Simultaneous Multiplex Potentiostatic Electroanalysis with Liquid-Junction-Removed Reference Electrode System using a Closed Bipolar Electrode

Energy harvesting from acid mine drainage using a highly proton/ion-selective thin polyamide film

A huge chemical potential difference exists between the acid mine drainage (AMD) and the alkaline neutralization solution, which is wasted in the traditional AMD neutralization process. This study reports, for the first time, the harvest of this chemical potential energy through a controlled neutralization of AMD using H+-conductive films. Polyamide films with controllable thickness achieved much higher H+ conductance than a commercially available cation exchange membrane (CEM). Meanwhile, the optimal polyamide film had an excellent H+/Ca2+ selectivity of 63.7, over two orders of magnitude higher than that of the CEM (0.3). The combined advantages of fast proton transport and high proton/ion selectivity greatly enhanced the power generation of the AMD battery. The power density was 3.1 W m-2, which is over one order of magnitude higher than that of the commercial CEM (0.2 W m-2). Our study provides a new sustainable solution to address the environmental issues of AMD while simultaneously enabling clean energy production.

On the mechanism of the bipolar reference electrode

Commercial silver/silver chloride (Ag/AgCl) reference electrodes are some of the most commonly used reference electrodes, but they suffer from a number of issues due to their porous frits. Such issues include difficulty miniaturizing, silver and chloride ion leakage, charge screening effects at low ionic strength, frit drying if left unattended in air, and incompatibility with organic solvents. To solve these issues, we recently designed a reference electrode that is leakless in principle by replacing the porous frit with a sealed, conductive wire, where the ends of the wire are exposed to the reference electrode solution and the working electrode solution. We hypothesized that the reference electrode operated like a closed, bipolar electrochemical cell, and we termed the name bipolar reference electrode (BPRE). Here, we provide evidence that the BPRE can either act as a reference electrode by operating through an ion transfer mechanism via leakage through the imperfect seal, or it can act as a highly stable quasi-reference electrode through a bipolar electron transfer mechanism (BPQRE). Finally, we demonstrate the effectiveness of the BPRE in other types of common electrochemical studies, including chronoamperometry, linear sweep voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy.

Wired Microfabricated Electrochemical Systems

Metal wires have been used as an alternative to liquid junctions for the connection of solutions in microfabricated electrochemical devices. They exhibit similar performance to liquid junctions, provided that the interfacial potentials at both ends of the wires were appropriately canceled. Cyclic voltammograms of devices with liquid junctions and metal wires were very similar when no current or a low current flowed through the metal wire between the working and reference electrodes. Iridium wires with iridium oxide at both ends facilitated canceling of the interfacial potentials at either end of the junction particularly well, and were used effectively for voltammetry, amperometry, and potentiometry by adjusting the pH of the solutions in the working and reference electrode compartments to be equal. This approach was used to effectively integrate a reliable common reference electrode between multiple working electrodes and to conduct automated electrochemical control of solution transport in microfluidic systems.

Leakless, Bipolar Reference Electrodes: Fabrication, Performance, and Miniaturization

Reference electrodes must maintain a well-defined potential for long periods of time to be useful. The silver/silver chloride (Ag/AgCl) reference electrode is arguably the most widely used reference electrode, but it leaks silver and chloride ions into the sample solution through the porous frit over time. Further, the porous frit makes miniaturization to the micro- and nanoscale challenging. Here, we present an alternative, where the traditional Ag/AgCl reference electrode porous frit is replaced by a conductive wire, preventing ion leakage and allowing miniaturization to the microscale. Charge balance is maintained through a closed bipolar electrochemical mechanism, where faradaic processes occur on each end of the sealed wire. Using the above design, we demonstrate the efficacy of the leakless, bipolar reference electrode (BPRE) and miniaturize it to the microscale (μ-leakless BPRE). Importantly, we demonstrate that leakless and μ-leakless BPREs behave the same as commercial reference electrodes during potentiometric measurements and leakless BPREs perform similarly during voltammetric measurements on ultramicroelectrodes. We demonstrate that the drift during voltammetry using a leakless BPRE on a macroelectrode is slightly more appreciable compared to the drift seen with a commercial reference electrode. We detail design principles for the use of leakless BPREs in nonaqueous solvents and in sealing other conductive materials (e.g., gold and carbon). Using mass spectrometry, we show that the maximum leakage of methylene blue is 0.36 fmol/s, at least 2 orders of magnitude smaller than that of commercial reference electrodes. Finally, we demonstrate the efficacy of using leakless BPREs in potentiometric glucose sensing.

Microfabricated electrochemical sensing devices

Electrochemistry provides possibilities to realize smart microdevices of the next generation with high functionalities. Electrodes, which constitute major components of electrochemical devices, can be formed by various microfabrication techniques, and integration of the same (or different) components for that purpose is not difficult. Merging this technique with microfluidics can further expand the areas of application of the resultant devices. To augment the development of next generation devices, it will be beneficial to review recent technological trends in this field and clarify the directions required for moving forward. Even when limiting the discussion to electrochemical microdevices, a variety of useful techniques should be considered. Therefore, in this review, we attempted to provide an overview of all relevant techniques in this context in the hope that it can provide useful comprehensive information.