Evidence for Independent Glycerol Electrooxidation Behavior on Different Ordered Domains of Polycrystalline Platinum

Clarifying Glycerol Electrooxidation Studies on Pd-Based Catalysts: Insights Into Catalytic Performance and Practical Challenges

Escalating biodiesel production led to a surplus of glycerol, prompting its exploration as a valuable resource in industrial applications. Electrochemical systems have been studied, specifically employing noble metal catalysts like palladium for glycerol electrooxidation. Despite numerous studies on Pd-based catalysts for glycerol electrooxidation, a comprehensive analysis addressing critical questions related to the economic feasibility, global sourcing of Pd, and the thematic cohesion of publications in this field is lacking. Moreover, a standardized framework for comparing the results of various studies is absent, hindering progress on glycerol technologies. This critical overview navigates the evolution of Pd-based catalysts for glycerol electrooxidation, examining catalytic activity, stability, and potential applications. It critically addresses the geographical sources of Pd, the motivation behind glycerol technology exploration, thematic coherence in existing publications, and the meaningful comparison of results. It correlates the use of Pd-based catalysts with the natural source of Pd and the origin of glycerol derived from biodiesel. The proposed standardized approach for comparing electrochemical parameters and establishing experimental protocols provides a foundation for meaningful study comparisons. This critical overview underscores the need to address fundamental questions to accelerate the transition of glycerol technologies from laboratories to practical applications.

Interchangeable Biomass Fuels for Paper-Based Microfluidic Fuel Cells: Finding Their Power Density Limits

Paper batteries are self-pumping emerging tools for powering portable analytical systems. These disposable energy converters must be low-cost and must achieve enough energy to power electronic devices. The challenge is reaching high energy while keeping the low cost. Here, for the first time, we report a paper-based microfluidic fuel cell (PμFC) equipped with Pt/C on a carbon paper (CP) anode and a metal-free CP cathode fed by biomass-derived fuels to deliver high power. The cells were engineered in a mixed-media configuration, where methanol, ethanol, ethylene glycol, or glycerol is electro-oxidized in an alkaline medium, while Na2S2O8 is reduced in an acidic medium. This strategy allows for optimizing each half-cell reaction independently. The colaminar channel of the cellulose paper was chemically investigated by mapping the composition, which reveals a majority of elements from the catholyte and anolyte on each respective side and a mixture of both at the interface, assuring the existing colaminar system. Moreover, the colaminar flow was studied by investigating the flow rate by considering recorded videos for the first time. All PμFCs show 150-200 s to build a stable colaminar flow, which matches the time to reach a stable open circuit voltage. The flow rate is similar for different concentrations of methanol and ethanol, but it decreases with the increase in ethylene glycol and glycerol concentrations, suggesting a longer residence time for the reactants. The cells perform differently for the different concentrations, and their limiting power densities are composed of a balance among anode poisoning, residence time, and viscosity of the liquids. The sustainable PμFCs can be interchangeably fed by the four biomass-derived fuels to deliver ∼2.2-3.9 mW cm-2. This allows choosing the proper fuel due to their availability. The unprecedented PμFC fed by ethylene glycol delivered 6.76 mW cm-2, which is the benchmark output power for a paper battery fed by alcohol.

Role of Ni in PtNi Bimetallic Electrocatalysts for Hydrogen and Value-Added Chemicals Coproduction via Glycerol Electrooxidation

Pt-based bimetallic electrocatalysts are promising candidates to convert surplus glycerol from the biodiesel industry to value-added chemicals and coproduce hydrogen. It is expected that the nature and content of the elements in the bimetallic catalyst can not only affect the reaction kinetics but also influence the product selectivity, providing a way to increase the yield of the desired products. Hence, in this work, we investigate the electrochemical oxidation of glycerol on a series of PtNi nanoparticles with increasing Ni content using a combination of physicochemical structural analysis, electrochemical measurements, operando spectroscopic techniques, and advanced product characterizations. With a moderate Ni content and a homogenously alloyed bimetallic Pt-Ni structure, the PtNi2 catalyst displayed the highest reaction activity among all materials studied in this work. In situ FTIR data show that PtNi2 can activate the glycerol molecule at a more negative potential (0.4 V _RHE) than the other PtNi catalysts. In addition, its surface can effectively catalyze the complete C-C bond cleavage, resulting in lower CO poisoning and higher stability. Operando X-ray absorption spectroscopy and UV-vis spectroscopy suggest that glycerol adsorbs strongly onto surface Ni(OH) _x sites, preventing their oxidation and activation of oxygen or hydroxyl from water. As such, we propose that the role of Ni in PtNi toward glycerol oxidation is to tailor the electronic structure of the pure Pt sites rather than a bifunctional mechanism. Our experiments provide guidance for the development of bimetallic catalysts toward highly efficient, selective, and stable glycerol oxidation reactions.

Direct 3D Printing of Binder-Free Bimetallic Nanomaterials as Integrated Electrodes for Glycerol Oxidation with High Selectivity for Valuable C3 Products

Net-zero carbon strategies and green synthesis methodologies are key to realizing the United Nations' sustainable development goals (SDGs) on a global scale. An electrocatalytic glycerol oxidation reaction (GOR) holds the promise of upcycling excess glycerol from biodiesel production directly into precious hydrocarbon commodities that are worth orders of magnitude more than the glycerol feedstock. Despite years of research on the GOR, the synthesis process of nanoscale electrocatalysts still involves (1) prohibitive heat input, (2) expensive vacuum chambers, and (3) emission of toxic liquid pollutants. In this paper, these knowledge gaps are closed via developing a laser-assisted nanomaterial preparation (LANP) process to fabricate bimetallic nanocatalysts (1) at room temperature, (2) under an ambient atmosphere, and (3) without liquid waste emission. Specifically, PdCu nanoparticles with adjustable Pd:Cu content supported on few-layer graphene can be prepared using this one-step LANP method with performance that can rival state-of-the-art GOR catalysts. Beyond exhibiting high GOR activity, the LANP-fabricated PdCu/C nanomaterials with an optimized Pd:Cu ratio further deliver an exclusive product selectivity of up to 99% for partially oxidized C₃ products with value over 280000-folds that of glycerol. Through DFT calculations and in situ XAS experiments, the synergy between Pd and Cu is found to be responsible for the stability under GOR conditions and preference for C₃ products of LANP PdCu. This dry LANP method is envisioned to afford sustainable production of multimetallic nanoparticles in a continuous fashion as efficient electrocatalysts for other redox reactions with intricate proton-coupled electron transfer steps that are central to the widespread deployment of renewable energy schemes and carbon-neutral technologies.

An Overview of Glycerol Electrooxidation Mechanisms on Pt, Pd and Au

In the most recent decade, glycerol electrooxidation (GEOR) has attracted extensive research interest for valorization of glycerol: the conversion of glycerol to value-added products. These reactions at platinum, palladium, and gold electrodes have a lot of uncertainty in their reaction mechanisms, which has generated some controversies. This review gathers many reported experimental results, observations and proposed reaction mechanisms in order to draw a full picture of GEOR. A particular focus is the clarification of two propositions: Pd is inferior to Pt in cleaving the C-C bonds of glycerol during the electrooxidation and the massive production of CO₂ at high overpotentials is due to the oxidation of the already-oxidized carboxylate products. It is concluded that the inferior C-C bond cleavability with Pd electrodes, as compared with Pt electrodes, is due to the inefficiency of deprotonation, and the massive generation of CO₂ as well as other C1/C2 side products is partially caused by the consumption of OH^- at the anodes, as a lower pH reduces the amount of carboxylates and favors the C-C bond scission. A reaction mechanism is proposed in this review, in which the generation of side products are directly from glycerol ("competition" between each side product) rather than from the further oxidation of C2/C3 products. Additionally, GEOR results and associated interpretations for Ni electrodes are presented, as well as a brief review on the performances of multi-metallic electrocatalysts (most of which are nanocatalysts) as an introduction to these future research hotpots.

Selective Electro-Oxidation of Glycerol to Dihydroxyacetone by PtAg Skeletons

Developing high-performance electrocatalysts for the selective conversion of glycerol into value-added chemicals is of great significance. Herein, three-dimensional nanoporous PtAg skeletons were studied as catalysts for the electro-oxidation of glycerol. The structural features of the PtAg skeletons were revealed by electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and UV-vis spectroscopy. The electrochemical activity of the catalysts was examined by cyclic voltammetry, linear sweeping voltammetry, and chronoamperometry. The resulting PtAg skeletons exhibit a peak current density of 7.57 mA cm^-2, which is 15.4-fold higher than that of Pt/C, making the PtAg skeletons one of the best electrocatalysts for glycerol oxidation. High-performance liquid chromatography results show that the PtAg skeletons yield a remarkable dihydroxyacetone selectivity of 82.6%, which has so far been the second largest value reported in the literature. The superior activity and selectivity of the PtAg skeletons are ascribed to the large surface area and abundant Pt(111) facets. Additionally, the effects of glycerol and KOH concentrations and reaction time on product selectivity were investigated.

Probing the surface fine structure through electrochemical oscillations

In the course of (electro)catalytic reactions, reversible and irreversible changes, namely the formation of adsorbed poisons, catalyst degradation, surface roughening, etc., take place at distinct time-scales. Reading the transformations on the catalyst surface from the measurement of the reaction rates is greatly desirable but generally not feasible. Herein, we study the effect of random surface defects on Pt(100) electrodes toward the electro-oxidation of methanol in acidic media. The surface defects are gently generated in situ and their relative magnitudes are reproducibly controlled. The system was characterized under conventional conditions and investigated under an oscillatory regime. Oscillatory patterns were selected according to the presence of surface defects, and a continuous transition from large amplitude/low frequency oscillations (type L) on smooth surfaces to small amplitude/high frequency oscillations (type S) on disordered surfaces was observed. Importantly, self-organized potential oscillations were found to be much more sensitive to the surface structure than conventional electrochemical signatures or even other in situ characterization methods. As a consequence, we proved the possibility of following the surface fine structure in situ and in a non-invasive manner by monitoring the temporal evolution of oscillatory patterns. From a mechanistic point of view, we describe the role played by surface defects and of the adsorbed and partially oxidized, dissolved species on the oscillations of type S and L.

Electrocatalytic valorisation of biomass derived chemicals

Recent progress in electro-valorization of biomass-derived intermediates is reviewed, while a perspective on future R&D in this field is provided.

A Pd nanocatalyst supported on multifaceted mesoporous silica with enhanced activity and stability for glycerol electrooxidation

The current density of glycerol electrooxidation on Pd/SiO₂reached twice the values found for Pd/C. Mesosporous silica support works as a trap that confines the reactant.

How do random superficial defects influence the electro-oxidation of glycerol on Pt(111) surfaces?

The glycerol electrooxidation reaction (GEOR) has attracted huge interest in the last decade due to the very low price and availability of this polyol. In this work, we studied the GEOR on Pt(111) electrodes by introducing different densities of random defects. Our results showed that the generation of defects on Pt(111) slightly modified the GEOR onset potential, however it generates changes in the voltammetric oxidation charges and also in the relative production of CO₂ to carbonyl containing compounds, C[double bond, length as m-dash]O. The voltammetric profiles in the forward scan show two oxidation peaks. FTIR data show that the first one is connected with the GlOH dissociative adsorption to form CO (and others intermediates) while the second one, at higher potentials, matches the onsets of the CO oxidation to CO₂ and the C[double bond, length as m-dash]O production. FTIR also confirms that the lower activity of defected electrodes at lower potentials is connected to a higher CO poisoning. DFT calculations show that the presence of CO molecules on a Pt defected surface keeps water and GlOH molecules far from the surface and linked by H bonds. This paper is the last of a series of three works where we explore the GEOR on an important number of different Pt surfaces. These works show that it is difficult to oxidize GlOH at potentials lower than 0.6 V (under our experimental conditions) without suffering an important electrode poisoning (mainly by CO). Since the structure of nanoparticles might be mimicked by defected single crystals, these sets of reports provide a considerable amount of information concerning the influence of such surfaces towards GlOH reaction in acidic media. Therefore, if the well-known "nano"-effect does not produce substantial changes in the activity of Pt materials, they are not useful to be applied in a Direct Glycerol Fuel Cell (DGFC). On the other hand, it is very interesting that the density of electrode defects permits us to tune the relative production of CO₂ to C[double bond, length as m-dash]O.