Template-Directed Synthesis of Multiply Mechanically Interlocked Molecules Under Thermodynamic Control

Characterization by Gel Permeation Chromatography of the Molecular Weight of Supramolecular Polymers Generated by Forming Polyrotaxanes through the Introduction of External Stoppers

Supramolecular polymers find wide applications across diverse domains, and the molecular weight exerts a critical influence on their applicability. Consequently, the measurement of molecular weight for supramolecular polymers assumes paramount significance. Gel Permeation Chromatography (GPC) requiring low-concentration condition is a common characterization employed for molecular weight determination, which is not suitable for supramolecular polymers possessing concentration-independence property. Here, to break this threshold, we synthesized M1 embodying dibenzo-24-crown-8 (DB24C8) moiety as well as dibenzylammonium salt (DBA) group, which was capable of self-assembling into supramolecular polymers terminated with aldehyde groups at its end. Upon the addition of (4- (1,2,2-Triphenylvinyl) phenyl) methylamine (TPE-NH2), supramolecular polymers underwent a transition into polyrotaxanes, for which it was led by the generation of imine bonds. By virtue of GPC, the molecular weight of polyrotaxanes was obtained, then it was available to gain the molecular weight of supramolecular polymers with the help of transformation efficiency.

Adjusting the Architecture of Heptagonal Metallo-Macrocycles by Embedding Metal Nodes into the Backbone

Coordination-driven self-assembly has been extensively employed for the bottom-up construction of discrete metallo-macrocycles. However, the prevalent use of benzene rings as the backbone limits the formation of large metallo-macrocycles with more than six edges. Herein, by embedding metal nodes into the ligand backbone, we successfully regulated the ligand arm angle and assembled two giant heptagonal metallo-macrocycles with precise control. The angle between two arms at position 4 of the central terpyridine (tpy) extended after complexation with metal ions, leading to ring expansion of the metallo-macrocycle. The assembled structures were straightforwardly identified through multi-dimensional NMR spectroscopy (1 H, COSY, NOESY), multidimensional mass spectrometry analysis (ESI-MS and TWIM-MS), transmission electron microscopy (TEM), as well as scanning tunneling microscopy (STM). In addition, the catalytic performances of metallo-macrocycles in the oxidation of thioanisole were studied, with both supramolecules exhibiting good conversion rates. Furthermore, fiber-like nanostructures were observed from single-molecule heptagons by hierarchical self-assembly.

Solvent-Responsive Reversible and Controllable Conversion between a Polyimine Membrane and an Organic Molecule Cage

Adaptive bionic self-correcting behavior offers an attractive property for chemical systems. Here, based on the dynamic feature of imine formation, we propose a solvent-responsive strategy for smart switching between an amorphous ionic polyimine membrane and a crystalline organic molecule cage without the addition of other building blocks. To adapt to solvent environmental constraints, the aldehyde and amine components undergo self-correction to form a polymer network or a molecular cage. Studies have shown that the amorphous film can be switched in acetonitrile to generate a discrete cage with bright birefringence under polarized light. Conversely, the membrane from the cage crystal conversion can be regained in ethanol. Such a membrane-cage interconversion can be cycled continuously at least 5 times by switching the two solvents. This work builds a bridge between the polymer network and crystalline molecules and offers prospects for smart dynamic materials.

Incorporation of Cation Affects the Redox Reactivity of Fe-NNN Complexes on C-H Oxidation

Cations such as Lewis acids have been shown to enhance the catalytic activity of high-valent Fe-oxygen intermediates. Herein, we present a pyridine diamine ethylene glycol macrocycle, which can form Zn(II)- or Fe(III)-complex with the NNN site, while allowing redox-inactive cations to bind to the ethylene glycol moiety. The addition of alkali, alkali earth, and lanthanum ions resulted in positive shifts to the Fe(III/II) redox potential. Calculation of dissociation constants showed the tightest binding with a Ba²⁺ ion. Density functional theory calculations were used to elucidate the effects of redox inactive cations toward the electronic structures of Fe complexes. Although the Fe-NNN complexes, both in the absence and presence of cations, can catalyze C-H oxidation of 9,10-dihydroanthracene, to give anthracene [hydrogen atom transfer (HAT) product], anthrone, and anthraquinone [oxygen atom transfer (OAT) products], highest overall activity and OAT/HAT product ratios were obtained in the presence of dications, that is, Ba²⁺ and Mg²⁺, respectively.

Mechanically interlocked molecular handcuffs

The field of mechanically interlocked molecules that employ a handcuff component are reviewed. The variety of rotaxane and catenane structures that use the handcuff motif to interlock different components are discussed and a new nomenclature, distilling diverse terminologies to a single approach, is proposed. By unifying the interpretation of this class of molecules we identify new opportunities for employing this structural unit for new architectures.

Mechanically interlocked molecules that employ a handcuff component provide a pathway to highly unusual structures, a new nomenclature is proposed which helps to identify opportunities for employing this structural unit for new architectures.

New Set of Multicomponent Crystals as Efficient Heterogeneous Catalysts for the Synthesis of Cyclic Carbonates

Three new multicomponent crystals 1a-1c of Zn(II), Mn(II), and Co(II), respectively, were synthesized by the reaction of 2,6-bis(hydroxymethyl)pyridine, the respective metal salts, and sodium benzoate in a 1:1:2 ratio. One component of these multicomponent crystals 1a-1c is the dicationic 2,6-bis(hydroxymethyl)pyridine metal complex and the other component is the dianionic tetrabenzoate complex of the same metal. The complexes were fully characterized by single-crystal X-ray structure determination. The X-ray structure of these compounds 1a-1c reveals the formation of 1D supramolecular chain parallel to the crystallographic b axis via H-bonding interactions between the dicationic and dianionic parts of the respective compound. The Mn(II) (1b) and Co(II) (1c) complexes show antiferromagnetic coupling between the two associated metal centers via the H-bonding interaction pathway. All the three compounds 1a-1c were tested as heterogeneous catalytic systems for the successful conversion of epoxides to cyclic carbonates in solvent-free condition under approximately 10 bar of pressure of CO2 and temperature ranging between 60 and 80 °C along with tetrabutyl ammonium bromide acting as a cocatalyst. All the three compounds 1a-1c were found to have turnover number more than 1000 for the respective epoxides except for the conversion of cyclohexene oxide to cyclohexene carbonate.

Synthesis and characterisation of rylene diimide dimers using molecular handcuffs

Mechanically interlocked handcuffs provide a strategy to study rylene diimide dimers and to investigate their electronic and magnetic properties.

A strategy for positioning, and loosely connecting, molecules in close proximity using mechanically interlocked handcuffs is described. The strategy is demonstrated using rylene diimides, creating dimeric structures in which two components are linked through pillar[5]arene/imidazolium rotaxanes. Investigation of the resulting molecules demonstrates intriguing and new properties that arise from placing these redox active dye molecules together, allowing interactions, whilst allowing the molecules to separate as required. In particular we observe excimer emission from a perylene diimide dimer handcuff and the formation of an unusual radical anion π-dimer upon double reduction of the same molecule. The latter exhibits a unique visible absorption profile for a PDI-based molecule. We demonstrate the flexibility of our approach by making an unprecedented mixed perylene diimide/naphthalene diimide dimer which also reveals interactions between the two components. Our synthetic strategy facilitates the creation of unusual dimeric structures and allows the investigation of intermolecular interactions and the effects they have on electronic and magnetic properties.

Synthesis of rotaxanes and catenanes using an imine clipping reaction

Supramolecular chemistry and self-assembly provide a valuable chance to understand the complicated topological structures on a molecular level. Two types of classical mechanically interlocked molecules, rotaxanes and catenanes, possess non-covalent mechanical bonds and have attracted more attention not only in supramolecular chemistry but also in the fields of materials science, nanotechnology and bioscience. In the past decades, the template-directed clipping reaction based on imine chemistry has become one of the most efficient methods for the construction of functionalized rotaxanes and catenanes. In this review, we outlined the main progress of rotaxanes and catenanes using the template-directed clipping approach of imine chemistry. The review contains the novel topological structures of rotaxanes and catenanes, functions and applications.

Diversity-oriented synthesis and cytotoxic activity evaluation of biaryl-containing macrocycles

Synthesis of biaryl-containing macrocycles has been carried out through a four-step approach comprising two Ugi four component reactions and a Suzuki–Miyaura macrocyclization.

Conformation driven in situ interlock: from discrete metallocycles to infinite polycatenanes

A novel conformation driven self-assembly system, where four metallocycles with different conformations have been in situ self-assembled, has been reported. Interestingly, only square metallocycles can further interlock into polycatenanes. However, rectangular and rhombus metallocycles fail to overcome such an entropically unfavourable process, which constitutes an obstacle to the formation of polycatenanes.

Formation of a hetero[3]rotaxane by a dynamic component-swapping strategy

Acid-catalysed scrambling of the mechanically interlocked components between two different homo[3]rotaxanes, constituted of dumbbells containing two secondary dialkylammonium ion recognition sites encircled by two [24]crown-8 rings, each containing a couple of imine bonds, affords a statistical mixture of a hetero[3]rotaxane along with the two homo[3]rotaxanes, indicating that neither selectivity nor cooperativity is operating during the assembly process.

Mechanistic Studies on Covalent Assemblies of Metal-Mediated Hemi-Aminal Ethers

The use of reversible covalent bonding in a four-component assembly incorporating chiral alcohols was recently reported to give a method for determining the enantiomeric excess of the alcohols via CD spectroscopy.

The use of reversible covalent bonding in a four-component assembly incorporating chiral alcohols was recently reported to give a method for determining the enantiomeric excess of the alcohols via CD spectroscopy. Experiments that probe the mechanism of this assembly, which consists of 2-formylpyridine (2-PA), dipicolylamine (DPA), Zn(ii) and alcohols to yield zinc complexes of tren-like ligands, are presented. The studies focus upon the mechanism of conversion of a hemi-aminal (1) to a hemi-aminal ether (3), thereby incorporating the fourth component. It was found that molecular sieves along with 3 to 4 equivalents of alcohol are required to drive the conversion of 1 to 3. Attempts to isolate an intermediate in this reaction via addition of strong Lewis acids led to the discovery of a five-membered ring pyridinium salt (5), but upon exposure to Zn(ii) and alcohols gave different products to the assembly. This was interpreted to support the intermediacy of an iminium species. Kinetic studies reveal that the conversion of 1 to 3 is zero-order in alcohol in large excesses of alcohol, supporting rate-determining formation of an intermediate prior to reaction with alcohol. Further, the magnitudes of the rate constants for interconversion of 1 and 3 are similar, supporting the notion that there are similar rate-determining steps (rds) for the forward and reverse reactions. Hammett plots show that the rds involves creation of a negative charge (interpreted as the loss of positive charge), supporting the notion that the decomplexation of Zn(ii) from the assemblies to generate apo-forms of 1 and 3 is rate-determining. The individual mechanistic conclusions are combined to create a qualitative reaction coordinate diagram for the interconversion of 1 and 3.

Tetraphenylethene modified [n]rotaxanes: synthesis, characterization and aggregation-induced emission behavior

A series of novel [n]rotaxanes based on a tetraphenylethene (TPE) backbone were constructed by a template-directed clipping approach and their structures were well-characterized.

Aggregation-induced emission behavior of a pH-controlled molecular shuttle based on a tetraphenylethene moiety

A TPE-based molecular shuttle having amide and amine units has been synthesized. The shuttling motion of the macrocycle component can adjust its AIE behaviour.

Dynamic combinatorial/covalent chemistry: a tool to read, generate and modulate the bioactivity of compounds and compound mixtures

Reversible covalent bond formation under thermodynamic control adds reactivity to self-assembled supramolecular systems, and is therefore an ideal tool to assess complexity of chemical and biological systems. Dynamic combinatorial/covalent chemistry (DCC) has been used to read structural information by selectively assembling receptors with the optimum molecular fit around a given template from a mixture of reversibly reacting building blocks. This technique allows access to efficient sensing devices and the generation of new biomolecules, such as small molecule receptor binders for drug discovery, but also larger biomimetic polymers and macromolecules with particular three-dimensional structural architectures. Adding a kinetic factor to a thermodynamically controlled equilibrium results in dynamic resolution and in self-sorting and self-replicating systems, all of which are of major importance in biological systems. Furthermore, the temporary modification of bioactive compounds by reversible combinatorial/covalent derivatisation allows control of their release and facilitates their transport across amphiphilic self-assembled systems such as artificial membranes or cell walls. The goal of this review is to give a conceptual overview of how the impact of DCC on supramolecular assemblies at different levels can allow us to understand, predict and modulate the complexity of biological systems.

Photo-responsive [2]catenanes: synthesis and properties

A series of novel dithienylethene-based macrocycles containing ammonium moieties has been synthesized.

Synthesis, Antimicrobial Activity, and Molecular Docking Study of Some Novel Cyclophanes with Imino Intra-Annular Functionality

The synthesis and structural characterisation of novel imino cyclophanes incorporating various spacer units is described. All the imino cyclophanes exhibit comparable antibacterial activity against Gram positive (Bacillus subtillus, Staphylococcus aureus) and Gram negative (Escherchia coli, Klebsiella pneumonia) bacterial strains. The imino cyclophanes also exhibit good antifungal activity against human pathogenic fungus, Candida albicans.

Elucidating the mechanism of reversible oxiranations via magnetization transfer spectroscopy

The reversible [2 + 1] cycloadditions between an N,N'-diamidocarbene (DAC) and eight aldehydes were examined using NMR spectroscopy. Variable temperature magnetization transfer experiments revealed higher exchange rates and lower activation barriers when electron-deficient aldehydes were employed. Likewise, competitive equilibrium studies indicated a thermodynamic preference for electron-deficient aryl and sterically unhindered alkyl aldehydes compared to more electron-rich or bulkier substrates. Collectively, these and other data collected were consistent with the oxiranation process proceeding in an asynchronous manner.

Cooperative self-assembly: producing synthetic polymers with precise and concise primary structures

The quest to construct mechanically interlocked polymers, which present precise monodisperse primary structures that are produced both consistently and with high efficiencies, has been a daunting goal for synthetic chemists for many years. Our ability to realise this goal has been limited, until recently, by the need to develop synthetic strategies that can direct the formation of the desired covalent bonds in a precise and concise fashion while avoiding the formation of unwanted kinetic by-products. The challenge, however, is a timely and welcome one, as a consequence of, primarily, the potential for mechanically interlocked polymers to act as dynamic (noncovalent) yet robust (covalent) new materials for a wide array of applications. One such strategy which has been employed widely in recent years to address this issue, known as Dynamic Covalent Chemistry (DCC), is a strategy in which reactions operate under equilibrium and so offer elements of "proof-reading" and "error-checking" to the bond forming and breaking processes such that the final product distribution always reflects the thermodynamically most favourable compound. By coupling DCC with template-directed protocols, which utilise multiple weak noncovalent interactions to pre-organise and self-assemble simpler small molecular precursors into their desired geometries prior to covalent bond formation, we are able to produce compounds with highly symmetric, robust and complex topologies that are otherwise simply unobtainable by more traditional methods. Harnessing these strategies in an iterative, step-wise fashion brings us ever so much closer towards perfecting the controlled synthesis of high order main-chain mechanically interlocked polymers. This tutorial review focuses (i) on the development of DCC-namely, the formation of dynamic imine bonds-used in conjunction with template-directed protocols to afford a variety of mechanically interlocked molecules (MIMs) and ultimately (ii) on the synthesis of highly ordered poly[n]rotaxanes with high conversion efficiencies.

Design and assembly of rotaxane-based molecular switches and machines

Mechanically interlocked molecules, such as catenanes and rotaxanes, are at the heart of the development of molecular machines chemistry. They are able to self-organize, self-assemble, and self-control themselves into new materials with potential application as molecular devices. In this review, an overview of some recent progress on molecular machines is given, including new methodologies for their synthesis and self-assembly and their recent applications as dual or multilevel fluorescent molecular switches, as potential sensors, and even as a molecular-level transporter. In one development, a molecular machine containing a charge-transfer chromophore was designed to generate controllable aggregate structures through the reversible movement of a macrocycle over a thread; this was done in order to better understand the application of a molecular shuttle in solid state. Light is shed on how the novel properties and functions of molecular machines are extended, and examples of the ways in which molecular machines have been applied to the design and process of intelligentized systems are provided.

Multicomponent assembly of cavitand-based polyacylhydrazone nanocapsules

The thermodynamically controlled syntheses of different di-, tetra-, and hexacavitand polyacylhydrazone nanocapsules are reported. [2+4]-, [4+8]-, and [6+12]-nanocapsules assemble upon reacting a tetraformyl cavitand with two equivalents of isophthalic dihydrazide, or terephthalic dihydrazide in the presence of trifluoroacetic acid, whereby the building blocks are linked together through 8, 16, or 24 newly formed acylhydrazone bonds. Futhermore, the reaction of the tetraformylcavitands with different trigonal planar trihydrazides, simultaneously leads to the formation of [2+4]- and [6+8]-nanocapsules in varying ratios that depend on the cavitand to trihydrazide ratio and the nature of the cavitand and trihydrazide building blocks. The product ratios are rationalized with the different conformational strain of the acylhydrazone linkages in these nanocapsules. Diffusion NMR experiments with the hexacavitand polyacylhydrazone nanocapsules yield solvodynamic radii that range from 1.6 to 2.5 nm, consistent with estimates from force field calculations, and support, that these capsules have solvent filled, spherical interiors, the sizes of which approaches those of smaller proteins.

Synthesis of a molecular charm bracelet via click cyclization and olefin metathesis clipping

We describe the synthesis of a polycatenated cyclic polymer, a structure that resembles a molecular charm bracelet. Ruthenium-catalyzed ring-opening metathesis polymerization of an amino-containing cyclic olefin monomer in the presence of a chain transfer agent generated an alpha,omega-diazide functionalized polyamine. Cyclization of the resulting linear polyamine using pseudo-high-dilution copper-catalyzed click cyclization produced a cyclic polymer in 19% yield. The click reaction was then further employed to remove linear contaminants from the cyclic polymer using azide- and alkyne-functionalized scavenging resins, and the purified cyclic polymer product was characterized by gel permeation chromatography, (1)H NMR spectroscopy, and IR spectroscopy. Polymer hydrogenation and conversion to the corresponding polyammonium species enabled coordination and interlocking of diolefin polyether fragments around the cyclic polymer backbone using ruthenium-catalyzed ring-closing olefin metathesis to afford a molecular charm bracelet structure. This charm bracelet complex was characterized by (1)H NMR spectroscopy, and the catenated nature of the small rings was confirmed using two-dimensional diffusion-ordered NMR spectroscopy.