Poly(Ionic Liquid)‐Based Composite Gel Electrolyte for Lithium Batteries

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

Nano-Confined Tin Oxide in Carbon Nanotube Electrodes via Electrostatic Spray Deposition for Lithium-Ion Batteries

The development of novel materials is essential for the next generation of electric vehicles and portable devices. Tin oxide (SnO₂), with its relatively high theoretical capacity, has been considered as a promising anode material for applications in energy storage devices. However, the SnO₂ anode material suffers from poor conductivity and huge volume expansion during charge/discharge cycles. In this study, we evaluated an approach to control the conductivity and volume change of SnO₂ through a controllable and effective method by confining different percentages of SnO₂ nanoparticles into carbon nanotubes (CNTs). The binder-free confined SnO₂ in CNT composite was deposited via an electrostatic spray deposition technique. The morphology of the synthesized and deposited composite was evaluated by scanning electron microscopy and high-resolution transmission electron spectroscopy. The binder-free 20% confined SnO₂ in CNT anode delivered a high reversible capacity of 770.6 mAh g^-1. The specific capacity of the anode increased to 1069.7 mAh g^-1 after 200 cycles, owing to the electrochemical milling effect. The delivered specific capacity after 200 cycles shows that developed novel anode material is suitable for lithium-ion batteries (LIBs).

Cation Vacancy-Boosted Lewis Acid-Base Interactions in a Polymer Electrolyte for High-Performance Lithium Metal Batteries

Polymer electrolytes have gained extensive attention owing to their high flexibility, easy processibility, intrinsic safety, and compatibility with current fabrication technologies. However, their low ionic conductivity and lithium transference number have largely impaired their real application. Herein, novel two-dimensional clay nanosheets with abundant cation vacancies are created and incorporated in a poly(ethylene oxide) (PEO)/poly(vinylidene fluoride-co-hexafluoropropylene)-blended polymer-based electrolyte. The characterization and simulation results reveal that the cation vacancies not only provide lithium ions with additional Lewis acid-base interaction sites but also protect the PEO chains from being oxidized by excess lithium ions, which enhances the dissociation of lithium salts and the hopping mechanism of lithium ions. Benefiting from this, the polymer electrolyte shows a high ionic conductivity of 2.6 × 10^-3 S cm^-1 at 27 °C, a large Li⁺ transference number up to 0.77, and a wide electrochemical stability window of 4.9 V. Furthermore, the LiFePO₄∥Li coin cell with such a polymer electrolyte delivers a high specific capacity of 145 mA h g^-1 with an initial Coulombic efficiency of 99.9% and a capacity retention of 97.3% after 100 cycles at ambient temperature, as well as a superior rate performance. When pairing with high-voltage cathodes LiCoO₂ and LiNi_0.5Mn_1.5O₄, the corresponding cells also exhibit favorable electrochemical stability and a high capacity retention. In addition, the LiFePO₄∥Li pouch cells display high safety even under rigorous conditions including corner-cut, bending, and nail-penetration.

Facile fabrication of robust gel poly(ionic liquid) electrolytes via base treatment at room temperature

This article reports a facile fabrication of robust gel poly(ionic liquid) electrolytes via base treatment.

Pyrrolidinium Containing Ionic Liquid Electrolytes for Li-Based Batteries

Ionic liquids are potential alternative electrolytes to the more conventional solid-state options under investigation for future energy storage solutions. This review addresses the utilization of IL electrolytes in energy storage devices, particularly pyrrolidinium-based ILs. These ILs offer favorable properties, such as high ionic conductivity and the potential for high power drain, low volatility and wide electrochemical stability windows (ESW). The cation/anion combination utilized significantly influences their physical and electrochemical properties, therefore a thorough discussion of different combinations is outlined. Compatibility with a wide array of cathode and anode materials such as LFP, V₂O₅, Ge and Sn is exhibited, whereby thin-films and nanostructured materials are investigated for micro energy applications. Polymer gel electrolytes suitable for layer-by-layer fabrication are discussed for the various pyrrolidinium cations, and their compatibility with electrode materials assessed. Recent advancements regarding the modification of typical cations such a 1-butyl-1-methylpyrrolidinium, to produce ether-functionalized or symmetrical cations is discussed.

Polymer electrolytes for metal-ion batteries

The results of studies on polymer electrolytes for metal-ion batteries are analyzed and generalized. Progress in this field of research is driven by the need for solid-state batteries characterized by safety and stable operation. At present, a number of polymer electrolytes with a conductivity of at least 10−4 S cm−1 at 25 °C were synthesized. Main types of polymer electrolytes are described, viz., polymer/salt electrolytes, composite polymer electrolytes containing inorganic particles and anion acceptors, and polymer electrolytes based on cation-exchange membranes. Ion transport mechanisms and various methods for increasing the ionic conductivity in these systems are discussed. Prospects of application of polymer electrolytes in lithium- and sodium-ion batteries are outlined.

The bibliography includes 349 references.

Sodium Batteries: A Review on Sodium-Sulfur and Sodium-Air Batteries

Lithium-ion batteries are currently used for various applications since they are lightweight, stable, and flexible. With the increased demand for portable electronics and electric vehicles, it has become necessary to develop newer, smaller, and lighter batteries with increased cycle life, high energy density, and overall better battery performance. Since the sources of lithium are limited and also because of the high cost of the metal, it is necessary to find alternatives. Sodium batteries have shown great potential, and hence several researchers are working on improving the battery performance of the various sodium batteries. This paper is a brief review of the current research in sodium-sulfur and sodium-air batteries.

Heat Pipe Thermal Management Based on High-Rate Discharge and Pulse Cycle Tests for Lithium-Ion Batteries

A battery thermal management system (BTMS) ensures that batteries operate efficiently within a suitable temperature range and maintains the temperature uniformity across the battery. A strict requirement of the BTMS is that increases in the battery discharge rate necessitate an increased battery heat dissipation. The advantages of heat pipes (HPs) include a high thermal conductivity, flexibility, and small size, which can be utilized in BTMSs. This paper experimentally examines a BTMS using HPs in combination with an aluminum plate to increase the uniformity in the surface temperature of the battery. The examined system with high discharge rates of 50, 75, and 100 A is used to determine its effects on the system temperature. The results are compared with those for HPs without fins and in ambient conditions. At a 100 A discharge current, the increase in battery temperature using the heat pipe with fins (HPWF) method is 4.8 °C lower than for natural convection, and the maximum temperature difference between the battery surfaces is 1.7 °C and 6.0 °C. The pulse circulation experiment was designed considering that the battery operates with a pulse discharge and temperature hysteresis. The depth of discharge is also considered, and the states-of-charge (SOC) values were 0.2, 0.5, and 0.8. The results of the two heat dissipation methods are compared, and the optimal heat dissipation structure is obtained by analyzing the experimental results. The results show that when the ambient temperature is 37 °C, differences in the SOC do not affect the battery temperature. In addition, the HPWF, HP, and natural convection methods reached stable temperatures of 40.8, 44.3, and the 48.1 °C, respectively the high temperature exceeded the battery operating temperature range.

Butyronitrile-Based Electrolytes for Fast Charging of Lithium-Ion Batteries

After determining the optimum composition of the butyronitrile: ethylene carbonate: fluoroethylene carbonate (BN:EC:FEC) solvent/co-solvent/additive mixture, the resulting electrolyte formulation (1M LiPF6 in BN:EC (9:1) + 3% FEC) was evaluated in terms of ionic conductivity and the electrochemical stability window, as well as galvanostatic cycling performance in NMC/graphite cells. This cell chemistry results in remarkable fast charging, required, for instance, for automotive applications. In addition, a good long-term cycling behavior lasts for 1000 charge/discharge cycles and improved ionic conductivity compared to the benchmark counterpart was achieved. XPS sputter depth profiling analysis proved the beneficial behavior of the tuned BN-based electrolyte on the graphite surface, by confirming the formation of an effective solid electrolyte interphase (SEI).