Affinity Adhesion of Carbohydrate Particles and Yeast Cells to Boronate-Containing Polymer Brushes Grafted onto Siliceous Supports

Mobile-Phase Modulators as Salt Tolerance Enhancers in Phenylboronate Chromatography: Thermodynamic Evaluation of the Mechanisms Underlying the Adsorption of Monoclonal Antibodies

Phenylboronate chromatography has been employed for bioseparation applications though details concerning the mechanisms of interaction between the ligand and macromolecules remain widely unknown. Here, the phenomena underlying the adsorption of an anti-human interleukin-8 (anti-IL8) monoclonal antibody (mAb) onto an m-aminophenylboronic acid (m-APBA) ligand in the presence of different mobile-phase modulators (NaF/MgCl ₂ /(NH ₄ ) ₂ SO ₄ ) and under different pH values (7.5/8.5/9.0) is investigated. Flow microcalorimetry (FMC) is applied to measure instantaneous heat energy transfer, providing insights about the role of specific and nonspecific interactions involved in the adsorptive process. Results show that the adsorption of anti-IL8 mAb to m-APBA is enthalpically driven, corroborating the presence of the reversible esterification reaction between boronic acid or boronates and cis-diol-containing molecules. Nevertheless, for all mobile-phase modulators studied, changes in thermogram profiles are observed as well as reductions in the net heat of adsorption when increasing the pH. Overall, FMC and parallel chromatographic experiments data suggest that ligand salt tolerance could be enhanced using mobile-phase modulators, with all salts studied promoting the specific cis-diol interactions and reducing nonspecific interactions. The last feature is more noticeable at pH values above ligand's pK _a , mainly due to the ability of NaF and (NH ₄ ) ₂ SO ₄ to diminish electrostatic interactions when compared to the commonly used NaCl.

Capacitive Saccharide Sensor Based on Immobilized Phenylboronic Acid with Diol Specificity

A capacitive sensor for saccharide detection is described in this study. The detection is based on selective interaction between diols and aminophenylboronic acid (APBA) immobilized on a gold electrode. Glucose, fructose, and dextran (MW: 40 kDa) were tested with the system over wide concentration ranges (1.0 x 10-8 M - 1.0 x 10-3 M for glucose, 1.0 x 10-8 M - 1.0 x 10-2 M for fructose and 1.0 x 10-10 M - 1.0 x 10-5 M for dextran). The limits of detection (LODs) were 0.8 nM for glucose, 0.6 nM for fructose, and 13 pM for dextran. These data were comparable to the others reported previously. In order to demonstrate glycoprotein detection with the same sensor, human immunoglobulin G (IgG) as well as horseradish peroxidase were used as model analytes. The sensor responded to IgG in the concentration range of 1.0 x 10-13 M - 1.0 x 10-7 M with a LOD value of 16 fM. The performance of the assay of peroxidase was compared to a spectrophotometric assay by determining the enzymatic activity of a captured analyte. The results showed that the method might be useful for label-free, fast, and sensitive detection of saccharides as well as glycoproteins over a wide concentration range.

Synthesis and Evaluation of Protein-Phenylboronic Acid Conjugates as Lectin Mimetics

Glycan-binding molecules, such as lectins, are very important tools for characterizing, imaging, or targeting glycans and are often involved in either physiological or pathological processes. However, their availability is far less compared to the diversity of native glycans. Therefore, development of lectin mimetics with desired specificity and affinity is in high demand. Boronic acid reacts with 1,2- and 1,3-diols of saccharides in aqueous media through reversible boronate ester formation and are regarded as synthetic lectin mimetics. In this study, bovine serum albumin (BSA)-phenylboronic acid (PBA) conjugates were synthesized in a density-controlled manner by targeting both aspartic and glutamic acids to afford lectin mimetics with multivalent PBA, as multivalency is a key factor for glycan recognition in both specificity and affinity. The resultant BSA-PBA conjugates were characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis. Their macrophage cell surface glycan-binding capacity was characterized by a competitive lectin-binding assay examined by flow cytometry, and 3-(4,5-di-methylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay showed biocompatibility. These novel lectin mimetics will find a broad range of applications as they can be wittingly modified, altering binding specificity and capacity.

Dynamic Covalent Hydrogels for Triggered Cell Capture and Release

A dual-responsive, cell capture and release surface was prepared through the incorporation of phenylboronic acid (PBA) groups into an oxime-based polyethylene glycol (PEG) hydrogel. Owing to its PEG-like properties, the unfunctionalized hydrogel was nonfouling. The use of highly efficient oxime chemistry allows the incorporation of commercially available 3,5-diformylphenyl boronic acid into the hydrogel matrix. Thus, the surface properties of the hydrogel were modified to enable reversible cell capture and release. Boronic ester formation between PBA groups and cell surface carbohydrates enabled efficient cell capture at pH 6.8. An increase to pH 7.8 resulted in cell detachment. This capture-and-release procedure was performed on MCF-7 human breast cancer cells, NIH-3T3 fibroblast cells, and primary human umbilical vein endothelial cells (HUVECs) and could be cycled with negligible loss in activity. The facile preparation of PBA-functionalized surfaces presented here has applications in biomedical fields such as cell diagnostics and cell culture.

Electrochemical bacterial detection using poly(3-aminophenylboronic acid)-based imprinted polymer

Biosensors can deliver the rapid bacterial detection that is needed in many fields including food safety, clinical diagnostics, biosafety and biosecurity. Whole-cell imprinted polymers have the potential to be applied as recognition elements in biosensors for selective bacterial detection. In this paper, we report on the use of 3-aminophenylboronic acid (3-APBA) for the electrochemical fabrication of a cell-imprinted polymer (CIP). The use of a monomer bearing a boronic acid group, with its ability to specifically interact with cis-diol, allowed the formation of a polymeric network presenting both morphological and chemical recognition abilities. A particularly beneficial feature of the proposed approach is the reversibility of the cis-diol-boronic group complex, which facilitates easy release of the captured bacterial cells and subsequent regeneration of the CIP. Staphylococcus epidermidis was used as the model target bacteria for the CIP and electrochemical impedance spectroscopy (EIS) was explored for the label-free detection of the target bacteria. The modified electrodes showed a linear response over the range of 10³-10⁷cfu/mL. A selectivity study also showed that the CIP could discriminate its target from non-target bacteria having similar shape. The CIPs had high affinity and specificity for bacterial detection and provided a switchable interface for easy removal of bacterial cell.

Glucose-responsive polymer vesicles templated by α-CD/PEG inclusion complex

Polymeric nanoparticles with glucose-responsiveness are of great interest in developing a self-regulated drug delivery system. In this work, glucose-responsive polymer vesicles were fabricated based on the complexation between a glucosamine (GA)-containing block copolymer PEG45-b-P(Asp-co-AspGA) and a phenylboronic acid (PBA)-containing block copolymer PEG114-b-P(Asp-co-AspPBA) with α-CD/PEG45 inclusion complex as the sacrificial template. The obtained polymer vesicles composed of cross-linked P(Asp-co-AspGA)/P(Asp-co-AspPBA) layer as wall and PEG chains as both inner and outer coronas. The vesicular morphology was observed by transmission electron microscopy (TEM), and the glucose-responsiveness was investigated by monitoring the variations of hydrodynamic diameter (Dh) and light scattering intensity (LSI) in the polymer vesicle solution with glucose using dynamic light scattering (DLS). Vancomycin as a model drug was encapsulated in the polymer vesicles and sugar-triggered drug release was carried out. This kind of polymer vesicle may be a promising candidate for glucose-responsive drug delivery.

High-efficiency immunoassay platforms with controllable surface roughness and oriented antibody immobilization

High-efficiency immunoassay platforms were facilely prepared by combining a layer-by-layer particle deposition with site-specific antibody immobilization through boronic acid moieties.

Efficient enrichment of glycopeptides using phenylboronic acid polymer brush modified silica microspheres

Phenylboronic acid (PBA) polymer brush modified silica demonstrated high selectivity for glycopeptides attributed to the synergistic effect of polyvalent interactions, hydrogen binding and hydrophilic nature provided by the polymer brush.

Fabrication of a detection platform with boronic-acid-containing zwitterionic polymer brush

Development of technologies for biomedical detection platform is critical to meet the global challenges of various disease diagnoses, especially for point-of-use applications. Because of its natural simplicity, effectiveness, and easy repeatability, random covalent-binding technique is widely adopted in antibody immobilization. However, its antigen-binding capacity is relatively low when compared to site-specific immobilization of antibody. Herein, we report that a detection platform modified with boronic acid (BA)-containing sulfobetaine-based polymer brush. Mainly because of the advantage of oriented immobilization of antibody endowed with BA-containing three-dimensional polymer brush architecture, the platform had a high antigen-binding capacity. Notably, nonspecific protein adsorption was also suppressed by the zwitterionic pendants, thus greatly enhanced signal-to-noise (S/N) values for antigen recognition. Furthermore, antibodies captured by BA pendants could be released in dissociation media. This new platform is promising for potential applications in immunoassays.

BSA-boronic acid conjugate as lectin mimetics

We report bovine serum albumin (BSA)-boronic acid (BA) conjugates as lectin mimetics and their glyco-capturing capacity. The BSA-BA conjugates were synthesized by amidation of carboxylic acid groups in BSA with aminophenyl boronic acid in the presence of EDC, and were characterized by Alizarin Red S (ARS) assay and SDS-PAGE gel. The BSA-BA conjugates were immobilized onto maleimide-functionalized silica beads and their sugar capturing capacity and specificity were confirmed by ARS displacement assay. Further, surface plasmon resonance (SPR) analysis of the glyco-capturing activity of the BSA-BA conjugates was conducted by immobilizing BSA-BA onto SPR gold chip. Overall, we demonstrated a BSA-BA-based lectin mimetics for glyco-capturing applications. These lectin mimetics are expected to provide an important tool for glycomics and biosensor research and applications.

Phenylboronic acid-functionalized polymeric micelles with a HepG2 cell targetability

Phenylboronic acid-functionalized amphiphilic block copolymer Pluronic-PMCC-BA was synthesized via ring-opening polymerization of 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one (MBC) with fumaric acid as a catalyst followed by the deprotection of carboxyl groups by catalyzed hydrogenation and the condensation of 3-aminophenylboronic acid with the copolymer side groups. Pluronic-PMCC-BA can form stable micelle solution by self-assembly in water. The phenylboronic acid groups are located at the shell of micelle as proved by (1)H NMR. The diameter of drug-free micelles is approximate 60 nm. Nano-spheres with narrow size distribution could be observed in the TEM image. MTT assay results show that Pluronic-PMCC-BA exhibits slight cytotoxicity when the polymer concentration is higher than 25 μg mL(-1). The toxicities of DOX@Pluronic-PMCC and DOX@Pluronic-PMCC-BA to COS7, HeLa, and HepG2 cell lines are similar with those of free DOX. Interestingly, phenylboronic acid groups located at the surface of Pluronic-PMCC-BA micelles can recognize HepG2 cells and promote the drug uptake of the cells, which are observed by confocal laser scanning microscopy (CLSM). The results imply that Pluronic-PMCC-BA would be a promising material for targeted drug delivery to the cancer cells.

The development of boronic acids as sensors and separation tools

Synthetic receptors for diols that incorporate boronic acid motifs have been developed as new sensors and separation tools. Utilizing the reversible interactions of diols with boronic acids to form boronic esters under new binding regimes has provided new hydrogel constructs that have found use as dye-displacement sensors and electrophoretic separation tools; similarly, molecular boronic-acid-containing chemosensors were constructed that offer applications in the sensing of diols. This review provides a somewhat-personal perspective of developments in boronic-acid-mediated sensing and separation, placed in the context of the seminal works of others in the area, as well as offering a concise summary of the contributions of the co-authors in the area.

Phenylboronic-acid-modified amphiphilic polyether as a neutral gene vector

A phenylboronic-acid-modified amphiphilic block polyether is prepared via reaction of polyglycidol-block-poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide)-block-polyglycidol (Pluronic-PG) with 2-(N,N-dimethylaminomethyl)-5-aminomethyl phenylboronic acid using phosgene as a coupling reagent. The boronic-acid-modified non-cationic polymer binds plasmid pGL3 effectively, forms sub-µm polymer/DNA complex particles, and greatly facilitates the cell uptake of the plasmid. The efficiency of the polymer as a gene vector is evaluated in vitro by transfection of pGL3 to HeLa, COS-7 and HepG2 cells. Pluronic-PG-BA enhances the transfection efficiency by 100 to 1000 times compared with Pluronic-PG. The presence of serum does not significantly affect the transfection efficiency.

Reversible conformational transitions of a polymer brush containing boronic acid and its interaction with mucin glycoprotein

Reversible changes of the height of a polymer brush containing phenylboronic acid were studied. The polymer brush thickness underwent reversible changes of 0.5-1 nm, in response to the changes in composition of the contacting aqueous phase from deionized water to bicarbonate buffer and vice versa, apparently due to the conformational transition of the weak polyelectrolyte to the more extended electrically charged state. Adsorption of mucin glycoprotein to the polymer brush took place due to boronate/sugar interactions between the glycoprotein and the graft copolymer and resulted in further increase of the brush height by ca. 1.5 nm, as observed by means of spectral correlation spectroscopy and ellipsometry.

Synthesis and application of novel phenylboronate affinity materials based on organic polymer particles for selective trapping of glycoproteins

We report on synthesis concepts for the fabrication of various novel phenylboronate affinity materials based on polymethacrylate epoxy beads (Fractogel EMD Epoxy (M) 40-90 microm) and the testing of these functionalized polymer particles for selective trapping of a glycoprotein from a standard mixture containing a glycosylated and a nonglycosylated protein. Two inherently different approaches for the functionalization of the bare beads with boronate groups have been elucidated. In the first, the epoxy residues of the polymer particles were converted into reactive thiol groups which were subsequently used as anchor moieties for the immobilization of 4-vinylphenylboronic acid by radical addition or radical polymerization reaction. Three different ways for the generation of sulfhydryl groups have been examined leading to materials with distinct linker chemistries. In the second and more straightforward approach, the epoxy groups were reacted with 4-mercaptophenylboronic acid. The novel materials were thoroughly characterized by (i) quantitation of the sulfur content by elemental analysis, (ii) reactive sulfhydryls were determined in a photospectrometric assay, (iii) boron content was measured by inductively coupled plasma-atomic emission spectrometry, and (iv) the amount of reactive boronate groups was evaluated in a fast binding assay employing adenosine as test compound. A maximum concentration of 1.2 mmol boronate groups per gram dry beads could be achieved by the presented synthesis routes. Employing the novel phenylboronate affinity materials in capture and release experiments in the batch mode, a standard glycoprotein, viz. transferrin (Tf) from human serum was separated from a nonglycosylated protein, BSA. A commercial boronate affinity material based on 3-aminophenylboronic acid modified agarose gel was employed as reference material and was found to perform significantly worse compared to the herein presented novel polymethacrylate particles.