Towards a new understanding of bioelectrochemical systems from the perspective of microecosystems: A critical review

Bioelectrochemical system (BES) holds promise for sustainable energy generation and wastewater treatment. The microbial communities, as the core of BES, play a crucial role in its performance, thus needing to be systematically studied. However, researches considering microbial communities in BES from an ecological perspective are limited. This review provided a comprehensive summary of the BES with special emphasis on microecological principles, commencing with the dynamic formation and succession of the microbial communities. It also clarified the intricate interspecies relationships and quorum-sensing mechanisms regulated by dominant species. Furthermore, this review addressed the crucial themes in BES-related researches on ecological processes, including growth patterns, ecological structures, and defense strategies against external disturbances. By offering this novel perspective, it would contribute to enhancing the understanding of BES-centered technologies and facilitating future research in this field.

The effect of ammonia concentration on the treatment of bio electrochemical leachate using MFCs technology

Microbial fuel cells (MFCs) have garnered attention in bio-electrochemical leachate treatment systems. The most common forms of inorganic ammonia nitrogen are ammonium ([Formula: see text]) and free ammonia. Anaerobic digestion can be inhibited in both direct (changes in environmental conditions, such as fluctuations in temperature or pH, can indirectly hinder microbial activity and the efficiency of the digestion process) and indirect (inadequate nutrient levels, or other conditions that indirectly compromise the microbial community's ability to carry out anaerobic digestion effectively) ways by both kinds. The performance of a double-chamber MFC system-composed of an anodic chamber, a cathode chamber with fixed biofilm carriers (carbon felt material), and a Nafion 117 exchange membrane is examined in this work to determine the impact of ammonium nitrogen ([Formula: see text]) inhibition. MFCs may hold up to 100 mL of fluid. Therefore, the bacteria involved were analysed using 16S rRNA. At room temperature, with a concentration of 800 mg L-1 of ammonium nitrogen and 13,225 mg L-1 of chemical oxygen demand (COD), the study produced a considerable power density of 234 mWm-3. It was found that [Formula: see text] concentrations above 800 mg L-1 have an inhibitory influence on power output and treatment effectiveness. Multiple routes removed the most nitrogen ([Formula: see text]-N: 87.11 ± 0.7%, NO2 -N: 93.17 ± 0.2% and TN: 75.24 ± 0.3%). Results from sequencing indicate that the anode is home to a rich microbial community, with anammox (6%), denitrifying (6.4%), and electrogenic bacteria (18.2%) making up the bulk of the population. Microbial fuel cells can efficiently and cost-effectively execute anammox, a green nitrogen removal process, in landfill leachate.

Optimising the Hydraulic Retention Time in a Pilot-Scale Microbial Electrolysis Cell to Achieve High Volumetric Treatment Rates Using Concentrated Domestic Wastewater

Bioelectrochemical systems (BES) have the potential to deliver energy-neutral wastewater treatment. Pilot-scale tests have proven that they can operate at low temperatures with real wastewaters. However, volumetric treatment rates (VTRs) have been low, reducing the ability for this technology to compete with activated sludge (AS). This paper describes a pilot-scale microbial electrolysis cell (MEC) operated in continuous flow for 6 months. The reactor was fed return sludge liquor, the concentrated filtrate of anaerobic digestion sludge that has a high chemical oxygen demand (COD). The use of a wastewater with increased soluble organics, along with optimisation of the hydraulic retention time (HRT), resulted in the highest VTR achieved by a pilot-scale MEC treating real wastewater. Peak HRT was 0.5-days, resulting in an average VTR of 3.82 kgCOD/m³∙day and a 55% COD removal efficiency. Finally, using the data obtained, a direct analysis of the potential savings from the reduced loading on AS was then made. Theoretical calculation of the required tank size, with the estimated costs and savings, indicates that the use of an MEC as a return sludge liquor pre-treatment technique could result in an industrially viable system.