Shape-Dependent Electrocatalysis: Oxygen Reduction on Carbon-Supported Gold Nanoparticles

Electrochemical investigations and antimicrobial activity of Au nanoparticles photodeposited on titania nanoparticles

Titanium oxide nanopowder (TiO2 NPs) was synthesized via anodization in 0.7 M perchloric acid then annealed in nitrogen at 450 °C for 3 h to prepared the Titanium Oxide Nitrogen annealed nanoparticles (TiO2 NPs-N2) powder as catalytic support. Using a photodeposition process, gold was added with isopropanol as a sacrificial donor and H[AuCl4] acid, producing gold nanoparticles on nitrogen-annealed titanium oxide nanoparticles (Au-NPs on TiO2-NPs-N2). The mass loading of Au NPs was 2.86 × 10-4 (g/cm2). TEM images of Au NPs on TiO2-NPs-N2 suggest circular particles with a tendency to agglomerate. Cyclic voltammetry (CV) was used to investigate the electrocatalytic performance of the Au NPs/TiO2-NPs-N2 catalysts in ferrocyanide, KOH, and H2SO4, and the results were compared to those of a polycrystalline Au electrode that is readily accessible in the market. In KOH, H2SO4, and (2 M KOH + 0.1 M glycerol) solutions, the Au NPs/TiO2-NPs-N2 electrode displayed a startlingly high electrocatalytic performance. Using CV, the electrocatalytic oxygen reduction reaction (ORR) of Au NPs/TiO2-NPs-N2 and Au-NPs against glycerol oxidation in basic media was studied. The results indicated that Au NPs/TiO2-NPs-N2 is a promising support material for improving the electrocatalytic activity for acidic and basic oxidation. The electrode made of Au NPs/TiO2-NTs-N2 has steady electrocatalytic activity and may be reused repeatedly. TiO2 NPs and Au NPs/TiO2NPs-N2 showed satisfactory antibacterial activity against some human pathogenic bacteria using the disc diffusion method.

Exploring the Role of the Connection Length of Screen-Printed Electrodes towards the Hydrogen and Oxygen Evolution Reactions

Zero-emission hydrogen and oxygen production are critical for the UK to reach net-zero greenhouse gasses by 2050. Electrochemical techniques such as water splitting (electrolysis) coupled with renewables energy can provide a unique approach to achieving zero emissions. Many studies exploring electrocatalysts need to "electrically wire" to their material to measure their performance, which usually involves immobilization upon a solid electrode. We demonstrate that significant differences in the calculated onset potential for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can be observed when using screen-printed electrodes (SPEs) of differing connection lengths which are immobilized with a range of electrocatalysts. This can lead to false improvements in the reported performance of different electrocatalysts and poor comparisons between the literature. Through the use of electrochemical impedance spectroscopy, uncompensated ohmic resistance can be overcome providing more accurate Tafel analysis.

Three-Dimensional Coherent Bragg Imaging of Rotating Nanoparticles

Bragg coherent diffraction imaging is a powerful strain imaging tool, often limited by beam-induced sample instability for small particles and high power densities. Here, we devise and validate an adapted diffraction volume assembly algorithm, capable of recovering three-dimensional datasets from particles undergoing uncontrolled and unknown rotations. We apply the method to gold nanoparticles which rotate under the influence of a focused coherent x-ray beam, retrieving their three-dimensional shapes and strain fields. The results show that the sample instability problem can be overcome, enabling the use of fourth generation synchrotron sources for Bragg coherent diffraction imaging to their full potential.

Coherent Bragg imaging of 60 nm Au nanoparticles under electrochemical control at the NanoMAX beamline

Nanoparticles are essential electrocatalysts in chemical production, water treatment and energy conversion, but engineering efficient and specific catalysts requires understanding complex structure-reactivity relations. Recent experiments have shown that Bragg coherent diffraction imaging might be a powerful tool in this regard. The technique provides three-dimensional lattice strain fields from which surface reactivity maps can be inferred. However, all experiments published so far have investigated particles an order of magnitude larger than those used in practical applications. Studying smaller particles quickly becomes demanding as the diffracted intensity falls. Here, in situ nanodiffraction data from 60 nm Au nanoparticles under electrochemical control collected at the hard X-ray nanoprobe beamline of MAX IV, NanoMAX, are presented. Two-dimensional image reconstructions of these particles are produced, and it is estimated that NanoMAX, which is now open for general users, has the requisites for three-dimensional imaging of particles of a size relevant for catalytic applications. This represents the first demonstration of coherent X-ray diffraction experiments performed at a diffraction-limited storage ring, and illustrates the importance of these new sources for experiments where coherence properties become crucial.

Ligand-regulated ORR activity of Au nanoparticles in alkaline medium: the importance of surface coverage of ligands

The surface coverage of ligands instead of their diverse chemical nature dominates the ORR activity and selectivity of AuNPs.

Green, Seed-Mediated Synthesis of Au Nanowires and Their Efficient Electrocatalytic Activity in Oxygen Reduction Reaction

A new, simple, green method for the synthesis of Au nanowires (average diameter 8 nm and several micrometers in length) using Au seeds prepared from bael gum (BG) is reported. The nanowires are characterized using UV-visible absorption spectroscopy, powder X-ray diffraction, transmission electron microscopy (TEM), and high-resolution-TEM. It is observed that the rate of the reduction process might be the decisive factor for the shape selectivity, as evident from the formation of nanowires at a particular concentration of seeds and NaOH. The polysaccharide present in BG is the active ingredient for the synthesis of Au nanowires, while the small molecules present in BG, when used alone, did not result in nanowire formation. The TEM images of the precursor to the Au nanowires suggested that new, nucleated particles align in a linear manner and fuse with one another, resulting in the nanowire. The linear fusion of the newly nucleated particles could be due to the lack of adequate protecting agent and the presence of Au complex adsorbed to the surface. The electrochemical activity of the nanowires for oxygen reduction reaction (ORR) is assessed and compared with that of nanotriangles and spherical nanoparticles of Au. The performance of Au nanowire is better than Au-nanomaterials (heat-treated as well as non-heat-treated), Au seeds, and clusters. The better efficiency of the nanowires when compared to that of the other reported catalysts is attributed to the presence of active (100) facets with numerous corners, edges, and surface defects.

Porous Carbon-Supported Gold Nanoparticles for Oxygen Reduction Reaction: Effects of Nanoparticle Size

Porous carbon-supported gold nanoparticles of varied sizes were prepared using thiolate-capped molecular Au25, Au38, and Au144 nanoclusters as precursors. The organic capping ligands were removed by pyrolysis at controlled temperatures, resulting in good dispersion of gold nanoparticles within the porous carbons, although the nanoparticle sizes were somewhat larger than those of the respective nanocluster precursors. The resulting nanocomposites displayed apparent activity in the electroreduction of oxygen in alkaline solutions, which increased with decreasing nanoparticle dimensions. Among the series of samples tested, the nanocomposite prepared with Au25 nanoclusters displayed the best activity, as manifested by the positive onset potential at +0.95 V vs RHE, remarkable sustainable stability, and high numbers of electron transfer at (3.60-3.92) at potentials from +0.50 to +0.80 V. The performance is comparable to that of commercial 20 wt % Pt/C. The results demonstrated the unique feasibility of porous carbon-supported gold nanoparticles as high-efficiency ORR catalysts.

Shape-selective synthesis of NiO nanostructures for hydrazine oxidation as a nonenzymatic amperometric sensor

In this work, we demonstrate the shape-dependent electrocatalytic activity of NiO NPs towards hydrazine oxidation.

In situ preparation of multi-wall carbon nanotubes/Au composites for oxygen electroreduction

Multi-wall carbon nanotubes (CNTs)/Au nanocomposites have been prepared by the in situ reduction approach for oxygen reduction reaction.

Carbon nanotubes-gold nanohybrid as potent electrocatalyst for oxygen reduction in alkaline media

A carbon nanotube-gold nanohybrid was used as catalyst for the reduction of molecular oxygen in acidic and alkaline media, the relevant cathode reaction in fuel cells. In alkaline medium, the nanohybrid exhibits excellent activity with a dominant 4e(-) reduction of O2 and low overpotential requirement compared to previously reported nano-gold materials. This property is linked to its capability to efficiently mediate HO2(-) dismutation.