Ti/Pt−Pd‐Based Nanocomposite: Effects of Metal Oxides on the Oxygen Reduction Reaction

Exploring the Potential of Heteroatom-Doped Graphene Nanoribbons as a Catalyst for Oxygen Reduction

In this study, we created a series of N, S, and P-doped and co-doped carbon catalysts using a single graphene nanoribbon (GNR) matrix and thoroughly evaluated the impact of doping on ORR activity and selectivity in acidic, neutral, and alkaline conditions. The results obtained showed no significant changes in the GNR structure after the doping process, though changes were observed in the surface chemistry in view of the heteroatom insertion and oxygen depletion. Of all the dopants investigated, nitrogen (mainly in the form of pyrrolic-N and graphitic-N) was the most easily inserted and detected in the carbon matrix. The electrochemical analyses conducted showed that doping impacted the performance of the catalyst in ORR through changes in the chemical composition of the catalyst, as well as in the double-layer capacitance and electrochemically accessible surface area. In terms of selectivity, GNR doped with phosphorus and sulfur favored the 2e- ORR pathway, while nitrogen favored the 4e- ORR pathway. These findings can provide useful insights into the design of more efficient and versatile catalytic materials for ORR in different electrolyte solutions, based on functionalized carbon.

N-Doped and Sulfonated Reduced Graphene Oxide Supported PtNi Nanoparticles as Highly Efficient Electrocatalysts for Oxygen Reduction Reaction

N-doping and sulfonation is prepared on the reduced graphene oxide (rGO) support for PtNi nanoparticles (PtNi/S-(N)rGO) by a simple method of hydrothermal synthesis and thermal decomposition. The specific surface area increases from 180.7 m2/g of PtNi/rGo to 293.5 m2/g of PtNi/S-(N)rGO. The surface morphology shows wrinkles sites, which are separated by the sulfonated groups. The catalytic stability and efficiency are improved by the anchoring effect of sulfonated groups and evenly distribution of nanoparticles, respectively. The synergistic effect of N-doping and sulfonation can be in favor of catalytic efficiency by the increase of number of electron transfer. The half-wave potential of the PtNi/S-(N)rGO catalyst is up to 0.632 V, a small positive shift compared to the Pt/C catalyst. The durability of the PtNi/S-(N)rGO is 2.6 times higher than of the Pt/C catalyst after 5000 repeated cycles. The peak power of the PtNi/S-(N)rGO catalyst increased 37.5% compared to the Pt/C catalyst. Therefore, the stability and catalytic efficiency are improved by the PtNi/S-(N)rGO catalyst applied in proton exchange membrane fuel cell (PEMFC) compared to the commercial Pt/C catalyst.

Using Palladium and Gold Palladium Nanoparticles Decorated with Molybdenum Oxide for Versatile Hydrogen Peroxide Electroproduction on Graphene Nanoribbons

Electrocatalytic production of H₂O₂ via a two-electron oxygen reduction reaction (ORR-2e^-) is regarded as a highly promising decentralized and environmentally friendly mechanism for the production of this important chemical commodity. However, the underlying challenges related to the development of catalytic materials that contain zero or low content of noble metals and that are relatively more active, selective, and resistant for long-term use have become a huge obstacle for the electroproduction of H₂O₂ on commercial and industrial scales. The present study reports the synthesis and characterization of low metal-loaded (≤6.4 wt %) catalysts and their efficiency in H₂O₂ electroproduction. The catalysts were constructed using gold palladium molybdenum oxide (AuPdMoO_x) and palladium molybdenum oxide (PdMoO_x) nanoparticles supported on graphene nanoribbons. Based on the application of a rotating ring-disk electrode, we conducted a thorough comparative analysis of the electrocatalytic performance of the catalysts in the ORR under acidic and alkaline media. The proposed catalysts exhibited high catalytic activity (ca. 0.08 mA g_noble metal^-1 in an acidic medium and ca. 6.6 mA g_noble metal^-1 in an alkaline medium), good selectivity (over 80%), and improved long-term stability toward ORR-2e^-. The results obtained showed that the enhanced ORR activity presented by the catalysts, which occurred preferentially via the two-electron pathway, was promoted by a combination of factors including geometry, Pd content, interparticle distance, and site-blocking effects, while the electrochemical stability of the catalysts may have been enhanced by the presence of MoO_x.

Proton Exchange Membrane Fuel Cells (PEMFCs): Advances and Challenges

The study of the electrochemical catalyst conversion of renewable electricity and carbon oxides into chemical fuels attracts a great deal of attention by different researchers. The main role of this process is in mitigating the worldwide energy crisis through a closed technological carbon cycle, where chemical fuels, such as hydrogen, are stored and reconverted to electricity via electrochemical reaction processes in fuel cells. The scientific community focuses its efforts on the development of high-performance polymeric membranes together with nanomaterials with high catalytic activity and stability in order to reduce the platinum group metal applied as a cathode to build stacks of proton exchange membrane fuel cells (PEMFCs) to work at low and moderate temperatures. The design of new conductive membranes and nanoparticles (NPs) whose morphology directly affects their catalytic properties is of utmost importance. Nanoparticle morphologies, like cubes, octahedrons, icosahedrons, bipyramids, plates, and polyhedrons, among others, are widely studied for catalysis applications. The recent progress around the high catalytic activity has focused on the stabilizing agents and their potential impact on nanomaterial synthesis to induce changes in the morphology of NPs.