Shape‐Controlled Synthesis of NiCo 2 O 4 ‐rGO as Bifunctional Electrocatalyst for Zn‐Air Battery

Nanoflower-like NiCo2O4 Composite Graphene Oxide as a Bifunctional Catalyst for Zinc-Air Battery Cathode

Developing efficient bifunctional catalysts for nonprecious metal-based oxygen reduction (ORR) and oxygen evolution (OER) is crucial to enhance the practical application of zinc-air batteries. The study harnessed electrostatic forces to anchor the nanoflower-like NiCo2O4 onto graphene oxide, mitigating the poor inherent conductivity in NiCo2O4 as a transition metal oxide and preventing excessive agglomeration of the nanoflower-like structures during catalysis. Consequently, the resulting composite, NiCo2O4-GO/C, exhibited notably superior ORR and OER catalytic performance compared to pure nanoflower-like NiCo2O4. Notably, it excelled in OER catalytic activity of the OER relative to the precious metal RuO2. As a bifunctional catalyst for ORR and OER, NiCo2O4-GO/C displayed a potential difference of 0.88 V between the ORR half-wave potential and the OER potential at 10 mA·cm-2, significantly lower than the 1.08 V observed for pure flower-like NiCo2O4 and comparable to the 0.88 V exhibited by precious metal catalysts Pt/C + RuO2. The NiCo2O4-GO/C-based zinc-air battery demonstrated a discharge capacity of 817.3 mA h·g-1, surpassing that of precious metal-based zinc-air batteries. Moreover, charge-discharge cycling tests indicated the superior stability of the NiCo2O4-GO/C-based zinc-air battery compared to its precious metal-based counterparts.

Nitrogen-doped porous carbon encapsulates multivalent cobalt-nickel as oxygen reduction reaction catalyst for zinc-air battery

In this study, we present a bimetallic ion coexistence encapsulation strategy employing hexadecyl trimethyl ammonium bromide (CTAB) as a mediator to anchor cobalt-nickel (CoNi) bimetals in nitrogen-doped porous carbon cubic nanoboxes (CoNi@NC). The fully encapsulated and uniformly dispersed CoNi nanoparticles with the improved density of active sites help to accelerate the oxygen reduction reaction (ORR) kinetics and provide an efficient charge/mass transport environment. Zinc-air battery (ZAB) equipped CoNi@NC as cathode exhibits an open-circuit voltage of 1.45 V, a specific capacity of 870.0 mAh g^-1, and a power density of 168.8 mW cm^-2. Moreover, the two CoNi@NC-based ZABs in series display a stable discharge specific capacity of 783.0 mAh g^-1, as well as a large peak power density of 387.9 mW cm^-2. This work provides an effective way to tune the dispersion of nanoparticles to boost active sites in nitrogen-doped carbon structure, and enhance the ORR activity of bimetallic catalysts.

Controlled growth of porous oxygen-deficient NiCo2O4 nanobelts as high-efficiency electrocatalysts for oxygen evolution reaction

NiCo₂O₄ with a controlled oxygen vacancy concentration introduced by an Ar-annealing process greatly improved OER activity.

Defect Electrocatalysts and Alkaline Electrolyte Membranes in Solid-State Zinc-Air Batteries: Recent Advances, Challenges, and Future Perspectives

Rechargeable zinc-air batteries (ZABs) have attracted much attention due to their promising capability for offering high energy density while maintaining a long operational lifetime. One of the biggest challenges in developing all-solid-state ZABs is to design suitable bifunctional air-electrodes, which can efficiently catalyze the key oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) electrochemical processes. The other one is to develop robust electrolyte membranes with high ionic conductivity and superb water retention capability. In this review, an in-depth discussion of the challenges, mechanisms, and design strategies for the defect electrocatalyst and the electrolyte membrane in all-solid-state ZABs will be offered. In particular, the crucial defect engineering strategies to tune the ORR/OER catalysts are summarized, including direct controllable strategies: 1) atomically dispersed metal sites control, 2) vacancy defects control, and 3) lattice-strain control, and the indirect strategies: 4) crystallographic structure control and 5) metal-carbon support interaction control. Moreover, the most recent progress in designing electrolyte membranes, including polyvinyl alcohol-based membranes and gel polymer electrolyte membranes, is presented. Finally, the perspectives are proposed for rational design and fabrication of the desired air electrode and electrolyte membrane to improve the performance and prolong the lifetime of all-solid-state ZABs.

Three-Dimensional-Order Macroporous AB2O4 Spinels (A, B =Co and Mn) as Electrodes in Zn-Air Batteries

In this work, atomically substituted three-dimensionally ordered macroporous (3DOM) spinels based on Co and Mn (MnCo₂O₄ and CoMn₂O₄) were synthetized and used as cathodic electrocatalysts in a primary Zn-air battery. Scanning/transmission electron microscopy images show a 3DOM structure for both materials. Skeleton sizes of 114.4 and 140.8 nm and surface areas of 65.3 and 74.6 m² g^-1 were found for MnCo₂O₄ and CoMn₂O₄, respectively. The increase in surface area and higher presence of Mn³⁺ and Mn⁴⁺ species in the CoMn₂O₄ 3DOM material improved battery performance with a maximum power density of 101.6 mW cm^-2 and a specific capacity of 1440 mA h g^-1, which shows the highest battery performance reported to date using similar spinel materials. The stability performance of the electrocatalyst was evaluated in half-cell and battery cell systems, showing the higher durability of CoMn₂O₄, which was related to its better capability to perform the electrocatalytic process as adsorption, electron transfer, and desorption. It was found through density functional theory calculations that the CoMn₂O₄ spinel has a higher density of states in the Fermi level vicinity and better conductivity. Finally, the unique shape of 3DOM spinels promoted a high interaction between electroactive species and catalytic sites, making them suitable for oxygen reduction reaction applications.

The Effect of Heteroatom Doping on Nickel Cobalt Oxide Electrocatalysts for Oxygen Evolution and Reduction Reactions

The synthesis of nickel cobalt oxide materials and their electrocatalytic performance toward the oxygen reduction and evolution reactions are reported. Nickel cobalt oxides were synthesized in a sol-gel process with different precursors, namely nitrate, sulfate, and chloride. Structural analyses show that the structures have mesoporous morphologies and indicate the formation of nickel cobalt oxide spinel structures with a size ranging from 35 to 65 nm. Furthermore, the physicochemical properties differ depending on the nature of the selected precursors, including the materials' morphology and the chemical composition. Electrocatalytic investigations demonstrate that the catalytic activity toward the oxygen reduction reaction (ORR) could be modulated between two- and four-electron pathways, depending on the precursors used. The Cl-NiCoO sample displays a selective two-electron reduction of O₂ , with H₂ O₂ production higher than 90 %. The sample prepared using sulfate displays the highest performance toward the oxygen evolution reaction (OER), with a low overpotential value (0.34 V) to drive a current density of 10 mA.cm^-1 . Overall, these results confirm that the chemical composition of the precursor used during the nanomaterials synthesis can be used to tune the electrocatalytic performances toward ORR and OER.