Catalytic Applications of Metal Nanoparticles in Imidazolium Ionic Liquids

Recent Advances Hydrogenation of Carbon Dioxide to Light Olefins over Iron-Based Catalysts via the Fischer-Tropsch Synthesis

The massive burning of fossil fuels has been important for economic and social development, but the increase in the CO2 concentration has seriously affected environmental sustainability. In industrial and agricultural production, light olefins are one of the most important feedstocks. Therefore, the preparation of light olefins by CO2 hydrogenation has been intensively studied, especially for the development of efficient catalysts and for the application in industrial production. Fe-based catalysts are widely used in Fischer-Tropsch synthesis due to their high stability and activity, and they also exhibit excellent catalytic CO2 hydrogenation to light olefins. This paper systematically summarizes and analyzes the reaction mechanism of Fe-based catalysts, alkali and transition metal modifications, interactions between active sites and carriers, the synthesis process, and the effect of the byproduct H2O on catalyst performance. Meanwhile, the challenges to the development of CO2 hydrogenation for light olefin synthesis are presented, and future development opportunities are envisioned.

Stereoselective Reduction of Steroidal 4-Ene-3-ketones in the Presence of Biomass-Derived Ionic Liquids Leading to Biologically Important 5β-Steroids

The stereoselective reduction of the steroidal 4-ene-3-ketone moiety (enone) affords the 5β-steroid backbone that is a key structural element of biologically important neuroactive steroids. Neurosteroids have been currently studied as novel and potent central nervous system drug-like compounds for the treatment of, e.g., postpartum depression. As a green methodology, we studied the palladium-catalyzed hydrogenation of steroidal 4-ene-3-ketones in the presence of ionic liquids derived from natural carboxylic acids. The hydrogenation proceeds with improved 5β-selectivity in the presence of tetrabutylammonium carboxylates as additives compared to the exclusive use of an organic solvent. Under optimal conditions, using tetrabutylammonium d-mandelate, the reduction of testosterone led to 5β-dihydrotestosterone in high yield and stereoselectivity and no byproduct formation was observed. Moreover, the catalyst could be recycled. The presence of additional substituents on the steroid backbone showed a significant effect on the 5β-selectivity.

A High-Performance Cr2O3/CaCO3 Nanocomposite Catalyst for Rapid Hydrogen Generation from NaBH4

This study aims to prepare new nanocomposites consisting of Cr2O3/CaCO3 as a catalyst for improved hydrogen production from NaBH4 methanolysis. The new nanocomposite possesses nanoparticles with the compositional formula Cr2-xCaxO3 (x = 0, 0.3, and 0.6). These samples were prepared using the sol-gel method, which comprises gelatin fuel. The structure of the new composites was studied using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, environmental scanning electron microscopy (ESEM), and X-ray spectroscopy (XPS). The XRD data showed the rhombohedral crystallinity of the studied samples, and the average crystal size was 25 nm. The FTIR measurements represented the absorption bands of Cr2O3 and CaO. The ESEM micrographs of the Cr2O3 showed the spherical shape of the Cr2O3 nanoparticles. The XPS measurements proved the desired oxidation states of the Cr2-xCaxO3 nanoparticles. The optical band gap of Cr2O3 is 3.0 eV, and calcium doping causes a reduction to 2.5 and 1.3 eV at 15.0 and 30.0% doping ratios. The methanolysis of NaBH4 involved accelerated H2 production when using Cr2-xCaxO3 as a catalyst. Furthermore, the Cr1.7Ca0.3O3 catalyst had the highest hydrogen generation rate, with a value of 12,750 mL/g/min.

An Unusual Microdomain Factor Controls Interaction of Organic Halides with the Palladium Phase and Influences Catalytic Activity in the Mizoroki-Heck Reaction

In this work, using a combination of scanning and transmission electron microscopy (SEM and TEM), the transformations of palladium-containing species in imidazolium ionic liquids in reaction mixtures of the Mizoroki-Heck reaction and in related organic media are studied to understand a challenging question of the relative reactivity of organic halides as key substrates in modern catalytic technologies. The microscopy technique detects the formation of a stable nanosized palladium phase under the action of an aryl (Ar) halide capable of forming microcompartments in an ionic liquid. For the first time, the correlation between the reactivity of the aryl halide and the microdomain structure is observed: Ar-I (well-developed microdomains) > Ar-Br (microphase present) > Ar-Cl (minor amount of microphase). Previously, it is assumed that molecular level factors, namely, carbon-halogen bond strength and the ease of bond breakage, are the sole factors determining the reactivity of aryl halides in catalytic transformations. The present work reports a new factor connected with the nature of the organic substrates used and their ability to form a microdomain structure and concentrate metallic species, highlighting the importance of considering both the molecular and microscale properties of the reaction mixtures.

Confined Silver Nanoparticles in Ionic Liquid Films

This work reports the formation of silver nanoparticles (AgNPs) by sputter deposition in thin films of three different ionic liquids (ILs) with the same anion (bis(trifluoromethylsulfonyl)imide) and cation (imidazolium), but with different alkyl chain lengths and symmetries in the cationic moiety ([C4C1im][NTf2], [C2C2im][NTf2], and [C5C5im][NTf2]). Ionic liquid (IL) films in the form of microdroplets with different thicknesses (200 to 800 monolayers) were obtained through vacuum thermal evaporation onto glass substrates coated with indium tin oxide (ITO). The sputtering process of the Ag onto the ILs when conducted simultaneously with argon plasma promoted the coalescence of the ILs’ droplets and the formation, incorporation, and stabilization of the metallic nanoparticles in the coalesced IL films. The formation/stabilization of the AgNPs in the IL films was confirmed using high-resolution scanning electron microscopy (SEM) and UV-Vis spectroscopy. It was found that the IL films with larger thicknesses (600 and 800 monolayers) were better media for the formation of AgNPs. Among the ILs used, [C5C5im][NTf2] was found to be particularly promising for the stabilization of AgNPs. The use of larger IL droplets as capture media was found to promote a better stabilization of the AgNPs, thereby reducing their tendency to aggregate.

Elemental (im-)miscibility determines phase formation of multinary nanoparticles co-sputtered in ionic liquids

Non-equilibrium synthesis methods allow the alloying of bulk-immiscible elements into multinary nanoparticles, which broadens the design space for new materials. Whereas sputtering onto solid substrates can combine immiscible elements into thin film solid solutions, this is not clear for sputtering of nanoparticles in ionic liquids. Thus, the suitability of sputtering in ionic liquids for producing nanoparticles of immiscible elements is investigated by co-sputtering the systems Au-Cu (miscible), Au-Ru and Cu-Ru (both immiscible), and Au-Cu-Ru on the surface of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Bmim][(Tf)₂N]. The sputtered nanoparticles were analyzed to obtain (i) knowledge concerning the general formation process of nanoparticles when sputtering onto ionic liquid surfaces and (ii) information, if alloy nanoparticles of immiscible elements can be synthesized as well as (iii) evidence if the Hume-Rothery rules for solid solubility are valid for sputtered nanoparticles. Nanoparticle characteristics were found to depend on elemental miscibility: (1) nanoparticles from immiscible elemental combinations showed bigger mean diameters ranging from (3.3 ± 1.4) nm to (5.0 ± 1.7) nm in contrast to mean diameters of nanoparticles from elemental combinations with at least one miscible element pair ((1.7 ± 0.7) nm to (1.8 ± 0.6) nm). (2) Nanoparticles from immiscible combinations showed compositions with one element strongly dominating the ratio and very narrow differences between the highest and lowest fraction of the dominating element (Cu₉₄Ru₆ to Cu₁₀₀Ru₀; Au₉₆Ru₄ to Au₉₉Ru₁) in contrast to the other compositions (Au₆₄Cu₃₆ to Au₈₁Cu₁₉; Au₈₃Cu₁₃Ru₄/Au₇₅Cu₂₂Ru₃ to Au₈₇Cu₁₁Ru₂). Accompanying atomistic simulations using density-functional theory for clusters of different size and ordering confirm that the miscibility of Au-Cu and the immiscibility of Au-Ru and Cu-Ru govern the thermodynamic stability of the nanoparticles. Based on the matching experimental and theoretical results for the NP/IL-systems concerning NP stability, a formation model of multinary NPs in ILs was developed.

Tuning the activity and selectivity of polymerised ionic liquid-stabilised ruthenium nanoparticles through anion exchange reactions

The development of highly active and selective heterogeneous-based catalysts with tailorable properties is not only a fundamental challenge, but is also crucial in the context of energy savings and sustainable chemistry. Here, we show that ruthenium nanoparticles (RuNPs) stabilised with simple polymerised ionic liquids (PILs) based on N-vinyl imidazolium led to highly active and robust nano-catalysts in hydrogenation reactions, both in water and organic media. Of particular interest, their activity and selectivity could simply be manipulated through counter-anion exchange reactions. Hence, as a proof of concept, the activity of RuNPs could be reversibly turned on and off in the hydrogenation of toluene, while in the case of styrene, the hydrogenation could be selectively switched from ethylbenzene to ethylcyclohexane upon anion metathesis. According to X-ray photoelectron spectroscopy (XPS) and dynamic light scattering (DLS) analyses, these effects could originate not only from the relative hydrophobicity and solvation of the PIL corona but also from the nature and strength of the PIL-Ru interactions.

Dual Nickel/Photoredox-Catalyzed Deaminative Cross-Coupling of Sterically Hindered Primary Amines

We report a method to activate α-3° amines for deaminative arylation via condensation with an electron-rich aldehyde and merge this reactivity with nickel metallaphotoredox to generate benzylic quaternary centers, a common motif in pharmaceuticals and natural products. The reaction is accelerated by added ammonium salts. Evidence is provided in support of two roles for the additive: inhibition of nickel black formation and acceleration of the overall reaction rate. We demonstrate a robust scope of amine and haloarene coupling partners and show an expedited synthesis of ALK2 inhibitors.

Direct Synthesis of Formic acid from Carbon Dioxide by Hydrogenation over Ruthenium Metal Doped Titanium Dioxide Nanoparticles in Functionalized Ionic Liquid

Background:

Presently worldwide manufacturing of formic acid follows the permutation of methanol and carbon monoxide in presence of a strong base. But due to the use of toxic CO molecule and easy availability of CO2 molecule in the atmosphere, most of the research has been shifted from the conventional method of formic acid synthesis to direct hydrogenation of CO2 gas using different homogenous and heterogeneous catalysts.

Objective:

To develop reaction protocol to achieve easy CO2 hydrogenation to formic acid using Ionic liquid reaction medium.

Methods:

We used the sol-gel method followed by calcination (over 250oC for 5 hours) to synthesize two types of ruthenium metal-doped TiO2 nanoparticles (with and without ionic liquids), namely Ru@TiO2@IL and Ru@TiO2. We are reporting the application NR2 (R= CH3) containing imidazolium- based ionic liquids not only to achieve a good reaction rate but also to get agglomeration free ruthenium metal-doped TiO2 nanoparticles along with easy product isolation due to the presence of NR2 (R= CH3) functionality in ionic liquid structure. We synthesized various NR2 (R= CH3) functionalized ionic liquids such as 1-Butyl-3-methylimidazolium Chloride, 1,3-di(N,Ndimethylaminoethyl)- 2-methylimidazolium trifluoromethanesulfonate ([DAMI][TfO]), 1,3-di(N,Ndimethylaminoethyl)- 2-methylimidazolium bis (trifluoromethylsulfonyl) imide ([DAMI][NTf2]) and 1-butyl-3-methylimidazolium chloride ionic liquids which were synthesized as per the reported procedure.

Results:

We easily developed two types of Ru metal-doped TiO2 nanoparticles using the sol-gel method. After calcination, both Ru@TiO2@IL (3.2 wt% Ru), and Ru@TiO2 (1.7 wt% Ru) materials were characterized by XRD, FTIR, TEM, ICP-AES, EDS, and XANES analysis. After understanding the correct structural arrangement of Ru metal over TiO2 support, we utilized both Ru@TiO2@IL (3.2 wt% Ru) and Ru@TiO2 (1.7 wt% Ru) the materials as a catalyst for direct hydrogenation of CO2 in the presence of water and functionalized [DAMI] [TfO] ionic liquid.

Conclusion:

Here we demonstrated the preparation and characterization of TiO2 supported Ru nanoparticles with and without ionic liquid. After understanding the correct morphology and physiochemical analysis of Ru@TiO2@IL (3.2 wt% Ru), and Ru@TiO2 (1.7 wt% Ru) catalysts, we examined their application in CO2 reduction and formic acid synthesis. During the optimization, we also noticed the significant effect of functionalized [DAMI] [TfO] ionic liquid and water to improve the formic acid yield. Lastly, we also checked the stability of the catalyst by recycling the same till the 7th run.

N-Functionalised Imidazoles as Stabilisers for Metal Nanoparticles in Catalysis and Anion Binding

Metal nanoparticles (NPs) have physicochemical properties which are distinct from both the bulk and molecular metal species, and provide opportunities in fields such as catalysis and sensing. NPs typically require protection of their surface to impede aggregation, but these coatings can also block access to the surface which would be required to take advantage of their unusual properties. Here, we show that alkyl imidazoles can stabilise Pd, Pt, Au, and Ag NPs, and delineate the limits of their synthesis. These ligands provide an intermediate level of surface protection, for which we demonstrate proof‐of‐principle in catalysis and anion binding.

Ionic Liquids and Ohmic Heating in Combination for Pd-catalyzed Cross-coupling Reactions: Sustainable Synthesis of Flavonoids

In order to meet the increasing demand for environmentally benign chemical processes, we developed a Suzuki–Miyaura reaction protocol based on the combination of ohmic heating (ΩH) and supported ionic liquid phase catalysis (SILPC) in aqueous media. This methodology was applied to the synthesis of a series of flavonoid derivatives, including isoflavones, styrylisoflavones, and diarylalkenylisoflavones.

On the Effects of Diluted and Mixed Ionic Liquids as Liquid Substrates for the Sputter Synthesis of Nanoparticles

The synthesis of nanoparticles by combinatorial sputtering in ionic liquids is a versatile approach for discovering new materials. Whereas the influence on nanoparticle formation of different pure ionic liquids has been addressed, the influence of (I) dilution of ionic liquid with solvents and (II) different mixtures of ionic liquids is less known. Therefore, mixtures of the ionic liquid [Bmim][(Tf)₂N] with the organic solvent anisole and other ionic liquids ([Bmim][(Pf)₂N], [BmPyr][(Tf)₂N]) were used as liquid substrates for the sputter synthesis of nanoparticles, in order to investigate the influence of these mixtures on the size of the nanoparticles. First, mixtures of anisole with a suspension of sputtered Ag nanoparticles in [Bmim][(Tf)₂N] were prepared in different volumetric steps to investigate if the stabilization of the NPs by the ionic liquid could be reduced by the solvent. However, a continuous reduction in nanoparticle size and amount with increasing anisole volume was observed. Second, Ag, Au and Cu were sputtered on ionic liquid mixtures. Ag nanoparticles in [Bmim][(Tf)₂N]/[Bmim][(Pf)₂N] mixtures showed a decrease in size with the increasing volumetric fraction of [Bmim][(Tf)₂N], whereas all nanoparticles obtained from [Bmim][(Tf)₂N]/[BmPyr][(Tf)₂N] mixtures showed increasing size and broadening of the size distribution. Maximum sizes of sputtered Ag and Au NPs were reached in mixtures of [Bmim][(Tf)₂N] with 20 vol.% and 40 vol.% [BmPyr][(Tf)₂N]. The results indicate that ionic liquid mixtures with different portions of cations and anions have the capability of influencing the ionic liquid stabilization characteristics with respect to, e.g., nanoparticle size and size distribution.

Methylene Blue Catalytic Degradation Using Silver and Magnetite Nanoparticles Functionalized with a Poly(ionic liquid) Based on Quaternized Dialkylethanolamine with 2-Acrylamido-2-methylpropane Sulfonate-co-Vinylpyrrolidone

Catalytic degradation of organic water pollutants has emerged as a cost- and energy-effective technique to treat wastewater. In this work, new silver and magnetite nanoparticles (NPs) were prepared with a protic poly(ionic liquid) (PIL) based on a quaternized diethylethanolamine cation combined with 2-acrylamido-2-methylpropane sulfonate-co-vinylpyrrolidone (QAMPSA/VP) as a capping and a reducing agent. The morphology, particle size, surface charge, thermal stability, and magnetic properties of QAMPS/VP-Ag and Fe₃O₄ NPs were investigated to determine the efficiency of the PIL as a reducing and a capping agent to protect the produced NPs from oxidation or thermal degradation. The activation energy, enthalpy, and entropy of the catalytic degradation of the cationic methylene blue (MB) dye in the presence of QAMPS/VP-Ag and Fe₃O₄ NPs were determined. The data elucidated that MB was completely degraded in 8 min in the presence of QAMPS/VP-Fe₃O₄ NPs as a Fenton oxidation catalyst. Moreover, their good magnetic properties allowed their easy separation and reuse for five cycles without losing their magnetic or catalytic properties.

Synthesis of plasmonic Fe/Al nanoparticles in ionic liquids

Bottom-up and top-down approaches are described for the challenging synthesis of Fe/Al nanoparticles (NPs) in ionic liquids (ILs) under mild conditions. The crystalline phase and morphology of the metal nanoparticles synthesized in three different ionic liquids were identified by powder X-ray diffractometry (PXRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), selected-area electron diffraction (SAED) and fast Fourier transform (FFT) of high-resolution TEM images. Characterization was completed by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) for the analysis of the element composition of the whole sample consisting of the NPs and the amorphous background. The bottom-up approaches resulted in crystalline FeAl NPs on an amorphous background. The top-down approach revealed small NPs and could be identified as Fe₄Al₁₃ NPs which in the IL [OPy][NTf₂] yield two absorption bands in the green-blue to green spectral region at 475 and 520 nm which give rise to a complementary red color, akin to appropriate Au NPs.

Fe/Al NPs of the right size mimic with their red color the electronic surface structure of Au NPs.

Gold nanoparticles stabilized by PEG-tagged imidazolium salts as recyclable catalysts for the synthesis of propargylamines and the cycloisomerization of γ-alkynoic acids

Water-soluble gold nanoparticles prepared in the presence of PEG-tagged tris-imidazolium bromide, containing Au(0) and Au(i) species, are reusable catalysts.

Methods of Gold and Silver Nanoparticles Preparation

The versatile family of nanoparticles is considered to have a huge impact on the different fields of materials research, mostly nanoelectronics, catalytic chemistry and in study of cytocompatibility, targeted drug delivery and tissue engineering. Different approaches for nanoparticle preparation have been developed, not only based on "bottom up" and "top down" techniques, but also several procedures of effective nanoparticle modifications have been successfully used. This paper is focused on different techniques of nanoparticles' preparation, with primary focus on metal nanoparticles. Dispergation methods such as laser ablation and vacuum sputtering are introduced. Condensation methods such as reduction with sodium citrate, the Brust-Schiffrin method and approaches based on ultraviolet light or biosynthesis of silver and gold are also discussed. Basic properties of colloidal solutions are described. Also a historical overview of nanoparticles are briefly introduced together with short introduction to specific properties of nanoparticles and their solutions.

Combinatorial Synthesis of Binary Nanoparticles in Ionic Liquids by Cosputtering and Mixing of Elemental Nanoparticles

Binary alloy nanoparticles were fabricated by two combinatorial methods: (I) cosputtering from elemental targets into the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Bmim][(Tf)₂N] and (II) by mixing elemental nanoparticles after sputtering them separately into [Bmim][(Tf)₂N]. Both methods lead to the formation of Au-Cu nanoparticles (2.3 nm for cosputtered, 3.6 nm for mixed), however with different resulting compositions: cosputtered nanoparticles show a composition range of Au_80-90Cu_20-10; mixing of Au- and Cu-loaded ionic liquids leads to the formation of Au₇₅Cu₂₅ nanoparticles. Annealing the binary nanoparticles at 100 °C shows that the mixed nanoparticles grow to sizes of 4.1 nm, whereas the cosputtered nanoparticles grow only to 3 nm.

Metal Nanoparticles as Green Catalysts

Nanoparticles play a significant role in various fields ranging from electronics to composite materials development. Among them, metal nanoparticles have attracted much attention in recent decades due to their high surface area, selectivity, tunable morphologies, and remarkable catalytic activity. In this review, we discuss various possibilities for the synthesis of different metal nanoparticles; specifically, we address some of the green synthesis approaches. In the second part of the paper, we review the catalytic performance of the most commonly used metal nanoparticles and we explore a few roadblocks to the commercialization of the developed metal nanoparticles as efficient catalysts.

NHC stabilized Pd nanoclusters in the Mizoroki–Heck reaction within microemulsion: exploring the role of imidazolium salt in rate enhancement

Significant rate enhancement of the Mizoroki–Heck reaction by in situ generated palladium nanoclusters within the confined space of water-in-oil mixed microemulsion in the presence of novel imidazo[1,5-α]pyridinium chlorides as N-heterocyclic carbene (NHC) precursors is reported.

Stabilization of Nanoparticles Produced by Hydrogenation of Palladium-N-Heterocyclic Carbene Complexes on the Surface of Graphene and Implications in Catalysis

Palladium nanoparticles (NPs) have been obtained by decomposition of well-defined palladium complexes noncovalently anchored onto the surface of reduced graphene oxide. Morphological analysis by microscopy showed the presence of small palladium NPs homogeneously distributed on the support. Characterization by X-ray photoelectron spectroscopy confirmed that palladium NPs contain Pd(2+) and Pd(0) oxidation states and the presence of N-heterocyclic carbene and bromo ligands. The catalytic properties of the NPs with and without the support have been evaluated in the hydrogenation of alkynes. Supported palladium NPs showed increased activity versus the nonsupported ones and could be recycled up to 10 times without the loss of catalytic activity. The composition of the palladium NPs is different for each catalytic cycle indicating a dynamic process and the formation of different catalytic active species. On the contrary, the unsupported palladium NPs showed limited activity caused by decomposition and could not be recycled. The role of the support has been investigated. The results indicate that the support influences the stability of palladium NPs.

Organic Synthesis: New Vistas in the Brazilian Landscape

In this overview, we present our analysis of the future of organic synthesis in Brazil, a highly innovative and strategic area of research which underpins our social and economical progress. Several different topics (automation, catalysis, green chemistry, scalability, methodological studies and total syntheses) were considered to hold promise for the future advance of chemical sciences in Brazil. In order to put it in perspective, contributions from Brazilian laboratories were selected by the citations received and importance for the field and were benchmarked against some of the most important results disclosed by authors worldwide. The picture that emerged reveals a thriving area of research, with new generations of well-trained and productive chemists engaged particularly in the areas of green chemistry and catalysis. In order to fulfill the promise of delivering more efficient and sustainable processes, an integration of the academic and industrial research agendas is to be expected. On the other hand, academic research in automation of chemical processes, a well established topic of investigation in industrial settings, has just recently began in Brazil and more academic laboratories are lining up to contribute. All these areas of research are expected to enable the future development of the almost unchartered field of scalability.

Rapid Assessment of Sputtered Nanoparticle Ionic Liquid Combinations

A high-throughput method is presented for the efficient assessment of the formation and stability of nanoparticle suspensions in ionic liquids which differ in their cations and anions. As a proof of principle, Ag was sputtered on a cavity array filled with 9 different ionic liquids. Not all nanoparticle ionic liquid combinations form a stable suspension with separated nanoparticles. Directly after synthesis, the formation of nonagglomerated nanoparticle suspensions with sizes from 4 to 9 nm is observed by transmission electron microscopy as well as different time dependencies of the suspension stabilities. Only 3 out of the tested 9 nanoparticle ionic liquid suspensions show long-term stability: Stable suspension of spherical nanoparticles are formed in the ionic liquids 1-butyl-3-methylimidazolium bis(perfluoroethylsulfonyl)imide [Bmim][(Pf)₂N], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [Bmim][(Tf)₂N], and 1-butyl-1-methylpyrrolidinum bis(trifluoromethylsulfonyl)imide [BmPyr][(Tf)₂N].

Facile Ionic Liquid-Assisted Strategy for Direct Precipitation of Eu2+ -Activated Nanophosphors under Ambient Conditions

This work describes a novel ionic liquid (IL)-assisted synthesis strategy for a direct and easy production of Eu²⁺ -doped nanoparticles (NPs), where ILs are also used as fluoride sources to avoid the use of elemental fluorine or toxic hydrofluoric acid. Up to now, the direct synthesis of Eu²⁺ -doped nanophosphors consisted of an enormous challenge, due to the oxidation to Eu³⁺ observed in hydrous solution, which is commonly used for the preparation of NPs, generating lattice defects and undesired particle growth or agglomeration by additional reducing steps at high temperatures. In contrast, ILs, unless containing ClO₄^- or NO₃^- anions, do not present an oxidizing character, allowing the direct precipitation of NPs, e.g., using Eu²⁺ containing starting materials. Here, the undoped and Eu²⁺ -doped BaFCl NPs have been prepared under atmospheric conditions for the first time using ILs as solvents and also as fluoride source, applying sonochemical and microwave-assisted approaches. In general, this method bears an enormous potential for an easy synthesis of fluoride materials compared to inconvenient solid-state methods. In addition, the IL plays the role of a strongly attached protecting shell which represents ≈7-8% of the total NPs weight.

Ionic liquid and nanoparticle hybrid systems: Emerging applications

Having novel electronic and optical properties that emanate from their nano-scale dimensions, nanoparticles are central to numerous applications. Ionic liquids can confer to nanoparticle chemical protection and physicochemical property enhancement through intermolecular interactions and can consequently improve the stability and reusability of nanoparticle for various operations. With an aim to combine the novel properties of nanoparticles and ionic liquids, different structures have been generated, based on a balance of several intermolecular interactions. Such ionic liquid and nanoparticle hybrids are showing great potential in diverse applications. In this review, we first introduce various types of ionic liquid and nanoparticle hybrids, including nanoparticle colloidal dispersions in ionic liquids, ionic liquid-grafted nanoparticles, and nanoparticle-stabilized ionic liquid-based emulsions. Such hybrid materials exhibit interesting synergisms. We then highlight representative applications of ionic liquid and nanoparticle hybrids in the catalysis, electrochemistry and separations fields. Such hybrids can attain better stability and higher efficiency under a broad range of conditions. Novel and enhanced performance can be achieved in these applications by combining desired properties of ionic liquids and of nanoparticles within an appropriate hybrid nanostructure.

Intracellular Accumulation of Gold Nanoparticles Leads to Inhibition of Macropinocytosis to Reduce the Endoplasmic Reticulum Stress

Understanding the toxicity of nanomaterials remains largely limited to acute cellular response, i.e., short-term in vitro cell-death based assays, and analyses of tissue- and organ-level accumulation and clearance patterns in animal models, which have produced very little information about how these materials (from the toxicity point of view) interact with the complex intracellular machinery. In particular, understanding the mechanism of toxicity caused by the gradual accumulation of nanomaterials due to prolonged exposure times is essential yet still continue to be a largely unexplored territory. Herein, we show intracellular accumulation and the associated toxicity of gold nanoparticles (AuNPs) for over two-months in the cultured vascular endothelial cells. We observed that steady exposure of AuNPs at low (non-lethal) dose leads to rapid intracellular accumulation without causing any detectable cell death while resulting in elevated endoplasmic reticulum (ER) stress. Above a certain intracellular AuNP threshold, inhibition of macropinocytosis mechanism ceases further nanoparticle uptake. Interestingly, the intracellular depletion of nanoparticles is irreversible. Once reaching the maximum achievable intracellular dose, a steady depletion is observed, while no cell death is observed at any stage of this overall process. This depletion is important for reducing the ER stress. To our knowledge, this is the first report suggesting active regulation of nanoparticle uptake by cells and the impact of long-term exposure to nanoparticles in vitro.