Cobalt−Iron Pyrophosphate Porous Nanosheets as Highly Active Electrocatalysts for the Oxygen Evolution Reaction

Ammonia-assisted Ni particle preferential deposition in Ni-Fe pyrophosphates on iron foam to improve the catalytic performance for overall water splitting

Designing efficient and cost-effective electrocatalysts for overall water splitting remains a major challenge in hydrogen production. Herein, ammonia was introduced to pyrophosphate chelating solution assisted Ni particles preferential plating on porous Fe substrate to form coral-like Ni/NiFe-Pyro electrode. The pyrophosphate with multiple complex sites can couple with nickel and iron ions to form an integrated network structure, which also consists of metallic nickel due to the introduction of ammonia. The large network structure in Ni/NiFe-Pyro significantly enhances the synergistic effect between nickel and iron and then improves the electrocatalytic performance. As a result, the coral-like Ni/NiFe-Pyro@IF exhibits good electrocatalytic activity and stability for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The electrolyzer assembled with Ni/NiFe-Pyro@IF as cathode and anode just needs a low water-splitting voltage of 1.54 V to obtain the current density of 10 mA cm-2. Meanwhile, the stability test of Ni/NiFe-Pyro@IF is performed at the current densities ranging from 10 to 400 mA cm-2 for 50 h without any significant decay, indicating robust catalytic stability for overall water splitting. This strategy for synthesizing metal/metal pyrophosphate composites may provide a new avenue for future studies of efficient bifunctional electrocatalysts.

Electrochemically Reconstructed Vanadic Oxide-Doped Cobalt Pyrophosphate as an Electrocatalyst for the Oxygen Evolution Reaction

More and more attention has been paid to the development of the efficient electrocatalysts for the oxygen evolution reaction (OER). Herein, a porous vanadic oxide-doped cobalt pyrophosphate electrocatalyst, namely V₂O₅-Co₂P₂O₇, was exploited by using the electrochemical reconstruction method in the alkaline electrolyte and selecting a cobalt vanadium phosphate Co(H₂O)₄(VOPO₄)₂ as a precursor. The reconstructed vanadic oxide-doped cobalt pyrophosphate catalyst V₂O₅-Co₂P₂O₇ exhibited efficient electrocatalytic activity for the OER in 1.0 M KOH, requiring a low overpotential of 199 mV at 10 mA cm^-2, compared to the reported pyrophosphate electrocatalysts. The porous morphology and doping of vanadic oxide after electrochemical reconstruction were beneficial to enhance the electrocatalytic performance for the OER, through improving the surface area to bring in more accessibly active sites and regulating the electronic structures. The results provided a promising strategy to prepare the pyrophosphate electrocatalysts and improve the performance of the OER catalyst.

Nanocrystalline Iron Pyrophosphate-Regulated Amorphous Phosphate Overlayer for Enhancing Solar Water Oxidation

A rational regulation of the solar water splitting reaction pathway by adjusting the surface composition and phase structure of catalysts is a substantial approach to ameliorate the sluggish reaction kinetics and improve the energy conversion efficiency. In this study, we demonstrate a nanocrystalline iron pyrophosphate (Fe4(P2O7)3, FePy)-regulated hybrid overlayer with amorphous iron phosphate (FePO4, FePi) on the surface of metal oxide nanostructure with boosted photoelectrochemical (PEC) water oxidation. By manipulating the facile electrochemical surface treatment followed by the phosphating process, nanocrystalline FePy is localized in the FePi amorphous overlayer to form a heterogeneous hybrid structure. The FePy-regulated hybrid overlayer (FePy@FePi) results in significantly enhanced PEC performance with long-term durability. Compared with the homogeneous FePi amorphous overlayer, FePy@FePi can improve the charge transfer efficiency more significantly, from 60% of FePi to 79% of FePy@FePi. Our density-functional theory calculations reveal that the coexistence of FePi and FePy phases on the surface of metal oxide results in much better oxygen evolution reaction kinetics, where the FePi was found to have a typical down-hill reaction for the conversion from OH* to O2, while FePy has a low free energy for the formation of OH*.

Phytic acid assisted ultra-fast in-situ constructing Ni foam-supported amorphous Ni-Fe phytates to enhance catalytic performance for oxygen evolution reaction

It is important for the efficient and low-cost utilization of the clean energies to prepare robust catalytic electrodes for oxygen evolution reaction (OER, the key half-reaction in new energy conversion...

Recent Advances in Alkaline Exchange Membrane Water Electrolysis and Electrode Manufacturing

Water electrolysis to obtain hydrogen in combination with intermittent renewable energy resources is an emerging sustainable alternative to fossil fuels. Among the available electrolyzer technologies, anion exchange membrane water electrolysis (AEMWE) has been paid much attention because of its advantageous behavior compared to other more traditional approaches such as solid oxide electrolyzer cells, and alkaline or proton exchange membrane water electrolyzers. Recently, very promising results have been obtained in the AEMWE technology. This review paper is focused on recent advances in membrane electrode assembly components, paying particular attention to the preparation methods for catalyst coated on gas diffusion layers, which has not been previously reported in the literature for this type of electrolyzers. The most successful methodologies utilized for the preparation of catalysts, including co-precipitation, electrodeposition, sol-gel, hydrothermal, chemical vapor deposition, atomic layer deposition, ion beam sputtering, and magnetron sputtering deposition techniques, have been detailed. Besides a description of these procedures, in this review, we also present a critical appraisal of the efficiency of the water electrolysis carried out with cells fitted with electrodes prepared with these procedures. Based on this analysis, a critical comparison of cell performance is carried out, and future prospects and expected developments of the AEMWE are discussed.

Design Strategies of Transition-Metal Phosphate and Phosphonate Electrocatalysts for Energy-Related Reactions

The key challenge to developing renewable energy conversion and storage devices lies in the exploration and rational engineering of cost-effective and highly efficient electrocatalysts for various energy-related electrochemical reactions. Transition-metal phosphates and phosphonates have shown remarkable performances for these reactions based on their unique physicochemical properties. Compared with transition-metal oxides, phosphate groups in transition-metal phosphates and phosphonates show flexible coordination with diverse orientations, making them an ideal platform for designing active electrocatalysts. Although numerous efforts have been spent on the development of transition-metal phosphate and phosphonate electrocatalysts, some urgent issues, such as low intrinsic catalytic efficiency and low electronic conductivity, have to be resolved in accordance with their applications. In this Review, we focus on the design strategies of highly efficient transition-metal phosphate and phosphonate electrocatalysts, with special emphasis on the tuning of transition-metal-center coordination environment, optimization of electronic structures, increase of catalytically active site densities, and construction of heterostructures. Guided by these strategies, recently developed transition-metal phosphate and phosphonate materials have exhibited excellent activity, selectivity, and stability for various energy-related electrocatalytic reactions, showing great potential for replacing noble-metal-based catalysts in next-generation advanced energy techniques. The existing challenges and prospects regarding these materials are also presented.

Na4Ni3P4O15-Ni(OH)2 core-shell nanoparticles as hybrid electrocatalysts for the oxygen evolution reaction in alkaline electrolytes

There is wide interest in developing efficient, robust and low-cost electrode materials for the electrolysis of water to produce clean hydrogen fuel. It is especially important to improve the performance and durability of electrocatalysts for the OER. Here we have shown that the transformation of nanoparticle (n-NNP) and crystalline (c-NNP) forms of mixed phosphate Na4Ni3(PO4)2P2O7 in highly alkaline solutions occurs along various routes and provokes the generation of 2D Ni(OH)2 nanosheets or stable core(phosphate)-shell(Ni(OH)2) particles, respectively. In both cases, in the carbon matrix (through chemical and electrochemical conversion of phosphate in situ during electrolysis in a 6 M KOH or NaOH solution) stable OER electrocatalysts with low overpotentials of 250-290 mV at a current density of 10 mA cm-2 were obtained. The best candidate for the OER process is core-shell particles, which maintain overpotentials of around 250 mV in 6 M KOH for more than 3 days. The activity enhancement can be attributed to the formation of abundant NiOOH nanoparticles on the shell surface due to improved lattice matching. This report discusses future prospects for the creation of core-shell particles to reduce the overpotential of durable electrocatalysts for the OER.

3D Networks of CoFePi with Hierarchical Porosity for Effective OER Electrocatalysis

A series of amorphous 3D Co-based phosphate networks with hierarchical porosity, including the CoPi, the binary CoM₁ Pi and the trinary CoM₁ M₂ Pi (M_i  = Ni^II , Fe^III , Ce^III ) are produced via a novel bitemplate coprecipitation approach at room temperature. Interestingly, the integration of Fe^III and Co^II in the same network is found to significantly influence both the porosity and the electronic state of Co^II . The CoFePi with a Fe^III to Co^II mole ratio of 0.91 has a specific surface area of 170 m² g^-1 and average pore size of 12.3 nm, larger than those of the CoPi network; furthermore, the Co^II within such CoFePi exhibits a higher oxidation state than that in the CoPi. Due to such structural and compositional merits, the binary CoFePi network shows superior oxygen evolution reaction (OER) electrocatalytic activity, which gives an overpotential as low as 0.315 V at 10 mA cm^-2 and a Tafel slope of 33 mV dec^-1 in 0.10 m KOH. Additionally, the trinary CoFeNiPi demonstrates similar OER catalytic performance. The two phosphate networks also exhibit remarkable catalytic stability. In view of their easy preparation, superior activity, high stability, and low cost, such transition metal phosphate networks are promising catalysts for practical OER processes.