Facile synthesis of gold nanoparticles with narrow size distribution by using AuCl or AuBr as the precursor

Experimental High-Resolution Observation of the Truncated Double-Icosahedron Structure: A Stable Twinned Shell in Alloyed Au-Ag Core@Shell Nanoparticles

Given the binary nature of nanoalloy systems, their properties are dependent on their size, shape, structure, composition, and chemical ordering. When energy and entropic factors for shapes and structure variations are considered in nanoparticle growth, the spectra of shapes become so vast that even metastable arrangements have been reported under ambient conditions. Experimental and theoretical variations of multiply twinned particles have been observed, from the Ino and Marks decahedra to polyicosahedra and polydecahedra with comparable energetic stability among them. Herein, we report the experimental production of a stable doubly truncated double-icosahedron structure (TdIh) in Au-Ag nanoparticles, in which a twinned Ag-rich alloyed shell is reconstructed on a Au-Ag alloyed Ino-decahedral core. The structure, chemical composition, and growth pathway are proposed on the basis of high-angle annular dark-field scanning transmission electron microscopy analysis and excess energy calculations, while its structural stability is estimated by large-scale atomic molecular dynamics simulations. This novel nanostructure differs from other structures previously reported.

The Interaction of Amines with Gold Nanoparticles

Understanding the interactions between amines and the surface of gold nanoparticles is important because of their role in the stabilization of the nanosystems, in the formation of the protein corona, and in the preparation of semisynthetic nanozymes. By using fluorescence spectroscopy, electrochemistry, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and molecular simulation, a detailed picture of these interactions is obtained. Herein, it is shown that amines interact with surface Au(0) atoms of the nanoparticles with their lone electron pair with a strength linearly correlating with their basicity corrected for steric hindrance. The kinetics of binding depends on the position of the gold atoms (flat surfaces or edges) while the mode of binding involves a single Au(0) with nitrogen sitting on top of it. A small fraction of surface Au(I) atoms, still present, is reduced by the amines yielding a much stronger Au(0)-RN.+ (RN. , after the loss of a proton) interaction. In this case, the mode of binding involves two Au(0) atoms with a bridging nitrogen placed between them. Stable Au nanoparticles, as those required for robust semisynthetic nanozymes preparation, are better obtained when the protein is involved (at least in part) in the reduction of the gold ions.

Green Colloidal Synthesis of MoS2 Nanoflakes

Currently, two approaches dominate the large-scale production of MoS2: liquid-phase exfoliation, referred to as the top-down approach, and bottom-up colloidal synthesis from molecular precursors. Known colloidal synthesis approaches utilize toxic precursors. Here, an alternative green route for the bottom-up synthesis of MoS2 nanoflakes (NFs) is described. The NFs were synthesized by colloidal synthesis using [Mo(CH3COO)2]2 and a series of sulfur (S)-precursors including thioacetamide (TAA), 3-mercaptopropionic acid (3-MPA), l-cysteine (L-CYS), mercaptosuccinic acid (MSA), 11-mercaptoundecanoic acid (MUA), 1-dodecanethiol (DDTH), and di-tert-butyl disulfide (DTBD). While TAA, an S-precursor most commonly used for MoS2 NF preparation, is a known carcinogen, the other investigated S-precursors have low or no known toxicity. High-resolution scanning transmission electron microscopy (HR-STEM) and grazing incidence wide-angle X-ray scattering (GIWAXS) confirmed that in all cases, the syntheses yielded single-layer MoS2 NFs with lateral sizes smaller than 15 nm and a well-defined crystal structure. Electronic absorption and Raman spectra showed characteristic features associated with the MoS2 monolayers. The evolution of the absorption spectra of the growth solution during the syntheses reveals how the kinetics of the NF formation is affected by the S-precursor as well as the nature of the coordinating ligands.

Labelling strategies for correlative light electron microscopy

Imaging is one of the key technologies underpinning discoveries in biomedical research. Each imaging technique however usually only provides a specific type of information. For instance, live-cell imaging using fluorescent tags can show us the dynamics of a system. On the other hand, electron microscopy (EM) gives us better resolution combined with the structural reference space. By applying a combination of light and electron microscopy modalities to a single sample one can exploit the advantages of both techniques in correlative light electron microscopy (CLEM). Although CLEM approaches can generate additional insights into the sample that cannot be gained by either technique in isolation, the visualization of the object of interest via markers or probes is still one of the bottlenecks in a Correlative Microscopy workflow. Whereas fluorescence is not directly visible in a standard electron microscope, gold particles, as the most common choice of probe for EM can also only be visualized using specialized light microscopes. In this review we will discuss some of the latest developments of probes for CLEM and some strategies how to choose a probe, discussing pros and cons of specific probes, and ensuring that they function as a dual modality marker.

Two-Dimensional Metal Nanostructures: From Theoretical Understanding to Experiment

This paper reviews recent studies on the preparation of two-dimensional (2D) metal nanostructures, particularly nanosheets. As metal often exists in the high-symmetry crystal phase, such as face centered cubic structures, reducing the symmetry is often needed for the formation of low-dimensional nanostructures. Recent advances in characterization and theory allow for a deeper understanding of the formation of 2D nanostructures. This Review firstly describes the relevant theoretical framework to help the experimentalists understand chemical driving forces for the synthesis of 2D metal nanostructures, followed by examples on the shape control of different metals. Recent applications of 2D metal nanostructures, including catalysis, bioimaging, plasmonics, and sensing, are discussed. We end the Review with a summary and outlook of the challenges and opportunities in the design, synthesis, and application of 2D metal nanostructures.

Effective Blue Light-Absorbing AuAg Nanoparticles in InP Quantum Dots-Based Color Conversion

In typical color-by-blue mode-based quantum dot (QD) display devices, only part of the blue excitation light is absorbed by QD emitters, thus it is accompanied by the leakage of blue light through the devices. To address this issue, we offer, for the first time, the applicability of AuAg alloy nanoparticles (NPs) as effective blue light absorbers in InP QD-based color-by-blue platforms. For this, high-quality fluorescent green and red InP QDs with a double shell scheme of ZnSe/ZnS were synthesized and embedded in a transparent polymer film. Separately, a series of Au/Ag ratio-varied AuAg NPs with tunable plasmonic absorption peaks were synthesized. Among them, AuAg NPs possessing the most appropriate absorption peak with respect to spectral overlap with blue emission are chosen for the subsequent preparation of AuAg NP polymeric films with varied NP concentrations. A stack of AuAg NP polymeric film on top of InP QD film is then placed remotely on a blue light-emitting diode, successfully resulting in systematically progressive suppression of blue light leakage with increasing AuAg NP concentration. Furthermore, the beneficial function of the AuAg NP polymeric overlayer in mitigating undesirable QD excitation upon exposure to ambient lights was further examined.

Three-in-One Strategy to Improve Both Catalytic Activity and Selectivity: Nonconcentric Pd-Au Nanoparticles

In direct H₂O₂ synthesis, the Pd-Au alloy was considered as a potential catalyst because of its much better performance compared to the prototype Pd; unfortunately, achieving both high activity and selectivity remains a challenge. Here, we synthesized nonconcentric Pd-Au NPs in which Au domain shells are formed only partially on Pd domain cores and tested them for direct H₂O₂ synthesis. It has three exposed regions of Pd, Au domains, and Pd-Au interfaces in a single NP (hence, a 3-in-1 strategy). Creating nonconcentric forms was demonstrated convincingly by density functional theory calculations. The nonconcentric Pd-Au particles exhibit high and well-balanced performances that are hard to achieve with traditional alloyed Pd-Au. The number of Pd/Au interfaces was found to be the key factor and thus was optimized by controlling the Au precursor concentrations. The hitherto underutilized structure of nonconcentric bimetallic alloys can be useful and thus should be more actively investigated for catalyst development.

Galvanic replacement synthesis of multi-branched gold nanocrystals for photothermal cancer therapy

We present a facile organic phase synthesis method for producing multi-branched gold nanocrystals (nanostars) with a broad localized surface plasmon resonance (LSPR) across near-infrared (NIR) to short-wave infrared (SWIR) wavelengths. In this approach, galvanic replacement of copper by gold, in seed particles produced in situ, initiates growth of multi-branched structures. The method enables broad tuning of the LSPR energy by manipulating the branch length, with peak LSPR absorbance tuned from 850 to 1880 nm, reaching SWIR wavelengths covering the second and third optical transparency windows in biological media, rarely achieved with noble metal plasmonic nanostructures. After a ligand-exchange process, the gold nanostars readily disperse in water while retaining their LSPR absorbance. The multi-branched Au nanocrystals (NCs) exhibit exceptionally high photothermal transduction efficiency, exceeding that of Au nanorods and nanoparticles, to which we make direct comparisons here. At the same time, their synthesis is much more straightforward than hollow structures like nanocages, nanoshells, and nanomatryoshkas that can also exhibit high photothermal efficiency at NIR wavelengths. In vitro photothermal heating of multi-branched Au NCs in the presence of human cervical cancer cells causes effective cell ablation after 10 min laser irradiation. Cell viability assays demonstrate that the NCs are biocompatible at doses required for photothermal therapy. These results suggest that the multi-branched Au NCs can serve as a new type of photothermal therapy agent and in other applications in which strong NIR to SWIR absorbers are needed.

Elucidating the role of precursors in synthesizing single crystalline lithium niobate nanomaterials: a study of effects of lithium precursors on nanoparticle quality

A number of solution-based procedures have been realized for the synthesis of lithium niobate (LiNbO3) nanoparticles (NPs). Relatively little is, however, known about the influences of the selection of lithium (Li) precursors on the resulting dimensions, shapes, crystallinity, and purity of the products. A comparative study is provided herein on the role of different Li precursors during the synthesis of LiNbO3 NPs. To the best of our knowledge, this study provides the first systematic comparison of the effects of various Li reagents on the preparation of LiNbO3 NPs through solvothermal processes. This solution-phase approach was tuned by the inclusion of Li precursors that either lacked carbon based anions (e.g., F-, Cl-, Br-, I-, OH-, NO3-, or SO42-) or contained carbon-based anions (e.g., C2H5O-, C2H3OO-, C5H7OO-, or CO32-). All other variables were held constant during the synthesis, such as reaction temperature, solvent, niobium precursor, and surfactants. The results of these studies suggest that the type of Li precursor selected plays an important role in nanoparticle formation, such as through controlling the uniformity, crystallinity, and aggregation of LiNbO3 NPs. The average diameter of the resulting NPs can also vary from ∼30 to ∼830 nm as a function of the Li reagent used in the synthesis. The selection of Li precursors also influences the phase purity of the products. This comparative study on the preparation of crystalline LiNbO3 NPs represents a critical step forward to understand the influences and roles of precursors in the design of synthetic processes for the preparation of a variety of alkali metal niobates (e.g., including NaNbO3 and KNbO3) and crystalline metal oxide-based NPs containing other transition metals (e.g., titanium, tantalum).

Green Synthesis and Characterization of Gold Nanoparticles Using Lignin Nanoparticles

With the development of nanotechnology, gold nanoparticles (Au NPs) have attracted enormous attention due to their special properties. The green synthesis of Au NPs from lignin would inspire the utilization of lignin and its related functional materials. In this study, a rapid preparation process of Au NPs was investigated by utilizing lignin nanoparticles (LNPs) under room temperature without chemical addition. The LNPs acted as a reducing agent, stabilizing agent, and template for the preparation of LNPs@AuNPs. The obtained LNPs@AuNPs were characterized by UV-Vis spectrum, Transmission Electron Microscope (TEM), and X-ray photoelectron spectroscopy (XPS). The possible mechanism was illustrated by Fourier Transform Infrared Spectroscopy (FT-IR), ³¹P, XPS, and UV analyses. The abundant hydroxyl groups (24.96 mmol/g) favored the preparation of Au NPs. Au NPs diameters of 10–30 nm were well dispersed in the LNPs. The optimal reaction conditions were a ratio of 10 mg of LNPs to 0.05 mmol HAuCl₄, room temperature, and a reaction time of 30 min. The LNPs@AuNPs exhibited excellent stability in the suspension for more than seven days. The reduction process could be related to the disruption of side chains of lignin, hydroxyl group oxidation, and hydroquinones and quinones from the comproportionation reaction. The LNPs@AuNPs would open a door for the design of Au NP/lignin-derived novel functional materials.

Single-Step Photochemical Formation of Near-Infrared-Absorbing Gold Nanomosaic within PNIPAm Microgels: Candidates for Photothermal Drug Delivery

This work demonstrates the dynamic potential for tailoring the surface plasmon resonance (SPR), size, and shapes of gold nanoparticles (AuNPs) starting from an Au(I) precursor, chloro(dimethyl sulfide)gold (I) (Au(Me2S)Cl), in lieu of the conventional Au(III) precursor hydrogen tetrachloroaurate (III) hydrate (HAuCl4). Our approach presents a one-step method that permits regulation of an Au(I) precursor to form either visible-absorbing gold nanospheres or near-infrared-window (NIRW)-absorbing anisotropic AuNPs. A collection of shapes is obtained for the NIR-absorbing AuNPs herein, giving rise to spontaneously formed nanomosaic (NIR-absorbing anisotropic gold nanomosaic, NIRAuNM) without a dominant geometry for the tesserae elements that comprise the mosaic. Nonetheless, NIRAuNM exhibited high stability; one test sample remains stable with the same SPR absorption profile 7 years post-synthesis thus far. These NIRAuNM are generated within thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) microgels, without the addition of any growth-assisting surfactants or reducing agents. Our directed-selection methodology is based on the photochemical reduction of a light-, heat-, and water-sensitive Au(I) precursor via a disproportionation mechanism. The NIRAuNM stabilized within the thermoresponsive microgels demonstrates a light-activated size decrease of the microgels. On irradiation with a NIR lamp source, the percent decrease in the size of the microgels loaded with NIRAuNM is at least five times greater compared to the control microgels. The concept of photothermal shrinkage of hybrid microgels is further demonstrated by the release of a model luminescent dye, as a drug release model. The absorbance and emission of the model dye released from the hybrid microgels are over an order of magnitude higher compared to the absorbance and emission of the dye released from the unloaded-control microgels.

Precious metal recovery from electronic waste by a porous porphyrin polymer

Urban mining of precious metals from electronic waste, such as printed circuit boards (PCB), is not yet feasible because of the lengthy isolation process, health risks, and environmental impact. Although porous polymers are particularly effective toward the capture of metal contaminants, those with porphyrin linkers have not yet been considered for precious metal recovery, despite their potential. Here, we report a porous porphyrin polymer that captures precious metals quantitatively from PCB leachate even in the presence of 63 elements from the Periodic Table. The nanoporous polymer is synthesized in two steps from widely available monomers without the need for costly catalysts and can be scaled up without loss of activity. Through a reductive capture mechanism, gold is recovered with 10 times the theoretical limit, reaching a record 1.62 g/g. With 99% uptake taking place in the first 30 min, the metal adsorbed to the porous polymer can be desorbed rapidly and reused for repetitive batches. Density functional theory (DFT) calculations indicate that energetically favorable multinuclear-Au binding enhances adsorption as clusters, leading to rapid capture, while Pt capture remains predominantly at single porphyrin sites.

Functionalization of Gold Nanoparticles by Inorganic Entities

The great affinity of gold surface for numerous electron-donating groups has largely contributed to the rapid development of functionalized gold nanoparticles (Au-NPs). In the last years, a new subclass of nanocomposite has emerged, based on the association of inorganic molecular entities (IME) with Au-NPs. This highly extended and diversified subclass was promoted by the synergy between the intrinsic properties of the shell and the gold core. This review-divided into four main parts-focuses on an introductory section of the basic notions related to the stabilization of gold nanoparticles and defines in a second part the key role played by the functionalizing agent. Then, we present a wide range of inorganic molecular entities used to prepare these nanocomposites (NCs). In particular, we focus on four different types of inorganic systems, their topologies, and their current applications. Finally, the most recent applications are described before an overview of this new emerging field of research.

Direct Synthesis of Water-Dispersible Magnetic/Plasmonic Heteronanostructures for Multimodality Biomedical Imaging

Magnetic/plasmonic hybrid nanoparticles are highly desirable for multimodal bioimaging and biosensing. Although the synthesis of heterodimeric nanoparticles has been reported, the products are usually hydrophobic so that post-treatment procedures are required to transfer them into water which are often difficult to perform and cause damages to the structures. Direct synthesis of hydrophilic hybrid nanostructures has remained a grand challenge albeit its immediate advantage of biocompatibility. Herein we report a general seed-mediated approach to the synthesis of hydrophilic and biocompatible M-Fe₃O₄ (M = Au, Ag, and Pd) heterodimers, in which the size of metals and Fe₃O₄ can be independently regulated in a wide range. Benefiting from the aqueous synthesis, this approach can be further extended to design more complex heterodimeric structures such as AgPt_alloy-Fe₃O₄, Au_core@Pd_shell-Fe₃O₄, and Au_shell-Fe₃O₄. The hydrophilic nature of our heterodimers makes them readily useful for biomedical applications without the need of additional ligand exchange processes in contrast to those prepared in nonpolar solvents. These nanoscale magnetic/plasmonic heterostructures were shown to be ideally suited for integrated biomedical diagnoses, such as magnetic resonance imaging, photoacoustic imaging, optical coherence tomography, and computed tomography, in virtue of their biocompatibility and combined tunable magnetic and plasmonic properties.

Low-Temperature Vapor-Phase Synthesis of Single-Crystalline Gold Nanostructures: Toward Exceptional Electrocatalytic Activity for Methanol Oxidation Reaction

Au nanostructures (Au NSs) have been considered promising materials for applications in fuel cell catalysis, electrochemistry, and plasmonics. For the fabrication of high-performance Au NS-based electronic or electrochemical devices, Au NSs should have clean surfaces and be directly supported on a substrate without any mediating molecules. Herein, we report the vapor-phase synthesis of Au NSs on a fluorine-doped tin oxide (FTO) substrate at 120 °C and their application to the electrocatalytic methanol oxidation reaction (MOR). By employing AuCl as a precursor, the synthesis temperature for Au NSs was reduced to under 200 °C, enabling the direct synthesis of Au NSs on an FTO substrate in the vapor phase. Considering that previously reported vapor-phase synthesis of Au NSs requires a high temperature over 1000 °C, this proposed synthetic method is remarkably simple and practical. Moreover, we could selectively synthesize Au nanoparticles (NPs) and nanoplates by adjusting the location of the substrate, and the size of the Au NPs was controllable by changing the reaction temperature. The synthesized Au NSs are a single-crystalline material with clean surfaces that achieved a high methanol oxidation current density of 14.65 mA/cm² when intimately supported by an FTO substrate. We anticipate that this novel synthetic method can widen the applicability of vapor-phase synthesized Au NSs for electronic and electrochemical devices.

Investigation of antisolvent effect on gold nanoparticles during postsynthesis purification

Gold nanoparticles (Au NPs) were synthesized by reducing HAuCl₄ using borane tert-butylamine complex in the presence of alkylamine (dodecylamine, hexadecylamine, and octadecylamine) and didodecyldimethylammonium bromide. Ethanol was used as an antisolvent for the postsynthesis purification of Au NPs. Au NPs had uniform size distribution after first wash with ethanol and the aggregation and growth of Au NPs happened after second wash with ethanol. The Au NPs were characterized by TEM, SEM, XRD, ¹H NMR, UV-vis absorption and FTIR spectroscopy. The aggregated mechanism after the second wash with ethanol was proposed. Au NPs still retained their monodispersity after second wash compared with after first wash using the antisolvents, such as acetonitrile, dimethyl sulfoxide and acetone. The presented results suggest that the good choice of antisolvent is critical for the postsynthesis purification of Au NPs.

A mechano-colloidal approach for the controlled synthesis of metal nanoparticles

We propose a mechano-colloidal approach marrying the attractive features of both mechanochemical and colloidal syntheses to produce well-defined Au nanoparticles.

Successful Synthesis of Gold Nanoparticles through Ultrasonic Spray Pyrolysis from a Gold(III) Nitrate Precursor and Their Interaction with a High Electron Beam

Herein, we report for the first time the successful preparation of a gold(III) nitrate [Au(NO3)3] water-based precursor for use in a bottom-up ultrasonic spray pyrolysis (USP) process. Due to its limited solubility in water, the precursor was prepared under reflux conditions with nitric acid (HNO3) as the solvent and ammonium hydroxide (NH4OH) as a neutralizer. This precursor enabled the USP synthesis of gold nanoparticles (AuNPs) and the in situ formation of low concentrations of NO2- and NO3- ions, which were caught directly in deionized water in a collection system. These ions were proven to act as stabilizers for the AuNPs. Investigations showed that the AuNPs were monodispersed and spherically shaped with a size distribution over three groups: the first contained 5.3 % AuNPs with diameters (2 r) <15 nm, the second contained 82.5 % AuNPs with 2 r between 15 and 200 nm, and the third contained 12.2 % AuNPs with 2 r>200 nm. UV/Vis spectroscopy revealed the maximum absorbance band of the AuNPs at λ=528 nm. Additionally, scanning transmission electron microscopy (STEM) observations of the smallest AuNPs (2 r<5 nm) revealed atomically resolved coalescence phenomena induced by interaction with the electron beam. Four stages of the particle-growth process were distinguished: 1) movement and rotation of the AuNPs; 2) necking mechanism; 3) orientated attachment at matching facets; 4) reshaping of the AuNPs by surface diffusion. This provided important insight into the formation/synthesis process of the AuNPs.

Oleylamine-Mediated Hydrothermal Growth of Millimeter-Long Cu Nanowires and Their Electrocatalytic Activity for Reduction of Nitrate

While high-aspect-ratio metal nanowires are essential for producing nanowire-based electrodes of good performance used in electronics and electrocatalysis, the synthesis of millimeter-long Cu nanowires remains a challenge. This work demonstrates an oleylamine-mediated hydrothermal method for synthesis of Cu nanowires with an average diameter of ~80 nm and a length up to several millimeters. An investigation on the role of oleylamine in nanowire formation by mass spectroscopy, small angle X-ray diffraction and transmission electron microscopy reveals that oleylamine serves as a mild reducing agent for slow reduction of Cu(II) to Cu, a complexing agent to form Cu(II)-oleylamine complex for guiding the nanowire growth, as well as a surfactant to generate lamellar phase structure for the formation of nanowire bundles. The growth mechanism of these millimeter-long Cu nanowire bundles is proposed based on the experimental observations. Electrochemical measurements by linear sweep voltammetry indicate that the self-supported nanowire electrode prepared from as-formed Cu nanowire bundles shows high catalytic activity for electroreduction of nitrate in water.

Size-Dependent Phase Transfer Functionalization of Gold Nanoparticles To Promote Well-Ordered Self-Assembly

We present a route for the functionalization of gold nanoparticles (AuNP) based on phase transfer functionalization in order to optimize the stability and the potential for self-assembly. Depending on the desired size, different ligand exchanges have to be employed: The maximum AuNP size that can be stabilized without concentration loss is 46 nm for polystyrene-based ligands with 5 and 10 kDa. Small particles <12 nm are better stabilized by smaller ligands. We are able to demonstrate that well-ordered close-packed monolayers of 28 nm AuNP covering at least 400 μm² are possible with a potential for much larger areas. Such monolayers are of great interest for various fundamental experiments in the context of plasmonics and SERS and for sensor applications.

Controlled formation of gold nanostructures on biopolymer films upon electromagnetic radiation

The localized formation of gold nanostructures with controlled size and shape on chitosan films doped with gold precursor upon electromagnetic irradiation of various types is demonstrated here. Such controlled formation is achieved by tuning the wavelength, the energy and the interaction time of the radiation with the composite films. In particular, the use of a single UV nanosecond laser pulse results in the formation of gold sub-micron platelets with specific crystal structure, while increasing the number of pulses, further precursor reduction and photofragmentation induce the formation of gold nanoparticles. Using x-ray radiation as an alternative energy source, the reduction of the gold precursor and the subsequent formation of particles follow a different pathway. Specifically, x-ray-induced photo-reduction triggers the selective formation of gold sub-micron platelets with a very well defined {111} crystal phase. In this case, the density of crystal platelets increases by increasing the irradiation time of the films, while no photofragmentation process is observed. The gold structures pre-formed by x-ray radiation can be fragmented by subsequent pulsed UV laser irradiation forming nanoparticles with much narrower size distribution compared to that obtained via exclusive UV irradiation. Thanks to the perfect coupling between the natural polymeric matrix and gold nanostructures, the bionanocomposite systems developed could find various applications in biomaterial science and in biosensors field.

Nanoparticle design considerations for molecular imaging of apoptosis: Diagnostic, prognostic, and therapeutic value

The present review analyzes various approaches for the design and synthesis of different nanoparticles for imaging and therapy. Nanoparticles for computed tomography (CT), magnetic resonance imaging (MRI), positron emission tomography (PET) and optical imaging are discussed. The influence of nanoparticle size, shape, surface charge, composition, surface functionalization, active targeting and other factors on imaging and therapeutic efficacy is analyzed. Cyto- and genotoxicity of nanoparticles are also discussed. Special attention in the review is paid to the imaging of apoptotic tissues and cells in different diseases.

Advances in nanomaterials and their applications in point of care (POC) devices for the diagnosis of infectious diseases

Nanotechnology has gained much attention over the last decades, as it offers unique opportunities for the advancement of the next generation of sensing tools. Point-of-care (POC) devices for the selective detection of biomolecules using engineered nanoparticles have become a main research thrust in the diagnostic field. This review presents an overview on how the POC-associated nanotechnology, currently applied for the identification of nucleic acids, proteins and antibodies, might be further exploited for the detection of infectious pathogens: although still premature, future integrations of nanoparticles with biological markers that target specific microorganisms will enable timely therapeutic intervention against life-threatening infectious diseases.

An emulsion of pigmented nanoceria as a medicinal cosmetic

In this work, SnO₂functionalized graphene oxide was shown to possess high adsorption capacities and fast adsorption rates for organic dyes over wide pH ranges. Additionally, the adsorbent could be easily regenerated by washing with ethanol.

Gold over Branched Palladium Nanostructures for Photothermal Cancer Therapy

Bimetallic nanostructures show exciting potential as materials for effective photothermal hyperthermia therapy. We report the seed-mediated synthesis of palladium-gold (Pd-Au) nanostructures containing multiple gold nanocrystals on highly branched palladium seeds. The nanostructures were synthesized via the addition of a gold precursor to a palladium seed solution in the presence of oleylamine, which acts as both a reducing and a stabilizing agent. The interaction and the electronic coupling between gold nanocrystals and between palladium and gold broadened and red-shifted the localized surface plasmon resonance absorption maximum of the gold nanocrystals into the near-infrared region, to give enhanced suitability for photothermal hyperthermia therapy. Pd-Au heterostructures irradiated with an 808 nm laser light caused destruction of HeLa cancer cells in vitro, as well as complete destruction of tumor xenographs in mouse models in vivo for effective photothermal hyperthermia.

Tailoring indium oxide nanocrystal synthesis conditions for air-stable high-performance solution-processed thin-film transistors

Semiconducting metal oxides (ZnO, SnO2, In2O3, and combinations thereof) are a uniquely interesting family of materials because of their high carrier mobilities in the amorphous and generally disordered states, and solution-processed routes to these materials are of particular interest to the printed electronics community. Colloidal nanocrystal routes to these materials are particularly interesting, because nanocrystals may be formulated with tunable surface properties into stable inks, and printed to form devices in an additive manner. We report our investigation of an In2O3 nanocrystal synthesis for high-performance solution-deposited semiconductor layers for thin-film transistors (TFTs). We studied the effects of various synthesis parameters on the nanocrystals themselves, and how those changes ultimately impacted the performance of TFTs. Using a sintered film of solution-deposited In2O3 nanocrystals as the TFT channel material, we fabricated devices that exhibit field effect mobility of 10 cm(2)/(V s) and an on/off current ratio greater than 1 × 10(6). These results outperform previous air-stable nanocrystal TFTs, and demonstrate the suitability of colloidal nanocrystal inks for high-performance printed electronics.

Activated nanoporous carbon–gold nanoparticle composite electrode with enhanced volumetric capacitance

A novel preparation route of an activated nanoporous carbon, produced from abundant biomass, containing a fine dispersion of gold nanoparticles within the carbon microstructure and its application as a supercapacitor electrode material is presented.

Direct glucose sensing in the physiological range through plasmonic nanoparticle formation

An enzyme-free, non-invasive glucose assay is developed involving gold nanoparticle formation and shows glucose sensitivity in the range of 3–50 mM in urine.

Gelsolin bound β-amyloid peptides(1-40/1-42): electrochemical evaluation of levels of soluble peptide associated with Alzheimer's disease

A method for the highly sensitive determination of soluable β-amyloid peptides (Aβ(1-40/1-42)) that employs a detection bioconjugate of HRP-Au-gelsolin as the electrochemical nanoprobe is presented. Contrary to previous detection notions that utilized antibodies, which could specifically recognize the N- or C-terminus of peptides, we demonstrate herein that the reported specific binding between gelsolin and Aβ might provide an alternative way to evaluate the peptides sensitively and selectively. The HRP-Au-gelsolin nanohybrid was designed by one-pot functionalization of Au nanaoparticles (NPs) with horseradish peroxidase (HRP) and gelsolin. Through a sandwich-type sensor array, soluble Aβ(1-40/1-42) were captured onto the array due to the interactions between targeted peptides and surface-confined gelsolin and electrochemical signals were amplified by abundant attachments of HRP labeled on AuNPs, which could specifically catalyse its substrate, 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2 to give rise to measurable signals. The proposed gelsolin-bound Aβ methodology displayed satisfactory sensitivity and wide linear range towards Aβ(1-40/1-42) with a detection limit down to 28 pM, which are verified to be sensitive-enough for the assessment of Aβ levels both in normal and Alzheimer's disease (AD) rat brains. Experimental results indicated that compared with normal group, soluble β-amyloid peptide levels in cerebrospinal fluid (CSF) and targeted brain tissues of AD rats all declined with differentiable degrees. In short, the newly unfolding strategy presents valuable information related to pathological events in brain and will exhibit a braw perspective for the early diagnosis of AD process.

On the dual roles of ligands in the synthesis of colloidal metal nanostructures

Eloquent routes to colloidal metal nanostructures have emerged in recent years, and a central component to any successful nanosynthesis is the initial selection of metal complexes with an appropriate ligand environment. This local ligand environment may be predetermined by the coordination complex selected as the metal precursor; however, recent studies reveal that the ligand environment of coordination complexes can be modified through exchange with other components for the synthesis that include solvent molecules, capping agents, anions, and even reducing agents. Importantly, ligands can often play multiple roles in a synthesis and direct the outcome by manipulating the rates of precursor reduction and particle coalescence, providing colloidal and facet stabilization and even serving as reducing agents themselves. This Feature Article highlights examples in which the ligand environments of metal precursors and nanoparticles contribute to product formation in multiple ways. Acknowledgment of the dual roles of ligands in nanomaterial synthesis will enable new strategies for nanostructures by decoupling the often contradictory roles of ligands.

Multifunctional wearable devices for diagnosis and therapy of movement disorders

Wearable systems that monitor muscle activity, store data and deliver feedback therapy are the next frontier in personalized medicine and healthcare. However, technical challenges, such as the fabrication of high-performance, energy-efficient sensors and memory modules that are in intimate mechanical contact with soft tissues, in conjunction with controlled delivery of therapeutic agents, limit the wide-scale adoption of such systems. Here, we describe materials, mechanics and designs for multifunctional, wearable-on-the-skin systems that address these challenges via monolithic integration of nanomembranes fabricated with a top-down approach, nanoparticles assembled by bottom-up methods, and stretchable electronics on a tissue-like polymeric substrate. Representative examples of such systems include physiological sensors, non-volatile memory and drug-release actuators. Quantitative analyses of the electronics, mechanics, heat-transfer and drug-diffusion characteristics validate the operation of individual components, thereby enabling system-level multifunctionalities.

Lysozyme-stabilized gold nanoclusters as a novel fluorescence probe for cyanide recognition

Lysozyme-stabilized gold nanoclusters (Lys-AuNCs) have been synthesized and utilized as a fluorescent probe for selective detection of cyanide (CN(-)). Lys-AuNCs had an average size of 4 nm and showed a red emission at 650 nm (λex=370 nm). The fluorescence of Lys-AuNCs could be quenched by CN(-). An excellent sensitivity and selectivity toward the detection of CN(-) in aqueous solution was observed. The fluorescence intensity was linear with the CN(-) concentration in the range of 5.00×10(-6)M-1.20×10(-4) M with a detection limit as low as 1.9×10(-7) M. Also, the addition of CN(-) to Lys-AuNCs could induce an obvious color change from light yellow to colorless. Correspondingly, a bright red fluorescence disappeared and a blue fluorescence appeared. The results indicated that Lys-AuNCs could be applied in detection of cyanide on environmental aspects.