Oxygen Reduction at Carbon-Supported Lanthanides: The Role of the B-Site

Cu-doped LaNiO3 perovskite catalyst for DRM: revisiting it as a molecular-level nanocomposite

Dry reforming of methane (DRM) was extensively studied on Cu-doped LaNiO3 catalysts. The main findings of this work are as follows: (i) thermal switching of the catalyst phase between the parent perovskite and molecular-level nanocomposite of individual components formed in situ during DRM, (ii) reusability of the catalyst with enhanced activity, and (iii) regeneration of the catalyst phase at a lower temperature than that required for the formation of the parent perovskite. The present investigation provides an extensive analysis and understanding of the DRM reaction using Cu-doped LaNiO3 compared to the result reported by Moradi et al., (Chin. J. Catal., 2012, 33, 797-801) and hence provides new insights into its catalytic activity. Phase-pure LaNi1-xCuxO3 catalysts, specifically LaNi0.8Cu0.2O3, exhibited high catalytic activity towards the DRM reaction (97% CH4 and 99% CO2 conversion with an H2/CO ratio of ∼1.4-0.9). Remarkably, although the initial perovskite phase primarily decomposed into its component phases after DRM, its catalytic activity was barely affected and maintained even after 100 h. The regeneration of the initial perovskite from the disintegrated binary phases via annealing at temperatures even lower than the synthesis temperature together with the amazing retention of activity was very intriguing. The parallel activity of the pristine perovskite and its degraded binary mixtures makes it difficult to identify the actual components responsible for the DRM activity. Accordingly, we have explained the sustained activity of the degraded perovskite catalyst in the context of nanocomposite formation at the molecular level in the reforming atmosphere with the availability of Ni0 and NiO, as revealed by the thoroughly characterized samples in the as-prepared, aged, and regenerated forms.

Eco-Friendly Mechanochemical Synthesis of Bifunctional Metal Oxide Electrocatalysts for Zn-Air Batteries

The development of green and environmentally friendly synthesis methods of electrocatalysts is a crucial aspect in decarbonizing energy generation. In this study, eco-friendly mechanochemical synthesis of perovskite metal oxide-carbon black composites is proposed using different conditions and additives such as KOH. Furthermore, the optimization of ball milling conditions, including time and rotational speed, is studied. The mechanochemical synthesis in solid-state conditions without additives produces electrocatalysts that exhibit the highest bifunctional electrochemical activity towards both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Moreover, this synthesis demonstrates a lower Environmental Impact Factor (E-factor), indicating its greener nature, and due to its simplicity, it has a great potential for scalability. The obtained bifunctional electrocatalysts have been tested in a rechargeable zinc-air battery (ZAB) for 22 h with similar performance compared to the commercial catalyst (Pt/C) at significantly lower cost. These promising findings are attributed to the enhanced interaction between the perovskite metal oxide and carbon material and the improved dispersion of the perovskite metal oxide on the carbon materials.

Deconvoluting XPS Spectra of La-Containing Perovskites from First-Principles

Perovskite-based oxides are used in electrochemical CO2 and H2O reduction in electrochemical cells due to their compositional versatility, redox properties, and stability. However, limited knowledge exists on the mechanisms driving these processes. Toward this understanding, herein we probe the core level binding energy shifts of water-derived adspecies (H, O, OH, H2O) as well as the adsorption of CO2 on LaCoO3 and LaNiO3 and correlate the simulated peaks with experimental temperature-programmed X-ray photoelectron spectroscopy (TPXPS) results. We find that the strong adsorption of such chemical species can affect the antiferromagnetic ordering of LaNiO3. The adsorption of such adspecies is further quantified through Bader and differential charge analyses. We find that the higher O 1s core level binding energy peak for both LaCoO3 and LaNiO3 corresponds to adsorption of water-related species and CO2, while the lower energy peak is due to lattice oxygen. We further correlate these density functional theory-based core level O 1s binding energies with the TPXPS measurements to quantify the decrease of the O 1s contribution due to desorption of adsorbates and the apparent increase of the lattice oxygen (both bulk and surface) with temperature. Finally, we quantify the influence of adsorbates on the La 4d, Co 2p, and the Ni 3p core level binding energy shifts. This work demonstrates how theoretically generated XPS data can be utilized to predict species-specific binding energy shifts to assist in deconvolution of the experimental results.

Enhancing Interaction between Lanthanum Manganese Cobalt Oxide and Carbon Black through Different Approaches for Primary Zn-Air Batteries

Due to the need for decarbonization in energy generation, it is necessary to develop electrocatalysts for the oxygen reduction reaction (ORR), a key process in energy generation systems such as fuel cells and metal-air batteries. Perovskite-carbon material composites have emerged as active and stable electrocatalysts for the ORR, and the interaction between both components is a crucial aspect for electrocatalytic activity. This work explores different mixing methods for composite preparation, including mortar mixing, ball milling, and hydrothermal and thermal treatments. Hydrothermal treatment combined with ball milling resulted in the most favorable electrocatalytic performance, promoting intimate and extensive contact between the perovskite and carbon material and improving electrocatalytic activity. Employing X-ray photoelectron spectroscopy (XPS), an increase in the number of M-O-C species was observed, indicating enhanced interaction between the perovskite and the carbon material due to the adopted mixing methods. This finding was further corroborated by temperature-programmed reduction (TPR) and temperature-programmed desorption (TPD) techniques. Interestingly, the ball milling method results in similar performance to the hydrothermal method in the zinc-air battery and, thus, is preferable because of the ease and straightforward scalability of the preparation process.

Resistive Avalanches in La1-xSrxCoO3-δ (x = 0, 0.3) Thin Films and Their Reversible Evolution by Tuning Lattice Oxygen Vacancies (δ)

Strong correlations are often manifested by exotic electronic phases and phase transitions. LaCoO3-δ (LCO) is a system that exhibits such strong electronic correlations with lattice-spin-charge-orbital degrees of freedom. Here, we show that mesoscopic oxygen-deficient LCO films show resistive avalanches of about 2 orders of magnitude due to the metal-insulator transition (MIT) of the film at about 372 K for the 25 W RF power-deposited LCO film on the Si/SiO2 substrate. In bulk, this transition is otherwise gradual and occurs over a very large temperature range. In thin films of LCO, the oxygen deficiency (0 < δ < 0.5) is more easily reversibly tuned, resulting in avalanches. The avalanches disappear after vacuum annealing, and the films behave like normal insulators (δ ∼0.5) with Co2+ in charge ordering alternatively with Co3+. This oxidation state change induces spin state crossovers that result in a spin blockade in the insulating phase, while the conductivity arises from hole hopping among the allowed cobalt Co4+ ion spin states at high temperature. The chemical pressure (strain) of 30% Sr2+ doping at the La3+ site results in reduction in the avalanche magnitude as well as their retention in subsequent heating cycles. The charge nonstoichiometry arising due to Sr2+ doping is found to contribute toward hole doping (i.e., Co3+ oxidation to Co4+) and thereby the retention of the hole percolation pathway. This is also manifested in energies of crossover from the 3D variable range hopping (VRH) type transport observed in the temperature range of 300-425 K, while small polaron hopping (SPH) is observed in the temperature range of 600-725 K for LCO. On the other hand, Sr-doped LCO does not show any crossover and only the VRH type of transport. The strain due to Sr2+ doping refrains the lattice from complete conversion of δ going to 0.5, retaining the avalanches.

A facile coprecipitation approach for synthesizing LaNi0.5Co0.5O3 as the cathode for a molten-salt lithium-oxygen battery

The cathode of a lithium-oxygen battery (LOB) should be well designed to deliver high catalytic activity and long stability, and to provide sufficient space for accommodating the discharge product. Herein, a facile coprecipitation approach is employed to synthesize LaNi0.5Co0.5O3 (LNCO) perovskite oxide with a low annealing temperature. The assembled LOB exhibits superior electrochemical performance with a low charge overpotential of 0.03-0.05 V in the current density range of 0.1-0.5 mA cm-2. The battery ran stably for 119 cycles at a high coulombic efficiency. The superior performance is ascribed to (i) the high catalytic activity of LNCO towards oxygen reduction/evolution reactions; (ii) the increased temperature enabling fast kinetics; and (iii) the LiNO3-KNO3 molten salt enhancing the stability of the LOB operating at high temperature.

Activating Mn Sites by Ni Replacement in α-MnO2

Transition metal oxides are characterized by an acute structure and composition dependent electrocatalytic activity toward the oxygen evolution (OER) and oxygen reduction (ORR) reactions. For instance, Mn containing oxides are among the most active ORR catalysts, while Ni based compounds tend to show high activity toward the OER in alkaline solutions. In this study, we show that incorporation of Ni into α-MnO2, by adding Ni precursor into the Mn-containing hydrothermal solution, can generate distinctive sites with different electronic configurations and contrasting electrocatalytic activity. The structure and composition of the Ni modified hollandite α-MnO2 phase were investigated by X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), transmission electron microscopy coupled to energy-dispersive X-ray spectroscopy (TEM-EDX), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and X-ray photoelectron spectroscopy (XPS). Our analysis suggests that Mn replacement by Ni into the α-MnO2 lattice (site A) occurs up to approximately 5% of the total Mn content, while further increasing Ni content promotes the nucleation of separate Ni phases (site B). XAS and XRD show that the introduction of sites A and B have a negligible effect on the overall Mn oxidation state and bonding characteristics, while very subtle changes in the XPS spectra appear to suggest changes in the electronic configuration upon Ni incorporation into the α-MnO2 lattice. On the other hand, changes in the electronic structure promoted by site A have a significant impact in the pseudocapacitive responses obtained by cyclic voltammetry in KOH solution at pH 13, revealing the appearance of Mn 3d orbitals at the energy (potential) range relevant to the ORR. The evolution of Mn 3d upon Ni replacement significantly increases the catalytic activity of α-MnO2 toward the ORR. Interestingly, the formation of segregated Ni phases (site B) leads to a decrease in the ORR activity while increasing the OER rate.

Transition metal oxides with perovskite and spinel structures for electrochemical energy production applications

Transition metal oxide-based materials are an interesting alternative to substitute noble-metal based catalyst in energy conversion devices designed for oxygen reduction (ORR), oxygen evolution (OER) and hydrogen evolution reactions (HER). Perovskite (ABO₃) and spinel (AB₂O₄) oxides stand out against other structures due to the possibility of tailoring their chemical composition and, consequently, their properties. Particularly, the electrocatalytic performance of these materials depends on features such as chemical composition, crystal structure, nanostructure, cation substitution level, e_g orbital filling or oxygen vacancies. However, they suffer from low electrical conductivity and surface area, which affects the catalytic response. To mitigate these drawbacks, they have been combined with carbon materials (e.g. carbon black, carbon nanotubes, activated carbon, and graphene) that positively influence the overall catalytic activity. This review provides an overview on tunable perovskites (mainly lanthanum-based) and spinels featuring 3d metal cations such as Mn, Fe, Co, Ni and Cu on octahedral sites, which are known to be active for the electrochemical energy conversion.

Electrocatalytic activity of calcined manganese ferrite solid nanospheres in the oxygen reduction reaction

In this study, we synthesized MnFe₂O₄ solid nanospheres (MSN) calcined at different temperatures (200-500 °C) and MSN-based materials mixed with carbon black, for their use as electrocatalysts in the oxygen reduction reaction (ORR) in alkaline medium (0.1 M KOH). It was demonstrated that the calcination temperature of MSN material determined its chemical surface composition and microstructure and it had an important effect on the electrocatalytic properties for ORR, which in turn was reflected in the performance of MSN/CB-based electrocatalysts. The study revealed that the presence of Mn species plays a key role in the ORR activity. Among tested, MSN200/CB and MSN350/CB exhibited the best electrochemical performances together with outstanding stability.

Tailoring electrocatalytic activity of in situ crafted perovskite oxide nanocrystals via size and dopant control

Perovskite oxides (ABO3) have been widely recognized as a class of promising noble-metal-free electrocatalysts due to their unique compositional flexibility and structural stability. Surprisingly, investigation into their size-dependent electrocatalytic properties, in particular barium titanate (BaTiO3), has been comparatively few and limited in scope. Herein, we report the scrutiny of size- and dopant-dependent oxygen reduction reaction (ORR) activities of an array of judiciously designed pristine BaTiO3 and doped BaTiO3 (i.e., La- and Co-doped) nanoparticles (NPs). Specifically, a robust nanoreactor strategy, based on amphiphilic star-like diblock copolymers, is employed to synthesize a set of hydrophobic polymer-ligated uniform BaTiO3 NPs of different sizes (≤20 nm) and controlled compositions. Quite intriguingly, the ORR activities are found to progressively decrease with the increasing size of BaTiO3 NPs. Notably, La- and Co-doped BaTiO3 NPs display markedly improved ORR performance over the pristine counterpart. This can be attributed to the reduced limiting barrier imposed by the formation of -OOH species during ORR due to enhanced adsorption energy of intermediates and the possibly increased conductivity as a result of change in the electronic states as revealed by our density functional theory-based first-principles calculations. Going beyond BaTiO3 NPs, a variety of other ABO3 NPs with tunable sizes and compositions may be readily accessible by exploiting our amphiphilic star-like diblock copolymer nanoreactor strategy. They could in turn provide a unique platform for both fundamental and practical studies on a suite of physical properties (dielectric, piezoelectric, electrostrictive, catalytic, etc.) contingent upon their dimensions and compositions.

Improved Catalytic Activity of the High-Temperature Water Gas Shift Reaction on Metal-Exsolved La0.9Ni0.05Fe0.95O3 by Controlling Reduction Time

The catalyst exsolved from nickel-doped perovskite oxide, La0.9Ni0.05Fe0.95O3, has been proven to be effective for gas-phase reactions. To obtain the optimum amount of exsolved nanoparticles from the parent perovskite oxide, control of the reduction treatment condition is vital. Here, the effect of reduction time on the exsolved nanoparticle distribution, and thus the catalytic activity of the high-temperature water gas shift reaction (WGSR), was investigated. Upon conducting a wide range of characterizations, we assumed that the exsolution process might be a two-step process. Firstly, the surface oxygen is extracted. Secondly, due to the unstable perovskite structure, the Ni ions in the bulk La0.9Ni0.05Fe0.95O3 continuously diffuse toward the surface and, as the reduction progresses, more nuclei are generated to form a greater number of nanoparticles. This assumption is proven by the fact that, with an increase in the exsolution treatment time, the population of exsolution nanoparticles increases. Moreover, as the reduction time increases, the high-temperature WGSR activity also increases. The temperature-programmed measurements suggest that the exsolved nanoparticles are the active reaction sites. We believe that this study is helpful for understanding exsolution behavior during reduction treatment and, thus, developing a perovskite exsolution catalyst for the WGSR.

Strained Ultralong Silver Nanowires for Enhanced Electrocatalytic Oxygen Reduction Reaction in Alkaline Medium

Many noble metals are efficient catalysts for oxygen reduction reaction (ORR), including silver (Ag). Among all these noble metals, Ag is the most affordable because of its relative abundance. Surface energy has been proven to play a crucial role in the catalytic process, and straining is an effective operation to raise the surface energy over electrocatalysts. In this work, sonication was utilized to induce strain in Ag nanowires (NWs) through lattice deformation. A 0.18 J/m² improvement of the surface energy around the stacking faults area has been calculated via density functional theory. The diffusion-limiting current density was evaluated and increases by >20% (from -4.98 to -6.00 mA/cm²) after sonication straining. Meanwhile, the onset potential remains almost constant (i.e., 0.95 V vs RHE). The results show that induction of strain has a strong impact on the diffusion-limiting current density and significantly improves the ORR catalytic performance of Ag NWs.

Carbon Material and Cobalt-Substitution Effects in the Electrochemical Behavior of LaMnO3 for ORR and OER

LaMn_1−xCo_xO₃ perovskites were synthesized by a modified sol-gel method which incorporates EDTA. These materials’ electrochemical activity towards both oxygen reduction (ORR) and oxygen evolution reactions (OER) was studied. The cobalt substitution level determines some physicochemical properties and, particularly, the surface concentration of Co and Mn’s different oxidation states. As a result, the electroactivity of perovskite materials can be tuned using their composition. The presence of cobalt at low concentration influences the catalytic activity positively, and better bifunctionality is attained. As in other perovskites, their low electrical conductivity limits their applicability in electrochemical devices. It was found that the electrochemical performance improved significantly by physically mixing with a mortar the active materials with two different carbon black materials. The existence of a synergistic effect between the electroactive component and the carbon material was interpreted in light of the strong carbon–oxygen–metal interaction. Some mixed samples are promising electrocatalysts towards both ORR and OER.

Promoting Active Electronic States in LaFeO3 Thin-Films Photocathodes via Alkaline-Earth Metal Substitution

The effects of alkaline-earth metal cation (AMC; Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺) substitution on the photoelectrochemical properties of phase-pure LaFeO₃ (LFO) thin-films are elucidated by X-ray photoemission spectroscopy (XPS), X-ray diffraction (XRD), diffuse reflectance, and electrochemical impedance spectroscopy (EIS). XRD confirms the formation of single-phase cubic LFO thin films with a rather complex dependence on the nature of the AMC and extent of substitution. Interestingly, subtle trends in lattice constant variations observed in XRD are closely correlated with shifts in the binding energies of Fe 2p_3/2 and O 1s orbitals associated with the perovskite lattice. We establish a scaling factor between these two photoemission peaks, unveiling key correlation between Fe oxidation state and Fe-O covalency. Diffuse reflectance shows that optical transitions are little affected by AMC substitution below 10%, which are dominated by a direct bandgap transition close to 2.72 eV. Differential capacitance data obtained from EIS confirm the p-type characteristic of pristine LFO thin-films, revealing the presence of sub-bandgap electronic state (A-states) close to the valence band edge. The density of A-states is decreased upon AMC substitution, while the overall capacitance increases (increase in dopant level) and the apparent flat-band potential shifts toward more positive potentials. This behavior is consistent with the change in the valence band photoemission edge. In addition, capacitance data of cation-substituted films show the emergence of deeper states centered around 0.6 eV above the valence band edge (B-states). Photoelectrochemical responses toward the hydrogen evolution and oxygen reduction reactions in alkaline solutions show a complex dependence on alkaline-earth metal incorporation, reaching incident-photon-to-current conversion efficiency close to 20% in oxygen saturated solutions. We rationalize the photoresponses of the LFO films in terms of the effect sub-bandgap states on majority carrier mobility, charge transfer, and recombination kinetics.

Reversible perovskite electrocatalysts for oxygen reduction/oxygen evolution

Reversible (bi-functional) ORR/OER electrocatalysts identified with the creation of mixed valent Mn perovskites and the Mn³⁺/Mn⁴⁺ surface redox couple.

The identification of electrocatalysts mediating both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are prerequisite for the development of reversible fuel cells and rechargeable metal–air batteries. The question remains as to whether a bifunctional catalyst, or a single catalyst site, will exhibit potentials converging to +1.23 V_RHE. Transition metal-based perovskites provide tunable catalysts where site substitution can influence both ORR and OER, however substitution in the pseudo-binary phases results in an anti-correlation in ORR and OER activities. We reveal that La_xMn_yNi_1–yO_3–δ, compositions with lanthanum A-site sub-stoichiometry exhibit reversible activity correlating with the appearance of the Mn³⁺/Mn⁴⁺ redox couple. The Mn³⁺/Mn⁴⁺ couple is associated with Mn⁴⁺ co-existing with Mn³⁺ in the bulk, as La³⁺ is substituted by Ni²⁺ at the A-site to create a mixed valent system. We also show that a direct A-site substitution by the Ca²⁺ cation in La_xCa_1–xMn_yO_3–δ perovskites also results in the creation of Mn⁴⁺, the appearance of the Mn³⁺/Mn⁴⁺ redox couple, and a concomitant reversible activity. These results highlight a general strategy of optimizing oxide electrocatalysts with reversible activity.

Oxygen Reduction Reaction Electrocatalysis in Alkaline Electrolyte on Glassy-Carbon-Supported Nanostructured Pr6O11 Thin-Films

In this work, hierarchical nanostructured Pr6O11 thin-films of brain-like morphology were successfully prepared by electrostatic spray deposition (ESD) on glassy-carbon substrates. These surfaces were used as working electrodes in the rotating disk electrode (RDE) setup and characterized in alkaline electrolyte (0.1 M NaOH at 25 ± 2 °C) for the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER), and the oxygen reduction reaction (ORR) for their potential application in alkaline electrolyzers or in alkaline fuel cells. The electrochemical performances of these electrodes were investigated as a function of their crystallized state (amorphous versus crystalline). Although none of the materials display spectacular HER and OER activity, the results show interesting performances of the crystallized sample towards the ORR with regards to this class of non-Pt group metal (non-PGM) electrocatalysts, the activity being, however, still far from a benchmark Pt/C electrocatalyst.

Effect of Ba Content on the Activity of La1-x Ba x MnO3 Towards the Oxygen Reduction Reaction

The electrocatalytic activity of La1-x Ba x MnO3 nanoparticles towards the oxygen reduction reaction (ORR) is investigated as a function of the A-site composition. Phase-pure oxide nanoparticles with a diameter in the range of 40 to 70 nm were prepared by using an ionic liquid route and deposited onto mesoporous carbon films. The structure and surface composition of the nanoparticles are probed by XRD, TEM, EDX, and XPS. Electrochemical studies carried out under alkaline conditions show a strong correlation between the activity of La1-x Ba x MnO3 and the effective number of reducible Mn sites at the catalysts layer. Our analysis demonstrates that, beyond controlling particle size and surface elemental segregation, understanding and controlling Mn coordination at the first atomic layer is crucial for increasing the performance of these materials.

AMnO3 (A = Sr, La, Ca, Y) Perovskite Oxides as Oxygen Reduction Electrocatalysts

A series of perovskite-type manganites AMnO3 (A = Sr, La, Ca and Y) particles were investigated as electrocatalysts for the oxygen reduction reaction. AMnO3 materials were synthesized by means of an ionic-liquid method, yielding phase pure particles at different temperatures. Depending on the calcination temperature, particles with mean diameter between 20 and 150 nm were obtained. Bulk versus surface composition and structure are probed by X-ray photoelectron spectroscopy and extended X-ray absorption fine structure. Electrochemical studies were performed on composite carbon-oxide electrodes in alkaline environment. The electrocatalytic activity is discussed in terms of the effective Mn oxidation state, A:Mn particle surface ratio and the Mn-O distances.

Perovskite Electrocatalysts for the Oxygen Reduction Reaction in Alkaline Media

Oxygen reduction is considered a key reaction for electrochemical energy conversion but slow kinetics hamper application in fuel cells and metal-air batteries. In this review, the prospect of perovskite oxides for the oxygen reduction reaction (ORR) in alkaline media is reviewed with respect to fundamental insight into activity and possible mechanisms. For gaining these insights, special emphasis is placed on highly crystalline perovskite films that have only recently become available for electrochemical interrogation. The prospects for applications are evaluated based on recent progress in the synthesis of perovskite nanoparticles. The review concludes with the current understanding of oxygen reduction on perovskite oxides and a perspective on opportunities for future fundamental and applied research.

La1−xAgxMnO3 electrocatalyst with high catalytic activity for oxygen reduction reaction in aluminium air batteries

Ag doping is one of the best methods for improving the catalytic activity of LaMnO₃ perovskites, and the mass specific activity of LAM-30 (La_0.7Ag_0.3MnO₃) can reach 48.0 mA mg⁻¹ which is about 32 times that of LAM-0 (LaMnO₃).

Oxygen reduction reaction at LaxCa1−xMnO3 nanostructures: interplay between A-site segregation and B-site valency

Detailed surface vs. bulk composition studies of La_xCa_1−xMnO₃ oxides provide clear evidence that the ORR activity increases as the effective electron population at the Mn site increases.