Improving Glycerol Electrooxidation Performance on Nanocubic PtCo Catalysts

As glycerol (GLY) has emerged as a highly functional and cheap platform molecule and as an abundant biodiesel production byproduct, possible conversion methods have been investigated. One of the promising approaches is the glycerol electrooxidation (GEOR) on noble metal-based catalysts. Although noble metals, especially Pt, are generally very stable at different pH and highly selective toward three-carbon (C3) products, their electrocatalytic performance can be further improved by morphology tuning and alloying with non-noble metals like Co. In the present study, cubic PtxCo100-x (x = 100, 80, and 60) nanoparticles were investigated in an alkaline medium at 20 and 40 °C. The effect of the composition and reaction conditions on the selectivity of the GEOR toward C3 products like lactate and glycerate was studied, and the reaction mechanism was discussed. The highest mass activity was found for Pt80Co20, although when the specific activity, glycerol conversion, and GEOR selectivity were compared, Pt60Co40 was the superior catalyst overall. In general, all catalysts, even those that are Co-rich, exhibited a high C3 product selectivity up to 95% at 0.67 V vs RHE. The low applied potential of 0.67 V vs RHE at 40 °C facilitated lactate formation with selectivity up to 72%. At the same time, the glycerate formation with a selectivity of up to 40%, as well as C-C bond cleavage, was more favored at 0.87 V vs RHE.

An Overview of Glycerol Electrooxidation Mechanisms on Pt, Pd and Au

In the most recent decade, glycerol electrooxidation (GEOR) has attracted extensive research interest for valorization of glycerol: the conversion of glycerol to value-added products. These reactions at platinum, palladium, and gold electrodes have a lot of uncertainty in their reaction mechanisms, which has generated some controversies. This review gathers many reported experimental results, observations and proposed reaction mechanisms in order to draw a full picture of GEOR. A particular focus is the clarification of two propositions: Pd is inferior to Pt in cleaving the C-C bonds of glycerol during the electrooxidation and the massive production of CO₂ at high overpotentials is due to the oxidation of the already-oxidized carboxylate products. It is concluded that the inferior C-C bond cleavability with Pd electrodes, as compared with Pt electrodes, is due to the inefficiency of deprotonation, and the massive generation of CO₂ as well as other C1/C2 side products is partially caused by the consumption of OH^- at the anodes, as a lower pH reduces the amount of carboxylates and favors the C-C bond scission. A reaction mechanism is proposed in this review, in which the generation of side products are directly from glycerol ("competition" between each side product) rather than from the further oxidation of C2/C3 products. Additionally, GEOR results and associated interpretations for Ni electrodes are presented, as well as a brief review on the performances of multi-metallic electrocatalysts (most of which are nanocatalysts) as an introduction to these future research hotpots.

Shape-controlled metal nanoparticles for electrocatalytic applications

The application of shape-controlled metal nanoparticles is profoundly impacting the field of electrocatalysis. On the one hand, their use has remarkably enhanced the electrocatalytic activity of many different reactions of interest. On the other hand, their usage is deeply contributing to a correct understanding of the correlations between shape/surface structure and electrochemical reactivity at the nanoscale. However, from the point of view of an electrochemist, there are a number of questions that must be fully satisfied before the evaluation of the shaped metal nanoparticles as electrocatalysts including (i) surface cleaning, (ii) surface structure characterization, and (iii) correlations between particle shape and surface structure. In this chapter, we will cover all these aspects. Initially, we will collect and discuss about the different practical protocols and procedures for obtaining clean shaped metal nanoparticles. This is an indispensable requirement for the establishment of correct correlations between shape/surface structure and electrochemical reactivity. Next, we will also report how some easy-to-do electrochemical experiments including their subsequent analyses can enormously contribute to a detailed characterization of the surface structure of the shaped metal nanoparticles. At this point, we will remark that the key point determining the resulting electrocatalytic activity is the surface structure of the nanoparticles (obviously, the atomic composition is also extremely relevant) but not the particle shape. Finally, we will summarize some of the most significant advances/results on the use of these shaped metal nanoparticles in electrocatalysis covering a wide range of electrocatalytic reactions including fuel cell-related reactions (electrooxidation of formic acid, methanol and ethanol and oxygen reduction) and also CO2 electroreduction.

Graphical Abstract:

Ordered SiO2 cavity promoted formation of gold single crystal nanoparticles towards an efficient electrocatalytic application

A [111] facet dominated gold single crystal electrode with improved electrocatalytic ability for the oxidation of ethanol and nitrite.

Tuning Surface Structure of 3D Nanoporous Gold by Surfactant-Free Electrochemical Potential Cycling

3D dealloyed nanoporous metals have emerged as a new class of catalysts for various chemical and electrochemical reactions. Similar to other heterogeneous catalysts, the surface atomic structure of the nanoporous metal catalysts plays a crucial role in catalytic activity and selectivity. Through surfactant-assisted bottom-up synthesis, the surface-structure modification has been successfully realized in low-dimensional particulate catalysts. However, the surface modification by top-down dealloying has not been well explored for nanoporous metal catalysts. Here, a surfactant-free approach to tailor the surface structure of nanoporous gold by surface relaxation via electrochemical redox cycling is reported. By controlling the scan rates, nanoporous gold with abundant {111} facets or {100} facets can be designed and fabricated with dramatically improved electrocatalysis toward the ethanol oxidation reaction.

Gold nanocrystal arrays as electrocatalysts for the oxidation of methanol and ethanol

A general difficulty in the comparison of catalysts regarding their electrochemical activities is the significant dependency on the electrode preparation method. In addition to single-crystal, thin-film, and polycrystalline electrodes, most electrocatalysts contain a physical mixture of catalytically active nanocrystals (NCs), conductive carbon support, and binding agent. This type of preparation makes the agglomeration of NCs to larger entities inevitable and simultaneously decreases the catalytically active surface area. In this work, electocatalysts based on two-dimensional arrays of self-assembled monodisperse Au NCs with a particle size of 8 nm have been fabricated. Their electrocatalytic performance in the electrochemical oxidation reaction of methanol and ethanol was investigated for different pH values. The self-assembly of Au NCs into two-dimensional arrays enables to fabricate electrocatalysts with a high mass activity in alkaline electrolytes for alcohol oxidation reactions.