MOF-Derived Porous Ni x Fe3-x O4 Nanotubes with Excellent Performance in Lithium-Ion Batteries

Core-bishell NiFe@NC@MoS2 for boosting electrocatalytic activity towards ultra-efficient oxygen evolution reaction

Designing and developing suitable oxygen evolution reaction (OER) catalysts with high activity and stability remain challenging in electrolytic water splitting. Hence, NiFe@NC@MoS2 core-bishell composites wrapped by molybdenum disulphide (MoS2) and nitrogen-doped graphene (NC) were prepared using hydrothermal synthesis in this research. NiFe@NC@MoS2 composite exhibits excellent performance with an overpotential of 288 mV and a Tafel slope of 53.2 mV·dec-1 at a current density of 10 mA·cm-2 in 1 M KOH solution, which is superior to commercial RuO2. NC and MoS2 bishells create profuse edge active sites that enhance the adsorption ability of OOH* while lowering the overall overpotential of the product and improving its oxygen precipitation performance. The density function theory(DFT) analysis confirms that the layered MoS2 in NiFe@NC@MoS2 provides additional edge active sites and enhances electron transfer, thus increasing the intrinsic catalytic activity. This research paves a novel way for developing OER electrocatalysts with excellent catalytic performance.

Bimetallic MOFs-Derived NiFe2O4/Fe2O3 Enabled Dendrite-free Lithium Metal Anodes with Ultra-High Area Capacity Based on An Intermittent Lithium Deposition Model

In practical operating conditions, the lithium deposition behavior is often influenced by multiple coupled factors and there is also a lack of comprehensive and long-term validation for dendrite suppression strategies. Our group previously proposed an intermittent lithiophilic model for high-performance three-dimensional (3D) composite lithium metal anode (LMA), however, the electrodeposition behavior was not discussed. To verify this model, this paper presents a modified 3D carbon cloth (CC) backbone by incorporating NiFe2O4/Fe2O3 (NFFO) nanoparticles derived from bimetallic NiFe-MOFs. Enhanced Li adsorption capacity and lithiophilic modulation were achieved by bimetallic MOFs-derivatives which prompted faster and more homogeneous Li deposition. The intermittent model was further verified in conjunction with the density functional theory (DFT) calculations and electrodeposition behaviors. As a result, the obtained Li-CC@NFFO||Li-CC@NFFO symmetric batteries exhibit prolonged lifespan and low hysteresis voltage even under ultra-high current and capacity conditions (5 mA cm-2, 10 mAh cm-2), what's more, the full battery coupled with a high mass loading (9 mg cm-2) of LiFePO4 cathode can be cycled at a high rate of 5 C, the capacity retention is up to 95.2 % before 700 cycles. This work is of great significance to understand the evolution of lithium dendrites on the 3D intermittent lithiophilic frameworks.

Thermally activated structural phase transitions and processes in metal-organic frameworks

The structural knowledge of metal-organic frameworks is crucial to the understanding and development of new efficient materials for industrial implementation. This review classifies and discusses recent advanced literature reports on phase transitions that occur during thermal treatments on metal-organic frameworks and their characterisation. Thermally activated phase transitions and procceses are classified according to the temperaturatures at which they occur: high temperature (reversible and non-reversible) and low temperature. In addition, theoretical calculations and modelling approaches employed to better understand these structural phase transitions are also reviewed.

Bimetallic metal-organic frameworks and their derivatives

Bimetallic metal-organic frameworks (MOFs) have two different metal ions in the inorganic nodes. According to the metal distribution, the architecture of bimetallic MOFs can be classified into two main categories namely solid solution and core-shell structures. Various strategies have been developed to prepare bimetallic MOFs with controlled compositions and structures. Bimetallic MOFs show a synergistic effect and enhanced properties compared to their monometallic counterparts and have found many applications in the fields of gas adsorption, catalysis, energy storage and conversion, and luminescence sensing. Moreover, bimetallic MOFs can serve as excellent precursors/templates for the synthesis of functional nanomaterials with controlled sizes, compositions, and structures. Bimetallic MOF derivatives show exposed active sites, good stability and conductivity, enabling them to extend their applications to the catalysis of more challenging reactions and electrochemical energy storage and conversion. This review provides an overview of the significant advances in the development of bimetallic MOFs and their derivatives with special emphases on their preparation and applications.

Architecting hierarchical shell porosity of hollow prussian blue-derived iron oxide for enhanced Li storage

Delicate architecture of active material enables improving the performacne of lithium ion batteries. Environmental-friendly Fe₂ O₃ anode has high theoretical specific capacity (1007 mAh g^-1 ) in lithium ion batteries, but suffers from structural collapsing and poor electronic conductivity. Herein, we design an unique hierarchical iron oxide by regulating the initial precursor prussian blue and targeting hollow-shell structures with full consideration of temperature controls. Among them, Fe₂ O₃ with a sheet-crossing structure at 650°C, affords obvious advantages of improved electronic conductivity, short ionic diffusion length, prevented particle agglomeration, and buffer volume change. Thus, we achieve a superior discharge specific capacity of 611 mAh g^-1 at 500 mA g^-1 . Regulating hierarchical structure of prussian blue-assisted oxides enables effectively enchancing Li storge performance. LAY DESCRIPTION: Nanoparticle self-assembly, one of bottom-up methods is often used to prepare hollow hierarchical structures, whereas it suffers from low productivity and insufficient stability. Hence, we designed a unique hierarchical iron oxide by top-down method with regulating the initial precursor PB and targeting hollow-shell structures through full consideration of temperature controls. Delicate architecture of active material enables improving the performacne of lithium ion batteries. Environmental-friendly Fe₂ O₃ anode has high theoretical specific capacity (1007 mAh g^-1 ) in lithium ion batteries, but suffers from structural collapsing and poor electronic conductivity. Hence, we prepared Prussian Blue (PB) materials with different sizes and calcined them at different temperatures. We found that no matter what the size of PB, the sheet-crossing morphology appeared at 650°C, and the interlaced morphology was the key to improve the performance of lithium batteries. If the size of PB precursor is too large or too small, it has adverse effects on lithium batteries. Only when the size and calcination temperature of PB precursor reach the optimum state, the best performance can be obtained. The calcination PB-K-3 at 650°C has a unique hierarchical structure of sheet-crossing. An obvious advantages include the prevention of particle agglomeration, short ionic diffusion lengths, and buffering volume changes. As a consequence, 611 mAh g^-1 was obtained at the current density of 500 mA g^-1 . In addition, we observed the structural changes of electrode plates at different reaction potentials, according to the reaction equation of Fe₂ O₃ +xLi⁺ +xe→Li_x Fe₂ O₃ . With the proceeding charge process, the voltage increases from 0.01 to 3 V, the lithium ions gradually comes out of the iron oxide electrode surface. Whereas the discharging process reverses the aforementioned phenomena. Even if the changing volumes, however, the shape of cubic blocks for the PB-K-3 is preserved at different potentials. Taking these advantages into account, our designed MOFs-derived struture was an effective way to prepare hollow hierarchical structure with enhanced Li storage performacne. Such work is expected to facilitate the design of new electrode structure of lithium batteries.

MOF-Derived Metal Oxide Composites for Advanced Electrochemical Energy Storage

Over the past two decades, metal-organic frameworks (MOFs), a type of porous material, have aroused great interest as precursors or templates for the derivation of metal oxides and composites for the next generation of electrochemical energy storage applications owing to their high specific surface areas, controllable structures, and adjustable pore sizes. The electrode materials, which affect the performance in practical applications, are pivotal components of batteries and supercapacitors. Metal oxide composites derived from metal-organic frameworks possessing high reversible capacity and superior rate and cycle performance are excellent electrode materials. In this Review, potential applications for MOF-derived metal oxide composites for lithium-ion batteries, sodium-ion batteries, lithium-oxygen batteries, and supercapacitors are studied and summarized. Finally, the challenges and opportunities for future research on MOF-derived metal oxide composites are proposed on the basis of academic knowledge from the reported literature as well as from experimental experience.

Coordination polymer-derived nano-sized zinc ferrite with excellent performance in nitro-explosive detection

Herein, a mixed metal coordination polymer, {(H₂pip)[Zn_1/3Fe_2/3(pydc-2,5)₂(H₂O)]·2H₂O} 1 {where H₂pip = piperazinediium and pydc-2,5 = pyridine-2,5-dicarboxylate}, was successfully synthesized using a hydrothermal technique. To confirm the structure and phase purity of 1, single crystals of an isomorphous pure Fe compound, {(H₂pip)[Fe(pydc-2,5)₂(H₂O)]·2H₂O} 1a, were synthesized based on similar synthetic conditions. Single crystal X-ray data of 1a confirmed the one-dimensional anionic metal-organic coordination polymer hydrogen bonded with protonated piprazine (piperazinediium) and lattice water molecules. The phase purity of 1 and 1a were confirmed via powder X-ray diffraction. Compound 1 was systematically characterized using IR, TGA, SEM, and EDX elemental mapping analysis. Compound 1 was used as a single source precursor for the preparation of nano-sized ZnFe₂O₄via thermal decomposition. The as-obtained ZnFe₂O₄ was fully characterized using PXRD, SEM, TEM, and EDX elemental mapping analysis. It was found that ZnFe₂O₄ was formed in its pure form with particle size in the nano-dimension. The aqueous dispersion of nano-sized ZnFe₂O₄ exhibits a strong emission at 402 nm upon excitation at 310 nm. This emissive property was employed for luminescence-based detection of nitroaromatic explosives in an aqueous medium through luminescence quenching for the first time. Importantly, selective detections have been observed for phenolic nitroaromatics based on differential luminescence quenching behaviour along with a detection limit of 57 ppb for 2,4,6-trinitrophenol (TNP) in water.

Metal-Organic Framework-Derived Reduced Graphene Oxide-Supported ZnO/ZnCo2O4/C Hollow Nanocages as Cathode Catalysts for Aluminum-O2 Batteries

Aluminum-air battery is a promising candidate for large-scale energy applications because of its low cost and high energy density. Remarkably, tremendous efforts have been concentrated on developing efficient and stable cathode electrocatalysts toward the oxygen reduction reaction. In this work, a hydrothermal-calcination approach was utilized to prepare novel reduced graphene oxide (rGO)-supported hollow ZnO/ZnCo₂O₄ nanoparticle-embedded carbon nanocages (ZnO/ZnCo₂O₄/C@rGO) using a zeolitic imidazolate framework (ZIF-67)/graphene oxide/zinc nitrate composite as the precursor. The ZnO/ZnCo₂O₄/C@rGO hybrid exhibits remarkable electrocatalytic performance for oxygen reduction reaction under alkaline conditions and superior stability and methanol tolerance to those of the commercial Pt/C catalyst. Furthermore, novel and simple Al-air coin cells were first fabricated using the hybrid materials as cathode catalysts under ambient air conditions to further investigate their catalytic performance. The coin cell with the ZnO/ZnCo₂O₄/C@rGO cathode catalyst displays a higher open circuit voltage and discharge voltage and more sluggish potential drop than those of the cell with the ZnO/ZnCo₂O₄/C cathode catalyst, which confirms that rGO can enhance the electrocatalytic activity and stability of the catalyst system. The excellent electrocatalytic performance of the ZnO/ZnCo₂O₄/C@rGO hybrid is attributed to the prominent conductivity and high specific surface area resulting from rGO, the more accessible catalytic active sites induced by the unique porous hollow nanocage structure, and synergic covalent coupling between rGO sheets and ZnO/ZnCo₂O₄/C nanocages.

Amorphous FeF3/C nanocomposite cathode derived from metal–organic frameworks for sodium ion batteries

A cathode of FeF₃/C nanocomposites has been fabricated by a simple vapor-solid fluoridation route which shows superior Na-ion storage performance.

Design and synthesis of coordination polymers with chelated units and their application in nanomaterials science

The advances and problems associated with the preparation, properties and structure of coordination polymers with chelated units are presented and assessed.

Mechanism for the enhanced oxygen reduction reaction of La0.6Sr0.4Co0.2Fe0.8O3−δ by strontium carbonate

We demonstrate that SrCO₃ can improve ORR on LSCF, solving the problem of contradicting effects of Sr surface segregation on LSCF.