Analytical Applications of Electrochemically Pretreated Boron‐Doped Diamond Electrodes

Biofouling and performance of boron-doped diamond electrodes for detection of dopamine and serotonin in neuron cultivation media

Boron doped diamond has been considered as a fouling-resistive electrode material for in vitro and in vivo detection of neurotransmitters. In this study, its performance in electrochemical detection of dopamine and serotonin in neuron cultivation media Neurobasal™ before and after cultivation of rat neurons was investigated. For differential pulse voltammetry the limits of detection in neat Neurobasal™ medium of 2 µM and 0.2 µM for dopamine and serotonin, respectively, were achieved on the polished surface, which is comparable with physiological values. On oxidized surface twofold higher values, but increased repeatabilities of the signals were obtained. However, in Neurobasal™ media with peptides-containing supplements necessary for cell cultivation, the voltammograms were notably worse shaped due to biofouling, especially in the medium isolated after neuron growth. In these complex media, the amperometric detection mode at +0.75 V (vs. Ag/AgCl) allowed to detect portion-wise additions of dopamine and serotonin (as low as 1-2 µM), mimicking neurotransmitter release from vesicles despite the lower sensitivity in comparison with neat NeurobasalTM. The results indicate substantial differences in detection on boron doped diamond electrode in the presence and absence of proteins, and the necessity of studies in real media for successful implementation to neuron-electrode interfaces.

Application of surfactants in the electrochemical sensing and biosensing of biomolecules and drug molecules

Realizing sensitive and efficient detection of biomolecules and drug molecules is of great significance. Among the detection methods that have been proposed, electrochemical sensing is favored for its outstanding advantages such as simple operation, low cost, fast response and high sensitivity. The unique structure and properties of surfactants have led to a wide range of applications in the field of electrochemical sensors and biosensors for biomolecules and drug molecules. Through the comparative analysis of reported works, this paper summarizes the application modes of surfactants in electrochemical sensors and biosensors for biomolecules and drug molecules, explores the possible electrocatalytic mechanism of their action, and looks forward to the development trend of their applications. This review is expected to provide some new ideas for subsequent related research work.

Simultaneous estimation of total phenolic and alkaloid contents in the tea samples by utilizing the catechin and caffeine oxidation signals through the square-wave voltammetry technique

This work outlines the simultaneous estimation of the total phenolic and alkaloid contents in the tea samples by using catechin (C) and caffeine (CAF) oxidation signals at a non-modified boron-doped diamond (BDD) electrode. Two irreversible oxidation peaks, about + 1.03 (for C) and + 1.45 V (for CAF) vs Ag/AgCl in acetate buffer solution at pH 4.7, were seen in the cyclic voltammetric profile of the binary mixtures of C and CAF. In optimal conditions and utilizing the square-wave mode, the BDD electrode allows for simultaneous quantification of C and CAF within the concentration ranges of 5.0-100.0 µg mL-1 (1.72 × 10-5 - 3.45 × 10-3 mol/L) and 1.0-50.0 µg mL-1 (5.15 × 10-6 - 2.57 × 10-4 mol/L) respectively. The corresponding detection limits are 1.22 µg mL-1 (4.21 × 10-6 mol/L) for C and 0.11 µg mL-1 (5.66 × 10-7 mol/L) for CAF. Other phenolic compounds (like tannic acid, gallic acid, epicatechin, and epigallocatechin gallate) and other alkaloids (theophylline and theobromine) present in tea samples were examined for selectivity assessment. Ultimately, the applicability of the proposed approach was demonstrated by estimating the total phenolic and alkaloid contents in the black and green tea samples, expressed as C and CAF equivalents. The results obtained were contrasted against those acquired using UV-Vis spectrometry.

Phosphate and Nitrate Electrochemical Sensor Based on a Bifunctional Boron-Doped Diamond Electrode

Phosphorus and nitrogen are important elements in both environmental cycles and biological growth, and their imbalance can lead to serious environmental and biological problems. It is important to be able to monitor the concentration of nitrate and phosphate in the water online. In this paper, a bifunctional boron-doped diamond (BDD) electrode with repeatable electrochemical renewal and modification ability has been developed and used as a shared working electrode for the determination of nitrate and phosphate. First, phosphate can be detected directly with a bare BDD electrode. After a thin copper (Cu) layer was electrodeposited on the BDD electrode, nitrate could be determined. The copper layer is then removed under a positive voltage, and the BDD electrode is renewed and can be used again for phosphate detection. This method enables the detection of both phosphate and nitrate while also improving the stability and repeatability through the renewal of the electrode surface. The segmented linear ranges for phosphate were 0.02-0.4 and 0.4-3 mg/L with a detection limit of 0.004 mg/L. The sensor detected nitrate in a wide concentration range, with segmented linear relationships in the ranges of 0.07-3 and 3-100 mg/L, with a detection limit of 0.065 mg/L. The electrochemical sensor based on the BDD electrode has a good reproducibility for phosphate and nitrate detection. The relative standard deviation (RSD) values of the current responses were 2.98, 2.79, 1.66, 1.81, and 1.23%, respectively, for 35 consecutive tests in 0.05, 0.2, 0.5, 1, and 1.5 mg/L phosphate solution. The RSD values of the current responses were 2.00, 0.97, and 1.03%, respectively, for 25 consecutive tests in 5, 7, and 10 mg/L nitrate solution.

An Interference-Free Voltammetric Method for the Detection of Sulfur Dioxide in Wine Based on a Boron-Doped Diamond Electrode and Reaction Electrochemistry

This paper describes a new, simple, and highly selective analytical technique for the detection of sulfur dioxide in wine, as a real sample with a relatively complicated matrix. The detection of the above analyte was based on the electrogeneration of iodine from iodide on a boron-doped diamond electrode, without modifications, in the presence of 0.1 mol dm-3 HClO4 as a supporting electrolyte. The electrogenerated iodine reacted with sulfur dioxide, forming iodide ions and sulfuric acid (i.e., a Bunsen reaction). The product of this reaction, the iodide ion, diffused back to the surface of the boron-doped diamond electrode and oxidized itself again. This chemical redox cycling enhanced the voltammetric response of the boron-doped diamond electrode. The selectivity of the determination was assured using NaOH and formaldehyde during sample preparation, and a blank was also measured and taken into account. The detection limit was estimated to be 10-6-10-7 mol dm-3. However, the content of sulfur dioxide in wine is significantly higher, which can lead to more accurate and reliable results.

Simultaneous Determination of Uric Acid and Caffeine by Flow Injection Using Multiple-Pulse Amperometry

The present study reports the development and application of a flow injection analysis (FIA) system for the simultaneous determination of uric acid (UA) and caffeine (CAF) using cathodically pretreated boron-doped diamond electrode (CPT-BDD) and multiple-pulse amperometry (MPA). The electrochemical profiles of UA and CAF were analyzed via cyclic voltammetry in the potential range of 0.20-1.7 V using 0.10 mol L^-1 H₂SO₄ solution as supporting electrolyte. Under optimized conditions, two oxidation peaks at potentials of 0.80 V (UA) and 1.4 V (CAF) were observed; the application of these potentials using multiple-pulse amperometry yielded concentration linear ranges of 5.0 × 10^-8-2.2 × 10^-5 mol L^-1 (UA) and 5.0 × 10^-8-1.9 × 10^-5 mol L^-1 (CAF) and limits of detection of 1.1 × 10^-8 and 1.3 × 10^-8 mol L^-1 for UA and CAF, respectively. The proposed method exhibited good repeatability and stability, and no interference was detected in the electrochemical signals of UA and CAF in the presence of glucose, NaCl, KH₂PO₄, CaCl₂, urea, Pb, Ni, and Cd. The application of the FIA-MPA method for the analysis of environmental samples resulted in recovery rates ranging between 98 and 104%. The results obtained showed that the BDD sensor exhibited a good analytical performance when applied for CAF and UA determination, especially when compared to other sensors reported in the literature.

Testing of Diamond Electrodes as Biosensor for Antibody-Based Detection of Immunoglobulin Protein with Electrochemical Impedance Spectroscopy

To control the increasing virus pandemics, virus detection methods are essential. Today’s standard virus detections methods are fast (immune assays) or precise (PCR). A method that is both fast and precise would enable more efficient mitigation measures and better life comfort. According to recent papers, electrochemical impedance spectroscopy (EIS) has proven to detect viruses fast and precise. Boron-doped diamond (BDD) was used as a high-performance electrode material in these works. The aim of this work was to perform an initial test of BDD-based EIS for biosensing. As an easily available standard biomaterial, human immunoglobulin G (IgG) was used as analyte. Niobium plates were coated via hot-filament activated chemical vapor deposition with polycrystalline diamond, and doped with boron for electrical conductivity. An anti-human IgG antibody was immobilised on the BDD electrodes as a biosensing component. Four different analyte concentrations up to 1.1 µg per litre were tested. During EIS measurements, both impedance over frequency curves and Nyquist plot demonstrated no clear sign of a change of the charge transfer resistance. Thus, no positive statement about a successful biosensing could be made so far. It is assumed that these issues need to be investigated and improved, including the relation of BDD electrode size to electrolyte volume, termination of the BDD electrodes (H, O) for a successful functionalisation and EIS frequency range. The work will be continued concerning these improvement issues in order to finally use virus materials as analyte.

Diamond-Based Electrodes for Detection of Metal Ions and Anions

Diamond electrodes have long been a well-known candidate in electrochemical analyte detection. Nano- and micro-level modifications on the diamond electrodes can lead to diverse analytical applications. Doping of crystalline diamond allows the fabrication of suitable electrodes towards specific analyte monitoring. In particular, boron-doped diamond (BDD) electrodes have been reported for metal ions, anions, biomolecules, drugs, beverage hazards, pesticides, organic molecules, dyes, growth stimulant, etc., with exceptional performance in discriminations. Therefore, numerous reviews on the diamond electrode-based sensory utilities towards the specified analyte quantifications were published by many researchers. However, reviews on the nanodiamond-based electrodes for metal ions and anions are still not readily available nowadays. To advance the development of diamond electrodes towards the detection of diverse metal ions and anions, it is essential to provide clear and focused information on the diamond electrode synthesis, structure, and electrical properties. This review provides indispensable information on the diamond-based electrodes towards the determination of metal ions and anions.

Electrochemical N-Acetyl-β-D-glucosaminidase Urinalysis: Toward Sensor Chip-Based Diagnostics of Kidney Malfunction

N-Acetyl-β-D-glucosaminidase (GlcNAcase) is a valuable biomarker for kidney health, as an increased urinary level of the enzyme indicates cell damage within the renal tubular filtration system from acute or chronic organ injury or exposure to nephrotoxic compounds. Effective renal function is vital for physiological homeostasis, and early detection of acute or chronic renal malfunction is critically important for timely treatment decisions. Here, we introduce a novel option for electrochemical urinalysis of GlcNAcase, based on anodic differential pulse voltammetry at boron-doped diamond disk sensors of the oxidizable product 4-nitrophenol (4NP), which is released by the action of GlcNAcase on the synthetic substrate 4NP-N-acetyl-β-D-glucosaminide (GlcNAc-4NP), added to the test solution as a reporter molecule. The proposed voltammetric enzyme activity screen accurately distinguishes urine samples of normal, slightly elevated and critically high urinary GlcNAcase content without interference from other urinary constituents. Moreover, this practice has the potential to be adapted for use in a hand-held device for application in clinical laboratories by physicians or in personal home health care. Evidence is also presented for the effective management of the procedure with mass-producible screen-printed sensor chip platforms.

Voltammetry of 7-dehydrocholesterol as a new and useful tool for Smith-Lemli-Opitz syndrome diagnosis

7-Dehydrocholesterol is an essential biomarker of Smith-Lemli-Opitz syndrome, a congenital autosomal recessive disorder. This study shows for the first time that electrochemical oxidation of 7-dehydrocholesterol can be used for its voltammetric determination. Two classes of supporting electrolytes in acetonitrile and a mixture of acetonitrile-water were used: inorganic acids known to promote structural changes of steroids and indifferent electrolytes. Oxidation of 7-dehydrocholesterol at ca +0.8 V (vs. Ag/AgNO₃ in acetonitrile) in 0.1 mol L^-1 NaClO₄ in acetonitrile is useful for its voltammetric detection using common bare electrode materials. Detection limits for 7-dehydrocholesterol lie in the low micromolar range for all the working electrodes, including boron-doped diamond (0.4 μmol L^-1) and disposable thin-film platinum electrodes (0.5 μmol L^-1), which are advantageous because of the low volumes of studied solutions. After Bligh-Dyer extraction, quantification of 7-dehydrocholesterol concentration (boron-doped diamond) or concentration range (thin-film platinum) is easily attainable in artificial serum. The mere knowledge of the concentration range provides clinically valuable information, as 7-dehydrocholesterol levels are employed for SLOS diagnosis as a binary criterion (elevated, tens to hundreds μmol L^-1 in symptomatic/non-elevated, typically bellow 1 μmol L^-1 in healthy individuals in plasma). Moreover, it is shown that 7-dehydrocholesterol (provitamin D₃) and cholecalciferol (vitamin D₃) can be oxidized in 0.1 mol L^-1 HClO₄ in acetonitrile. Under these conditions, their voltammetric response changes dramatically, and their oxidation potential difference transiently increases from 0.08 V to 0.25 V, which should facilitate their simultaneous voltammetric determination. This work constitutes a foundation for a reliable and straightforward method for Smith-Lemli-Opitz syndrome diagnosis and monitoring 7-dehydrocholesterol's biotransformation to cholecalciferol.

Double-side effect of B/C ratio on BDD electrode detection for heavy metal ion in water

BDD (Boron-doped Diamond) electrode may hold a promising application to detect heavy metal ions for actual water monitoring and early warning, but a poor understanding of influence mechanism of B/C ratio on detection performance is in the way of its fabrication and application. This work is intended to reveal the double-side effect of B/C ratio on detection performance of BDD electrode so as to facilitate its actual application. SBDD (Self-supported Boron-doped Diamond) electrode is introduced for the first time to get rid of the interference factors such as substrate. A systematic investigation is conducted for the influence of B/C ratio on microstructure and electrochemical behavior of SBDD electrodes. With the increase of B/C ratio, the grain size continuously increases, and the preferred orientation gradually changes from plane (220) to (111). The gradual increasing of impurity phase content indicates a deterioration of diamond phase quality. In addition, the electrode electrochemical behavior initially gets better then worse. SBDD electrode with a B/C ratio of 1/500 has the largest active surface area of 2.1 cm², the smallest diffusion resistance and the highest signal response. Under optimal parameter set, the SBDD electrode enjoys a sensitivity of 0.42 μA L μg^-1 cm^-2 and a detection limit of 1.12 μg L^-1 in a wide linear range of 5-120 ppb. The phase quality and grain morphology jointly contribute to the double-side effect. A suitable B-sp³-C content, preferred orientation of (111) and small particle size may make the performance improvement of BDD electrode available.

First electrochemical evaluation of favipiravir used as an antiviral option in the treatment of COVID-19: A study of its enhanced voltammetric determination in cationic surfactant media using a boron-doped diamond electrode

Favipiravir, a promising antiviral agent, is undergoing clinical trials for the potential treatment of the novel coronavirus disease 2019 (COVID-19). This is the first report for the electrochemical activity of favipiravir and its electroanalytical sensing. For this purpose, the effect of cationic surfactant, CTAB was demonstrated on the enhanced accumulation of favipiravir at the surface of cathodically pretreated boron-doped diamond (CPT-BDD) electrode. At first, the electrochemical properties of favipiravir were investigated in the surfactant-free solutions by the means of cyclic voltammetry. The compound presented a single oxidation step which is irreversible and adsorption controlled. A systematic study of various operational conditions, such as electrode pretreatment, pH of the supporting electrolyte, concentration of CTAB, accumulation variables, and instrumental parameters on the adsorptive stripping response, was examined using square-wave voltammetry. An oxidation signal at around +1.21 V in Britton-Robinson buffer at pH 8.0 containing 6 × 10^-4 M CTAB allowed to the adsorptive stripping voltammetric determination of favipiravir (after 60 s accumulation step at open-circuit condition). The process could be used in the concentration range with two linear segments of 0.01-0.1 μg mL^-1 (6.4 × 10^-8-6.4 × 10^-7 M) and 0.1-20.0 μg mL^-1 (6.4 × 10^-7-1.3 × 10^-4 M). The limit of detection values were found to be 0.0028 μg mL^-1 (1.8 × 10^-8 M), and 0.023 μg mL^-1 (1.5 × 10^-7 M) for the first and second segments of calibration graph, respectively. The feasibility of developed methodology was tested to the analysis of the commercial tablet formulations and model human urine samples.

Multi sensor compatible 3D-printed electrochemical cell for voltammetric drug screening

3D printing is a hot topic in electroanalytical chemistry, allowing the construction of custom cells and sensors at affordable prices. In this work, we describe a novel small and practical 3D-printed electrochemical cell. The cell's body, manufactured in ABS on a 3D printer, is composed by three parts easily screwed: solution vessel, stick and cover with two embedded 3D-pen-printed carbon black-polylactic acid (CB-PLA) electrodes (counter and pseudo-reference). The cell is compatible with any planar working electrode, in which boron-doped diamond, graphite sheet (GS) and 3D-printed CB-PLA were shown as examples. A new alternative protocol to quickly produce 3D-printed sensors using a 3D pen and other low-cost apparatus is also proposed. The voltammetric performance of each evaluated sensor was carried out in the presence of redox probe ferricyanide and paracetamol as model analyte, and the surfaces were characterized by electrochemical impedance spectroscopy and scanning electrochemical microscopy. To present an analytical application of the 3D-printed cell, low-cost flexible sensors (GS and CB-PLA) were used as integrated platforms for sampling and detection of solid drugs. As a proof-of-concept, traces of drugs with a historic of counterfeit or adulteration (sildenafil citrate, tadalafil, losartan and 17α-ethinylestradiol) were abrasively sampled over the sensor and assembled on 3D-printed cell to perform a fast voltammetric scan in the presence of only 500 μL of electrolyte. This protocol is attractive for pharmaceutical and forensic sciences as a simple preliminary screening method which could identify the presence or absence of the suspicious drug as well as impurities or adulterants. The 3D-printed cell was also used for the determination of 17α-ethinylestradiol in a contraceptive pill to demonstrate a quantitative analysis. The cell is quickly printed (90 min), cheap (US$ 0.30) and requires low electrolyte volumes (0.5-3.0 mL), being suitable to be used in several other electroanalyses, especially for on-site applications.

Boron-Doped Diamond Electrodes: Recent Developments and Advances in View of Electrochemical Drug Sensors

Conductive boron-doped diamond (BDD), in addition to its superior material properties, offers many important advantages that make it an interesting material for electroanalytical studies. It has been considered as an excellent electrode material for electrooxidation of drug active compounds in their dosage forms or in biological materials due to its good physical and chemical properties. It contains not only the largest solvent working potential window compared to other electrode materials, but also it has low background and capacitive currents; lower problems with passivation and it has the ability to withstand extreme potentials, corrosive, and high temperature/pressure environments. The aim of this review is not only to provide a state-of-the-art of diamond electrochemistry but also to serve as a reference point for any researcher wishing to commence work with diamond electrodes and understand electrochemical data. Therefore, it is focused on the carbon-based materials, electrochemical properties of the BDD film electrode, its fundamental research, and its electrochemical pretreatment process are discussed in detail. In this case, there are important studies to show the effective BDD drug sensors for the detection and determination of drugs and the present review critically summarizes the available data in this field between 2015 and 2020.

How to Improve the Performance of Electrochemical Sensors via Minimization of Electrode Passivation

It follows from critical evaluation of possibilities and limitations of modern voltammetric/amperometric methods that one of the biggest obstacles in their practical applications in real sample analysis is connected with electrode passivation/fouling by electrode reaction products and/or matrix components. This review summarizes possibilities how to minimise these problems in the field of detection of small organic molecules and critically compares their potential and acceptability in practical laboratories. Attention is focused on simple and fast electrode surface renewal, the use of disposable electrodes just for one and/or few measurements, surface modification minimising electrode fouling, measuring in flowing systems, application of rotating disc electrode, the use of novel separation methods preventing access of passivating particles to electrode surface and the novel electrode materials more resistant toward passivation. An attempt is made to predict further development in this field and to stress the need for more systematic and less random research resulting in new measuring protocols less amenable to complications connected with electrode passivation.

Cloud-point extraction associated with voltammetry: preconcentration and elimination of the sample matrix for trace determination of methyl parathion in honey

This work presents the association of cloud point extraction (CPE) and electroanalysis for the selective and sensitive determination of methyl parathion (MP) in honey. The CPE step provided the pre-concentration of MP from a complex sample, in which the optimized extraction parameters (Triton X-100 concentration of 0.75% w/v, NaCl concentration of 1.0% w/v and heating time of 30 min) were investigated using a factorial design (23). The detection of MP was performed using a cathodically pre-treated boron-doped diamond (BDD) working electrode and square wave voltammetry (SWV), after a suitable dilution of the CPE extract in Britton-Robinson buffer pH 6.0 as the supporting electrolyte. MP presented three electrochemical processes over the BDD surface, but only the reduction peak at around -0.7 V was monitored for the MP determination (higher detectability). Improved reproducibility was reached by applying an in situ cleaning step (+2.0 V for 15 s) followed by a re-activation process (-2.0 V for 15 s) between measurements. Using the optimized variables, a linear range between 0.1 and 2.0 μmol L-1 was obtained for MP with a limit of detection of 0.006 μmol L-1, a 6-fold lower value when compared with the value attained without the CPE step. The experimental enrichment factor of MP was 6.1. Also, the optimized CPE allowed the determination of MP in honey samples with good accuracy (recovery between 94 and 106%), which was not possible using direct detection (without CPE) due to the matrix interference. This is the first paper that demonstrates the combination of CPE and electroanalysis for the determination of an organic compound.

Cathodically Pretreated AuNPs-BDD Electrode for Detection of Hexavalent Chromium

Hexavalent chromium (Cr (VI)) has strong oxidizing properties and can result in strong carcinogenic effects on human bodies. Therefore, it is necessary to detect hexavalent chromium sensitively and accurately. This article proposes the gold nanoparticles (AuNPs)–boron-doped diamond (BDD) electrode for the direct determination of chromium with a green and simple detection process by cathodic stripping voltammetry. Gold nanoparticles are used to enhance the detection performance toward Cr (VI). The effect of different pretreatment methods on electrode modification has been studied, and the detection parameters have been optimized. With the optimized conditions, the AuNPs–BDD electrode presents a good linear behavior in a Cr (VI) concentration range of 10 to 1000 μg/L. A low limit of detection of 1.19 μg/L is achieved. The detection process is simple and environmentally friendly. The sensor has been tested for the detection of Cr (VI) in a real water sample with satisfactory results, which indicates potential application of the AuNPs–BDD electrode for the sensitive and onsite detection of Cr (VI).

A Review on Recent Advances in the Applications of Boron-Doped Diamond Electrochemical Sensors in Food Analysis

The usage of boron-doped diamond (BDD) material has found to be very attractive in modern electroanalytical methods and received massive consideration as perspective electrochemical sensor due to its outstanding (electro)chemical properties. These generally known facilities include large potential window, low background currents, ability to withstand extreme potentials and strong tendency to resist fouling compared to conventional carbon-based electrodes. As evidence of superiority of this material, couple of reviews describing the overview of various applications of BDD electrodes in the field of analytical and material chemistry has been reported in scientific literature during last decade. However, herein proposed review predominantly focuses on the most recent developments (from 2009 to 2020) dealing with the application of BDD as an advanced and environmental-friendly sensor platform in food analysis. The main method characteristics of analysis of various organic food components with different chemical properties, including additives, flavor and aroma components, phenolic compounds, flavonoids and pesticides in food matrices are described in more details. The importance of BDD surface termination, presence of sp² content and boron doping level on electrochemical sensing is discussed. Apart from this, a special attention is paid to the evaluation of main analytical characteristics of the BDD electrochemical sensor in single- and multi-analyte detection mode in food analysis. The recent achievements in the utilizing of BDD electrodes in amperometric detection coupled to flow injection analysis, batch injection analysis, and high-performance liquid chromatography are also commented. Moreover, actual trends in sample preparation techniques prior to electrochemical sensing in food analysis are referred.

Electrooxidation of tetracycline antibiotic demeclocycline at unmodified boron-doped diamond electrode and its enhancement determination in surfactant-containing media

In this paper, for the first time, the study of voltammetric determination of tetracycline antibiotic demeclocycline was conducted. The oxidation of compound was investigated using a commercially available boron-doped diamond electrode pretreated electrochemically (anodic and subsequent cathodic). Addition of anionic surfactant, sodium dodecylsulfate (SDS) and cationic surfactant, cetyltrimethylammonium bromide (CTAB) to the demeclocycline-containing electrolyte solution at pH 2.0 and 9.0, respectively, was found to improve the sensitivity of the stripping voltammetric measurements. Employing square-wave stripping mode (after 30 s accumulation at open-circuit condition) in Britton-Robinson buffer, the limits of detection were found to be 1.17 μg mL^-1 (2.3 × 10^-6 M) for 4 × 10^-4 SDS-containing buffer solution at pH 2, and 0.24 μg mL^-1 (4.8 × 10^-7 M) for 1 × 10^-4 CTAB-containing buffer solution at pH 9.0. The feasibility of the developed approach for the quantification of demeclocycline was tested in urine samples.