Preparation of Silver-Modified Nickel Foams by Galvanic Displacement and Their Use as Cathodes for the Reductive Dechlorination of Herbicides

Three-dimensional structured electrode for electrocatalytic organic wastewater purification: Design, mechanism and role

Considering the growing need in decentralized water treatment, the application of electrocatalytic processes (EP) to achieve organic wastewater purification will be dominant in the near future due to high efficiency, small reactor assembly as well as the flexibility of operation and management. The catalytic performance of electrode materials determines the development of this technology. Among them, the unique three-dimensional (3D) structure electrode shows better performance than two-dimensional (2D) electrode in increasing mass transfer, enhancing adsorption and exposing more active sites. Hence, this review starts with the introduction of definition, classification, advantages and disadvantages of 3D electrode materials. Then a critical discussion on the design and construction of 3D electrode materials for organic wastewater purification application is provided. Next, the removal mechanism of organic pollutants on the surface of 3D electrode, the role of 3D structure, the design of reactor with 3D electrode, the conversion and toxicity of degradation products, electrode energy efficiency, stability and cost, are comprehensively reviewed. At last, current challenges and future perspectives for the development of 3D electrode materials are addressed. We deem that this review will provide a valuable insight into the design and application of 3D electrodes in environmental water purification.

Removal of Iodine-Containing X-ray Contrast Media from Environment: The Challenge of a Total Mineralization

Iodinated X-ray contrast media (ICM) as emerging micropollutants have attracted considerable attention in recent years due to their high detected concentration in water systems. It results in environmental issues partly due to the formation of toxic by-products during the disinfection process in water treatment. Consequently, various approaches have been investigated by researchers in order to achieve ICM total mineralization. This review discusses the different methods that have been used to degrade them, with special attention to the mineralization yield and to the nature of formed by-products. The problem of pollution by ICM is discussed in the first part dedicated to the presence of ICM in the environment and its consequences. In the second part, the processes for ICM treatment including biological treatment, advanced oxidation/reductive processes, and coupled processes are reviewed in detail. The main results and mechanisms involved in each approach are described, and by-products identified during the different treatments are listed. Moreover, based on their efficiency and their cost-effectiveness, the prospects and process developments of ICM treatment are discussed.

Versatile Tools for Understanding Electrosynthetic Mechanisms

Electrosynthesis is a popular, green alternative to traditional organic methods. Understanding the mechanisms is not trivial yet is necessary to optimize reaction processes. To this end, a multitude of analytical tools is available to identify and quantitate reaction products and intermediates. The first portion of this review serves as a guide that underscores electrosynthesis fundamentals, including instrumentation, electrode selection, impacts of electrolyte and solvent, cell configuration, and methods of electrosynthesis. Next, the broad base of analytical techniques that aid in mechanism elucidation are covered in detail. These methods are divided into electrochemical, spectroscopic, chromatographic, microscopic, and computational. Technique selection is dependent on predicted reaction pathways and electrogenerated intermediates. Often, a combination of techniques must be utilized to ensure accuracy of the proposed model. To conclude, future prospects that aim to enhance the field are discussed.

Electrochemical Processes Coupled to a Biological Treatment for the Removal of Iodinated X-ray Contrast Media Compounds

Iodinated X-ray contrast media (ICM) compounds are a form of intravenous radiocontrast containing iodine, which are rapidly eliminated via urine or feces. The issue with the accumulation of ICM has received considerable critical attention since they are ubiquitously distributed in municipal wastewater effluents and in the aquatic environment and are not significantly eliminated by most biological sewage treatment processes. Among the methods that have been tested to eliminate ICM, electrochemical methods have significant advantages, since they can selectively cut the carbon-iodine bonds that are suspected to decrease their biodegradability. On the production sites, the recovery of iodine ions due to the carbon-iodine cleavage can be envisaged, which is particularly interesting to reduce the cost of the ICM production process. The coupling of an electrochemical process and a biological treatment can be carried out to mineralize the organic part of the formed by-products, allowing the recovery of the iodide ions. Therefore, the degradation of diatrizoate, a typical ionic ICM compound, by an electrochemical process was the purpose of this study. The electrochemical reduction of diatrizoate was performed using a flow cell with a graphite felt electrode at different potentials. The removal yield of diatrizoate reached ~100% in 2 h and the main product, 3,5-diacetamidobenzoic acid, was quantitatively formed, showing that diatrizoate was almost completely deiodinated. According to the BOD₅/COD ratio, the biodegradability of diatrizoate after electrolysis was considerably improved. Cyclic voltammetry analysis of the electroreduced solution showed several oxidation peaks. The electrochemical oxidation of the by-products formed after the first treatment by electroreduction was then performed at three different potentials to study the influence of electrochemical oxidation on biodegradability. Results showed that the degradation yield of the deiodinated by-products increased with the potential and reached 100% at 1.3 V/SCE. Four different biological treatments were implemented during 21 days in stirred flasks with fresh activated sludge. The evolution of the mineralization during the biological treatment highlighted the biorecalcitrance of diatrizoate as previously estimated by the BOD₅/COD ratio. Interestingly, the mineralization yield increased from 41 to 60% when electrochemical oxidation at 1.3 V/SCE was implemented after electroreduction.

Simplified synthesis of silver nanoparticles on graphene oxide and their applications in electrocatalysis

In this work the possibility of synthesizing in situ silver nanoparticles (AgNPs) on graphene oxide (GO) surfaces without commonly used additional reducing or alkalizing agents or increased temperature was investigated. Using diverse microscopic (atomic force microscopy, transmission electron microscopy) and spectroscopic methods, it was proved that very small AgNPs were formed on GO by simple incubation for 2 h in a mixture of GO dispersion and AgNO₃. The prepared nanomaterial (GO_Ag) was also assessed using electrochemical methods, and it exhibited electrochemical behavior similar to the GO_Ag nanomaterial prepared with a help of citric acid as a reducing agent. Furthermore, it was found that (i) the electrochemical reduction of the GO_Ag on the electrode surface decreased the voltammetric response even though this step increased the surface conductivity and (ii) GO_Ag can be employed for the sensing of chlorides with a detection limit of 79 μM and a linear range of up to 10 mM. It could also provide an electrochemical response toward the chloroacetanilide herbicide metazachlor. Hence, the reducing capabilities of GO were proved to be applicable for in situ synthesis of metal nanoparticles with the highest possible simplification, and the as-prepared nanomaterials could be employed for fabrication of different electrochemical sensors.

Efficient Dechlorination of α-Halocarbonyl and α-Haloallyl Pollutants by Electroreduction on Bismuth

The electrocatalytic activity of bismuth considered as a low-cost and green electrode material was studied in reductive dechlorination processes. Cyclic voltammetry analyses showed that the Bi electrode exhibited a high catalytic activity to reduce alachlor, a chlorinated herbicide, in the aqueous medium at different pH values. Bulk electrolyses were performed at different potentials and pH values. Alachlor was reduced in deschloroalachlor, its dechlorinated derivative, with a high selectivity (96%) and a current efficiency of 48%. The reductive dechlorination of other chlorinated compounds with an activated carbon atom was then studied, showing that the bismuth electrode catalyzed the electroreduction of chloroacetamides, α-halocarbonyl, and α-haloallyl pollutants. Cyclic voltammetry experiments allowed us to propose a mechanism explaining the high catalytic activity of bismuth to reduce these families of compounds.