Determination of the solubility of methyldopa in supercritical carbon dioxide for drug delivery applications: thermal analysis

The production of fine particles by green technology like supercritical carbon dioxide requires the assessment of substantial solubility data at high pressures. This study represents the first determination of the solubility of methyldopa in carbon dioxide at pressures and temperatures ranging from 12 to 30 MPa and from 313.2 to 343.2 K, respectively. The mole fractions were obtained under the aforementioned conditions and ranged from 0.805 × 10⁻5 to 11.345 × 10⁻5. Four empirical models (Chrastil, Bartle et al., Mendez-Santiago, & Teja, and Kumar-Johnston) and two equations of state (Peng-Robinson and Soave-Redlich-Kwong) were used to correlate drug solubility. The K-J model demonstrated the highest accuracy, with an AARD of 8.38% and a R2 value of 0.988. Furthermore, the enthalpy values for the drug in SC-CO₂ were estimated using the Chrastil and Bartle models, resulting in values of 34.35 and 56.87 kJ·mol⁻¹, respectively. The results demonstrate that the SRK more pronounced results than the PR model, with an AARD% of 23.03 and a R2 value of 0.903 compared to 26.42 and 0.837. The article's conclusions provide a valuable reference for the application of green method in the production of fine particles of methyldopa.

Improving and measuring the solubility of favipiravir and montelukast in SC-CO2 with ethanol projecting their nanonization

Supercritical carbon dioxide (SC-CO2)-based approaches have become more popular in recent years as alternative methods for creating micro- or nanosized medicines. Particularly, high drug solubility is required in those techniques using SC-CO2 as a solvent. During the most recent pandemic years, favipiravir and montelukast were two of the most often prescribed medications for the treatment of COVID-19. In this study, ethanol at 1 and 3 mol% was utilized as a cosolvent to increase the solubility of both medicines in SC-CO2 by a static approach using a range of temperatures (308 to 338 K) and pressure (12 to 30 MPa) values. The experimentally determined solubilities of favipiravir and montelukast in SC-CO2 + 3 mol% ethanol showed solubility values up to 33.3 and 24.5 times higher than that obtained for these drugs with only SC-CO2. The highest values were achieved in the pressure of 12 MPa and temperature of 338 K. Last but not least, six density-based semi-empirical models with various adjustable parameters were used to perform the modeling of the solubility of favipiravir and montelukast.

Dissolution Improvement of Progesterone and Testosterone via Impregnation on Mesoporous Silica Using Supercritical Carbon Dioxide

Progesterone (PRG) and testosterone (TST) were impregnated on mesoporous silica (ExP) particles via supercritical carbon dioxide (scCO2) processing at various pressures (10–18 MPa), temperatures (308.2–328.2 K), and time (30–360 min). The impact of a co-solvent on the impregnation was also studied at the best determined pressure and temperature. The properties of the drug embedded in silica particles were analysed via gas chromatography (GC), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC), and nitrogen adsorption. An impregnation of 1 to 82 mg/g for PRG and 0.1 to 16 mg/g for TST was obtained depending on the processing parameters. There was a significant effect of pressure, time, and co-solvent on the impregnation efficiency. Generally, an increase in time and pressure plus the use of co-solvent led to an improvement in drug adsorption. Conversely, a rise in temperature resulted in lower impregnation of both TST and PRG on ExP. There was a substantial increase in the dissolution rate (> 90% drug release within the first 2 min) of both TST and PRG impregnated in silica particles when compared to the unprocessed drugs. This dissolution enhancement was attributed to the amorphisation of both drugs due to their adsorption on mesoporous silica.

Graphical Abstract

A critical review on the particle generation and other applications of rapid expansion of supercritical solution

The novel particle generation processes of Active Pharmaceutical Ingredient (API)/drug have been extensively explored in recent decades due to their wide-range applications in the pharmaceutical industry. The Rapid Expansion of Supercritical Solutions (RESS) is one of the promising techniques to obtain the fine particles (micro to nano-size) of APIs with narrow particle size distribution (PSD). In RESS, supercritical carbon dioxide (SC CO₂) and API are used as solvent and solute respectively. In this literature survey, the application of RESS in the formation of fine particles is critically reviewed. Solubility of API in SC CO₂ and supersaturation are the key factors in tuning the particle size. The different approaches to model and predict the solubility of API in SC CO₂ are discussed. Then, the effect of process parameters on mean particle size and the particle size distribution are interpreted in the context of solubility and supersaturation. Furthermore, the less-explored applications of RESS in preparation of solid-lipid nanoparticles, liposome, polymorphic conversion, cocrystallization and inclusion complexation are compared with traditional processes. The solubility enhancement of API in SC CO₂ using co-solvent and its applications in particle generation are explored in published literature. The development and modifications in the conventional RESS process to overcome the limitations of RESS are presented. Finally, the perspective on RESS with special attention to its commercial operation is highlighted.