic activities towards both the ORR with the onset (E₀) and half-wave (E_1/2) potentials were 1.0 V and 0.89 V versus RHE, respectively, and OER (E_o = 1.48 V versus RHE and overpotential (η) = 0.265 V versus RHE) in an alkaline electrolyte at ambient temperature. Also, Pt/Cu/NPC-900 catalyzes through a 4^-electron process and exhibits superior stability. Such insightful findings, as well as a newly developed approach, provides rational design and synthesis of an economical and efficient strategy for bifunctional electrocatalyst development.

Intrinsic activity modulation and structural design of NiFe alloy catalysts for an efficient oxygen evolution reaction

NiFe alloy catalysts have received increasing attention due to their low cost, easy availability, and excellent oxygen evolution reaction (OER) catalytic activity. Although it is considered that the co-existence of Ni and Fe is essential for the high catalytic activity, the identification of active sites and the mechanism of OER in NiFe alloy catalysts have been controversial for a long time. This review focuses on the catalytic centers of NiFe alloys and the related mechanism in the alkaline water oxidation process from the perspective of crystal structure/composition modulation and structural design. Briefly, amorphous structures, metastable phases, heteroatom doping and in situ formation of oxyhydroxides are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted OER kinetics. Furthermore, the construction of dual-metal single atoms, specific nanostructures, carbon material supports and composite structures are introduced to increase the abundance of active sites and promote mass transportation. Finally, a perspective on the future development of NiFe alloy electrocatalysts is offered. The overall aim of this review is to shed light on the exploration of novel electrocatalysts in the field of energy.

Fe-Doping induced divergent growth of Ni–Fe alloy nanoparticles for enhancing the electrocatalytic oxygen reduction

Separate (111)- and (200)-faceted Ni–Fe nanoparticles were synthesized and their oxygen reduction reaction activity studied via density functional theory calculations and experiments.

Recent Progress on NiFe-Based Electrocatalysts for the Oxygen Evolution Reaction

The seriousness of the energy crisis and the environmental impact of global anthropogenic activities have led to an urgent need to develop efficient and green fuels. Hydrogen, as a promising alternative resource that is produced in an environmentally friendly and sustainable manner by a water splitting reaction, has attracted extensive attention in recent years. However, the large-scale application of water splitting devices is hindered predominantly by the sluggish oxygen evolution reaction (OER) at the anode. Therefore, the design and exploration of high-performing OER electrocatalysts is a critical objective. Considering their low prices, abundant reserves, and intrinsic activities, NiFe-based bimetal compounds are widely studied as excellent OER electrocatalysts. Moreover, recent progress on NiFe-based OER electrocatalysts in alkaline environments is comprehensively and systematically introduced through various catalyst families including NiFe-layered hydroxides, metal-organic frameworks, NiFe-based (oxy)hydroxides, NiFe-based oxides, NiFe alloys, and NiFe-based nonoxides. This review briefly introduces the advanced NiFe-based OER materials and their corresponding reaction mechanisms. Finally, the challenges inherent to and possible strategies for producing extraordinary NiFe-based electrocatalysts are discussed.

Heterostructure and Oxygen Vacancies Promote NiFe2 O4 /Ni3 S4 toward Oxygen Evolution Reaction and Zn-Air Batteries

Developing high-performance catalysts for oxygen evolution reaction (OER) is critical for the widespread applications of clean and sustainable energy through electrochemical devices such as zinc-air batteries and (photo)electrochemical water splitting. Constructing heterostructure and oxygen vacancies have demonstrated great promises to boost the OER performance. Herein, we report a facile strategy to fabricate hetero-structured NiFe₂ O₄ /Ni₃ S₄ nanorods, where NiFe₂ O₄ can be derived from Fe-based metal-organic frameworks (MOFs). The NiFe₂ O₄ /Ni₃ S₄ catalyst exhibited excellent OER performance, evidenced by an overpotential value of 357 mV at the current density of 20 mA cm^-2 , and a small Tafel slope of 87.46 mV dec^-1 in 1 M KOH, superior to the benchmark IrO₂ catalyst. Moreover, NiFe₂ O₄ /Ni₃ S₄ outperformed with regard to long-term durability for OER than IrO₂ . Such outstanding OER performance is mainly accounted by the interface between NiFe₂ O₄ and Ni₃ S₄ , and the presence of rich oxygen vacancies. When employed as air-cathode in zinc-air batteries, the NiFe₂ O₄ /Ni₃ S₄ decorated battery had a high round-trip efficiency of 62.1% at 10 h, and possessed long-term stability of >50 h. This study may pave the way for fabricating non-noble-metal-based cost-effective, efficient and durable electrocatalysts for OER, zinc-air batteries, and beyond.