Theoretical calculations and experimental verification of carbon dioxide reduction electrocatalyzed by metalloporphyrin

Metal-functionalized porphyrin-like graphene structures are promising electrocatalysts for carbon dioxide reduction reaction (CO2RR) as their metal centers can modulate activity. Yet, the role of metal center of metalloporphyrins (MTPPs) in CO2 reaction activity is still lacking deep understanding. Here, CO2RR mechanism on MTPPs with five different metal centers (M = Fe, Co, Cu, Zn and Ni) are examined by first-principles calculations. The *COOH formation is the rate determined step on the five MTPP structures, and the CoTPP exhibits the best CO2RR activity while ZnTPP and NiTPP are the worst, which is also verified by our experiment. The CO2RR activity is controlled by adsorption states of intermediates (*CO, *COOH), i.e., chemisorption (e.g., on CoTPP) and physisorption (on ZnTPP and NiTPP) of intermediates will lead to good and poor activity, respectively. The deeper the d-band center of the porphyrin ring complexed metal atom, the weaker bonding of MTPP with CO and COOH. Theoretical calculations and experimental results indicate that MTPPs with Co and Fe centers lead to a reduction in the energy barriers for the two uphill reaction steps in the electrocatalytic CO2 reduction process, thereby enhancing CO2 reduction electrocatalytic activity. Faradaic efficiency of CO is correlated with the reaction energy barrier of the first proton-coupled electron reduction process, displaying a strong linear correlation. This work provides a fundamental understanding of MTPPs used as electrocatalysts for CO2RR.

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Multiscale CO2 Electrocatalysis to C2+ Products: Reaction Mechanisms, Catalyst Design, and Device Fabrication

Electrosynthesis of value-added chemicals, directly from CO2, could foster achievement of carbon neutral through an alternative electrical approach to the energy-intensive thermochemical industry for carbon utilization. Progress in this area, based on electrogeneration of multicarbon products through CO2 electroreduction, however, lags far behind that for C1 products. Reaction routes are complicated and kinetics are slow with scale up to the high levels required for commercialization, posing significant problems. In this review, we identify and summarize state-of-art progress in multicarbon synthesis with a multiscale perspective and discuss current hurdles to be resolved for multicarbon generation from CO2 reduction including atomistic mechanisms, nanoscale electrocatalysts, microscale electrodes, and macroscale electrolyzers with guidelines for future research. The review ends with a cross-scale perspective that links discrepancies between different approaches with extensions to performance and stability issues that arise from extensions to an industrial environment.

A Bifunctional Ionic Liquid for Capture and Electrochemical Conversion of CO2 to CO over Silver

Electrochemical conversion of CO2 requires selective catalysts and high solubility of CO2 in the electrolyte to reduce the energy requirement and increase the current efficiency. In this study, the CO2 reduction reaction (CO2RR) over Ag electrodes in acetonitrile-based electrolytes containing 0.1 M [EMIM][2-CNpyr] (1-ethyl-3-methylimidazolium 2-cyanopyrolide), a reactive ionic liquid (IL), is shown to selectively (>94%) convert CO2 to CO with a stable current density (6 mA·cm-2) for at least 12 h. The linear sweep voltammetry experiments show the onset potential of CO2 reduction in acetonitrile shifts positively by 240 mV when [EMIM][2-CNpyr] is added. This is attributed to the pre-activation of CO2 through the carboxylate formation via the carbene intermediate of the [EMIM]+ cation and the carbamate formation via binding to the nucleophilic [2-CNpyr]- anion. The analysis of the electrode-electrolyte interface by surface-enhanced Raman spectroscopy (SERS) confirms the catalytic role of the functionalized IL where the accumulation of the IL-CO2 adduct between -1.7 and -2.3 V vs Ag/Ag+ and the simultaneous CO formation are captured. This study reveals the electrode surface species and the role of the functionalized ions in lowering the energy requirement of CO2RR for the design of multifunctional electrolytes for the integrated capture and conversion.

Application of Ionic Liquids in Electrochemistry-Recent Advances

In this review, the roles of room temperature ionic liquids (RTILs) and RTIL based solvent systems as proposed alternatives for conventional organic electrolyte solutions are described. Ionic liquids are introduced as well as the relevant properties for their use in electrochemistry (reduction of ohmic losses), such as diffusive molecular motion and ionic conductivity. We have restricted ourselves to provide a survey on the latest, most representative developments and progress made in the use of ionic liquids as electrolytes, in particular achieved by the cyclic voltammetry technique. Thus, the present review comprises literature from 2015 onward covering the different aspects of RTILs, from the knowledge of these media to the use of their properties for electrochemical processes. Out of the scope of this review are heat transfer applications, medical or biological applications, and multiphasic reactions.

Potential-Induced Adsorption and Structuring of Water at the Pt(111) Electrode Surface in Contact with an Ionic Liquid

Water adsorption is important in many fields from surface electrochemistry to electrocatalysis, where molecular-level information is much needed in order to gain a detailed understanding of the role of interfacial water. Here we report on water at Pt(111) surfaces in contact with an [EIMIM][BF₄] ionic liquid, which was spectroscopically resolved by using in situ sum-frequency generation (SFG). O-H modes are used to study water adsorption and water structure as a function of electrode potential, while the analysis of C-H modes is used to infer orientational changes of [EMIM] cations at the interface. Different from the bulk where free water molecules are found, SFG spectra provide evidence that an interfacial layer with an extended network of hydrogen-bonded water molecules exists and grows with increasing absolute potential which is used to identify the potential of zero charge at +0.1 V SHE, where a pronounced minimum in O-H intensity is found.