Rare Earth Doping Engineering Tailoring Advanced Oxygen-Vacancy Co3 O4 with Tunable Structures for High-Efficiency Energy Storage

Co₃ O₄  with high theoretical capacitance is a promising electrode material for high-end energy applications, yet the unexcited bulk electrochemical activity, low conductivity, and poor kinetics of Co₃ O₄  lead to unsatisfactory charge storage capacity. For boosting its energy storage capability, rare earth (RE)-doped Co₃ O₄  nanostructures with abundant oxygen vacancies are constructed by simple, economical, and universal chemical precipitation. By changing different types of RE (RE = La, Yb, Y, Ce, Er, Ho, Nd, Eu) as dopants, the RE-doped Co₃ O₄  nanostructures can be well transformed from large nanosheets to coiled tiny nanosheets and finally to ultrafine nanoparticles, meanwhile, their specific surface area, pore distribution, the ratio of Co²⁺ /Co³⁺ , oxygen vacancy content, crystalline phase, microstrain parameter, and the capacitance performance are regularly affected. Notably, Eu-doped Co₃ O₄  nanoparticles with good cycle stability show a maximum specific capacitance of 1021.3 F g^-1 (90.78 mAh g^-1 ) at 2 A g^-1 , higher than 388 F g^-1 (34.49 mAh g^-1 ) of pristine Co₃ O₄  nanosheets. The assembling asymmetric supercapacitor delivers a high energy density of 48.23 Wh kg^-1  at high power density of 1.2 kW kg^-1 . These findings denote the significance and great potential of RE-doped Co₃ O₄  in the development of high-efficiency energy storage.

In Situ Growth of MnO2 Nanosheets on a Graphite Flake as an Effective Binder-Free Electrode for High-Performance Supercapacitors

In this work, manganese dioxide (MnO₂) nanosheets in situ loaded on a high-purity graphite flake (GF) were prepared by one-step hydrothermal deposition. It was found that the specific capacitance value of a single MnO₂/GF electrode was 882 F/g at a current density of 1.0 A/g in a KOH electrolyte, and the specific capacitance retention of the MnO₂/GF electrode can reach about 90.1% after 5000 charge-discharge cycles at a current density of 10 A/g. Furthermore, a MnO₂/GF∥MnO₂/GF symmetric supercapacitor device was fabricated with two pieces of MnO₂/GF electrodes and ordinary filter paper with a 1 M KOH/PVA gel electrolyte as a separator. The single symmetric device displayed a high energy density of 64.2 Wh/kg at a power density of 400 W/kg within an applied voltage of 1.6 V, and this value was superior to those of previously reported MnO₂-based systems. A tandem device consisting of a five-series tandem device (the applied voltage of a single device was 0.7 V) and a three-series tandem device (the applied voltage of a single device was 1.6 V) was prepared to drive a red light-emitting diode (LED). These findings open up application prospects for MnO₂-based composite electrode materials for high-performance supercapacitors.

Rare Earth-Based Nanomaterials for Supercapacitors: Preparation, Structure Engineering and Application

Supercapacitors (SCs) can effectively alleviate problems such as energy shortage and serious greenhouse effect. The properties of electrode materials directly affect the performance of SCs. Rare earth (RE) is known as "modern industrial vitamins", and their functional materials have been listed as key strategic materials. In the past few years, the number of scientific reports on RE-based nanomaterials for SCs has increased rapidly, confirming that adding RE elements or compounds to the host electrode materials with various nanostructured morphologies can greatly enhance their electrochemical performance. Although RE-based nanomaterials have made rapid progress in SCs, there are very few works providing a comprehensive survey of this field. In view of this, a comprehensive overview of RE-based nanomaterials for SCs is provided here, including the preparation methods, nanostructure engineering, compounds, and composites, along with their capacitance performances. The structure-activity relationships are discussed and highlighted. Meanwhile, the future challenges and perspectives are also pointed out. This Review can not only provide guidance for the further development of SCs but also arouse great interest in RE-based nanomaterials in other research fields such as electrocatalysis, photovoltaic cells, and lithium batteries.

A new neodymium-phosphine compound for supercapacitors with long-term cycling stability

A new neodymium-phosphine compound (Nd-(Ph)3P) was used for the first time as an electrode for supercapacitors and exhibited an extraordinary capacitance of 951 F g-1 at 0.5 A g-1 with a high capacitance retention of 96% after 10 000 cycles at 10 A g-1, which is the highest capacitance for rare earth based materials in SCs. Such an excellent performance might be due to the fact that this material can provide plenty of electron-active sites for charge storage and electrolyte diffusion can be efficiently promoted.

Uncovering the origin of enhanced field emission properties of rGO-MnO2 heterostructures: a synergistic experimental and computational investigation

The unique structural merits of heterostructured nanomaterials including the electronic interaction, interfacial bonding and synergistic effects make them attractive for fabricating highly efficient optoelectronic devices. Herein, we report the synthesis of MnO₂ nanorods and a rGO/MnO₂ nano-heterostructure using low-cost hydrothermal and modified Hummers' methods, respectively. Detailed characterization and confirmation of the structural and morphological properties are done via X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM). Compared to the isolated MnO₂ nanorods, the rGO/MnO₂ nano-heterostructure exhibits impressive field emission (FE) performance in terms of the low turn-on field of 1.4 V μm⁻¹ for an emission current density of 10 μA cm⁻² and a high current density of 600 μA cm⁻² at a relatively very low applied electric field of 3.1 V μm⁻¹. The isolated MnO₂ nanorods display a high turn-on field of 7.1 for an emission current density of 10 μA cm⁻² and a low current density of 221 μA cm⁻² at an applied field of 8.1 V μm⁻¹. Besides the superior FE characteristics of the rGO/MnO₂ nano-heterostructure, the emission current remains quite stable over the continuous 2 h period of measurement. The improvement of the FE characteristics of the rGO/MnO₂ nano-heterostructure can be ascribed to the nanometric features and the lower work function (6.01 and 6.12 eV for the rGO with 8% and 16% oxygen content) compared to the isolated α-MnO₂(100) surface (Φ = 7.22 eV) as predicted from complementary first-principles electronic structure calculations based on density functional theory (DFT) methods. These results suggest that an appropriate coupling of rGO with MnO₂ nanorods would have a synergistic effect of lowering the electronic work function, resulting in a beneficial tuning of the FE characteristics.

The unique structural merits of heterostructured nanomaterials including the electronic interaction, interfacial bonding and synergistic effects make them attractive for fabricating highly efficient optoelectronic devices.