A Solid‐State Electrochemiluminescence Sensor Based on Novel Two‐Dimensional Ti 3 C 2 MXene

Promoting effect of TiVC MXene on cathodic electrogenerated chemiluminescence of Ru(bpy)32+ and its application in the sensitive detection of sulfite

The enhanced cathodic ECL of Ru(bpy)32+ at a bimetallic element MXenes (TiVC MXene) modified electrode in neutral aqueous condition is reported. TiVC MXene significantly catalyzed the oxygen reduction reaction (ORR) as well as the electrochemical reduction of Ru(bpy)32+ to produce reactive oxygen species and Ru(bpy)3+. The obtained hydroxyl radical (OH∙) not only oxidized Ru(bpy)3+ to generate Ru(bpy)32+* and emit light through coreactant pathway, but also oxidized Ru(bpy)32+ to Ru(bpy)33+, which caused an annihilation ECL reaction. As a result, two pathways occurred simultaneously to generate strong cathodic ECL signal. Sulfite removes the dissolved oxygen in water and reduces the occurrence of ORR, which prohibits the generation of OH∙ to decrease the ECL signal. The decrement of ECL intensity varied linearly with the concentration of sulfite in the range 2 nM to 50 μM with a detection limit of 0.14 nM (3σ). The proposed sensor exhibited good analytical performance, and could be used in the detection of sulfite in real samples. The results revealed that the electrocatalytic behavior of TiVC MXene is the key factor for strong cathodic Ru(bpy)32+ ECL, which provides new application in ECL sensing field.

New two-dimensional nanocomposites combined with target-induced strategy in an electrochemical aptasensor for sensitive determination of sulfadimethoxine

Ni-Zn bimetallic organic framework nanosheets (NiZn-MOF NSs) were modified onto PEI-functionalized MXene for the first time. The combination of the two kinds of nanosheets forms a sensing platform with superior conductivity and biocompatibility. On this basis, a highly sensitive biosensor was developed for the determination of sulfadimethoxine (SDM). Furthermore, Au and Mn nanoparticles decorated reduced graphene oxide (Au-Mn/rGO) was introduced as a signal hindering molecule under the target-induced amplification strategy. When the Au-Mn/rGO-labelled SDM-binding aptamer (Au-Mn/rGO-SBA) specifically bound to target SDM, it detached from the electrode, thereby further amplifying the electrochemical signal of [Fe(CN)6]3-/4-. The developed aptasensor for SDM showed excellent response signals in the range 1 pg mL-1 to 100 ng mL-1, with a limit of detection (LOD) as low as 0.22 pg mL-1. Significantly, the proposed sensor also showed satisfactory results in milk samples with recoveries ranging from 87.0 to 96.4% and RSD from 1.5 to 5.1%, which is believed to be useful in food safety assays.

Advanced growth of 2D MXene for electrochemical sensors

Over the last few years, electroanalysis has made significant advancements, particularly in developing electrochemical sensors. Electrochemical sensors generally include emerging Photoelectrochemical and Electrochemiluminescence sensors, which combine optical techniques and traditional electrochemical bio/non-biosensors. Numerous EC-detecting methods have also been designed for commercial applications to detect biological and non-biological markers for various diseases. Analytical applications have recently focused significantly on one of the novel nanomaterials, the MXene. This material is being extensively investigated for applications in electrochemical sensors due to its unique mechanical, electronic, optical, active functional groups and thermal characteristics. This study extensively discusses the salient features of MXene-based electrochemical sensors, photoelectrochemical sensors, enzyme-based biosensors, immunosensors, aptasensors, electrochemiluminescence sensors, and electrochemical non-biosensors. In addition, their performance in detecting various substances and contaminants is thoroughly discussed. Furthermore, the challenges and prospects the MXene-based electrochemical sensors are elaborated.

A Novel Signal-On Electrochemiluminescence Immunosensor for the Detection of NSCLC Antigen Biomarker Based on New Co-Reaction Accelerators

Non-small cell lung cancer (NSCLC) is the most common type of lung cancer with substantial morbidity and mortality. Herein, a new signal-on electrochemiluminescence (ECL) immunosensor based on multiple amplification strategies is constructed for ultrasensitive detection of cytokeratin 19 fragment antigen 21-1 (CYFRA21-1) biomarker related to NSCLC. Polyethyleneimine (PEI) functionalized MXene is decorated with NiMn layer double hydroxide (NiMn LDH) to form MXene-PEI-NiMn LDH composite. Specially, the La-MOF@ZIF-67 bimetallic organic framework (named as LZBM) and MXene-PEI-NiMn LDH both served as coreaction accelerators to improve the ECL emission of the luminol-H₂ O₂ system. To be specific, Au nanoparticles (AuNPs) coated MXene-PEI-NiMn LDH is applied to immobilize primary CYFRA21-1 antibody (Ab₁ ), while AuNPs decorated LZBM was used for the loading of luminol and secondary CYFRA21-1 antibody (Ab₂ ) to form tracer label. Therefore, the ECL signal of the sandwich-type immunosensor is significantly enhanced due to the high loading capability for luminol and the synergistic catalytic ability for the decomposition of H₂ O₂ into reactive oxygen species (ROS). Under the optimal experimental conditions, the ECL immunosensor exhibited good analytical performances for CYFRA21-1 detection with a wide linear range (100 fg mL^-1 -100 ng mL^-1 ) and a low limit of detection (85.20 fg mL^-1 ), providing a promising method for early diagnosis of NSCLC.

2D metal carbides and nitrides (MXenes) for sensors and biosensors

MXenes are layered two-dimensional (2D) materials discovered in 2011 (Ti₃C₂X) and are otherwise called 2D transition metal carbides, carbonitrides, and nitrides. These 2D layered materials have been in the limelight for a decade due to their interesting properties such as large surface area, high ion transport, biocompatibility, and low diffusion barrier. Therefore, MXenes are widely preferred by researchers for applications in electronics, sensing, biosensing, electrocatalysis, super-capacitors and fuel cells. There are a number of methods available for the bulk synthesis of MXene-based nanomaterials. In addition, the possibility of structural modification as required and its outstanding surface chemistry offer a fascinating interface for the development of novel biosensors. In this review, we specifically discuss important MXene synthesis routes. Moreover, critical parameters such as surface functionalization that can dictate the mechanical, electronic, magnetic, and optical properties of MXenes are also discussed. Following this, methods available for the surface functionalization and modification strategies of MXenes are also discussed. Furthermore, the emergence of gas, electrochemical, and optical biosensors based on MXenes since its first report is discussed in detail. Finally, future directions of MXenes biosensors for critical applications are discussed.