Integrated, Selective, Simultaneous Multigas Sensing Based on Nondispersive Infrared Spectroscopy-Type Photoacoustic Spectroscopy

Most chemical sensing scenarios require the selective and simultaneous determination of the concentrations of multiple gas species. In order to enable large-scale monitoring, reliability, robustness, and the potential for integration and miniaturization are key parameters that next-generation sensing technologies must comply with. Due to their superior sensitivity and selectivity as compared to standard NDIR-type systems, photoacoustic NDIR-approaches offer a means for selective detection at much reduced system dimensions such that microintegration becomes feasible. This contribution presents an acoustic frequency multiplexing method to integrate sensing capabilities for the parallel analysis of multiple gases in a single device without loss in selectivity via sound frequency separation. The approach is demonstrated using mid-infrared light emitting diodes and a multigas photoacoustic detector to monitor some of the most important greenhouse gases: carbon dioxide and methane. The number of gas species the sensor concept is able to detect simultaneously can be expanded without increasing the size of the system or its complexity. Additionally, the results demonstrate that the integrated device features the same selectivity and sensitivity as the currently used single gas photoacoustic NDIR systems. Furthermore, the possibility of an extension to any number of gas species is argued.

On-Board Monitoring of SO2 Ship Emissions Using Resonant Photoacoustic Gas Detection in the UV Range

A photoacoustic gas detector for SO2 was developed for ship exhaust gas emission monitoring. The basic measurement setup is based on the absorption of electromagnetic radiation of SO2 at 285 nm wavelength. A commercially available ultraviolet (UV) light-emitting diode (LED) is used as the light source and a micro-electro-mechanical system (MEMS) microphone as the detector. In order to achieve the required detection limits in marine applications, a measuring cell which allows an acoustically resonant amplification of the photoacoustic signal was developed and characterized. A limit of detection of 1 ppm was achieved in lab conditions during continuous gas flow. Long-term measurements on a container ship demonstrated the application relevance of the developed system.

Photoacoustic-Based Gas Sensing: A Review

The use of the photoacoustic effect to gauge the concentration of gases is an attractive alternative in the realm of optical detection methods. Even though the effect has been applied for gas sensing for almost a century, its potential for ultra-sensitive and miniaturized devices is still not fully explored. This review article revisits two fundamentally different setups commonly used to build photoacoustic-based gas sensors and presents some distinguished results in terms of sensitivity, ultra-low detection limits, and miniaturization. The review contrasts the two setups in terms of the respective possibilities to tune the selectivity, sensitivity, and potential for miniaturization.

Investigating flexible feeding effects on the biogas quality in full-scale anaerobic digestion by high resolution, photoacoustic-based NDIR sensing

In future energy systems based on renewable energies, biogas plants can make a significant contribution to stabilizing the electricity grids. However, this requires load-flexible and demand-oriented electricity production by means of flexible feed management. However, these flexible feeding strategies using greatly oscillating, temporally varying high mass loads may lead to critical process failures of the anaerobic digestion process. Currently there is no online, high resolution gas quality measurement technique to detect and prevent biological process failures available. In this contribution, we present a miniaturized, low-cost biogas quality measurement system providing data with high precision and high temporal resolution to overcome this technology gap. To highlight the capabilities of the system we have installed it using a bypass to the main biogas duct after hydrogen sulfide removal at a full-scale research biogas plant. During a three-month field trial, the effect of flexible feeding on the biogas quality has been monitored. The results demonstrate long-term stability of the sensor solution and reveal the effects of changing feeding frequency and composition on gas quantity and quality, which cannot be detected with commercially available state-of-the-art sensing systems.

A Wireless Gas Sensor Network to Monitor Indoor Environmental Quality in Schools

Schools are amongst the most densely occupied indoor areas and at the same time children and young adults are the most vulnerable group with respect to adverse health effects as a result of poor environmental conditions. Health, performance and well-being of pupils crucially depend on indoor environmental quality (IEQ) of which air quality and thermal comfort are central pillars. This makes the monitoring and control of environmental parameters in classes important. At the same time most school buildings do neither feature automated, intelligent heating, ventilation, and air conditioning (HVAC) systems nor suitable IEQ monitoring systems. In this contribution, we therefore investigate the capabilities of a novel wireless gas sensor network to determine carbon dioxide concentrations, along with temperature and humidity. The use of a photoacoustic detector enables the construction of long-term stable, miniaturized, LED-based non-dispersive infrared absorption spectrometers without the use of a reference channel. The data of the sensor nodes is transmitted via a Z-Wave protocol to a central gateway, which in turn sends the data to a web-based platform for online analysis. The results show that it is difficult to maintain adequate IEQ levels in class rooms even when ventilating frequently and that individual monitoring and control of rooms is necessary to combine energy savings and good IEQ.