Monomer versus Alcohol Activation in the 4-Dimethylaminopyridine-Catalyzed Ring-Opening Polymerization of Lactide and LacticO-Carboxylic Anhydride

Bimetallic Manganese Catalysts: A Route to Controlled and Switchable Polymerization of Lactones

The sustainable solution to the environmental problem of polymeric materials calls for efficient and well-controlled ring-opening polymerization catalytic systems. Inspired by the highly reactive and stereospecific bimetallic catalysts, three kinds of bimetallic Salen-Mn catalysts supported by biaryl linking moieties are synthesized and applied to polymerization catalysis of lactide (LA) and ϵ-caprolactone (ϵ-CL) in this work. The polymerization is initiated in situ by the ring-opening of epoxide compounds, in which the ionic cocatalyst could accelerate the reaction process. The Mn-Mn coordination effect contributes to the higher activity and iso-selectivity towards LA compared to the mononuclear Salen-Mn catalyst. The reactivity and stereoselectivity are determined by the conformation of catalysts, specifically the Mn-Mn separation and dihedral angle. Finally, the CO2 -controlled switchable polymerizations are carried out with LA and ϵ-CL. The reversibility of the on-off switching operation is influenced by the combination between CO2 molecules and active species. The success in binuclear Salen-Mn catalysts not only expands the range of bimetallic catalyst analogues but also claims the promising potential of Mn-based catalysts in practical and theoretical research.

Enhancing the solubility and antimicrobial activity of cellulose through esterification modification using amino acid hydrochlorides

Most amino acid molecules have good water solubility and are rich in functional groups, which makes them a promising derivatizing agent for cellulose. However, self-condensation of amino acids and low reaction efficiency always happen during esterification. Here, amino acid hydrochloride ([AA]Cl) is selected as raw material to synthesize cellulose amino acid ester (CAE). Based on TG-MS coupling technology, a significantly faster reaction rate of [AA]Cl compared to raw amino acid can be observed visually. CAE with the degree of substitution 0.412-0.516 is facilely synthesized under 130-170 °C for 10-50 min. Moreover, the effects of amounts of [AA]Cl agent, temperature, and time on the esterification are studied. The CAE can be well dissolved in 7 wt% NaOH aq., resulting in a 7.5 wt% dope. The rheological test of the dope demonstrated a shear-thinning behavior for Newtonian-like fluid, and a high gel temperature (41.7 °C). Further, the synthesized products show distinct antibacterial activity and the bacteriostatic reduction rate against E. coli can reach 99.5 %.

Organocatalytic Ring-Opening Polymerization of ϵ-Caprolactone with Phosphoramidimidates (PADIs) as a Bifunctional Brønsted Acid Catalyst

In this study, an organocatalytic ring-opening polymerization (ROP) of ϵ-caprolactone (ϵ-CL) has been developed by employing PADIs as a novel and efficient acid/base bifunctional organocatalyst, which could afford metal-free poly(ϵ-caprolactone) with predictable molecular weight and narrow dispersity at a low catalyst loading under mild conditions. NMR and kinetic studies indicate that the ring-opening polymerizations of lactones catalyzed by PADIs proceed in a living and well controlled manner. Moreover, this organic Brønsted acid catalytic system could allow the synthesis of PCL with molecular weight above 60 kg/mol, as well as well-defined star polymers.

DFT Investigations on the Ring-Opening Polymerization of Trimethylene Carbonate Catalysed by Heterocyclic Nitrogen Bases

Organocatalysts for polymerization have known a huge interest over the last two decades. Among them, heterocyclic nitrogen bases are widely used to catalyse the ring-opening polymerization (ROP) of heterocycles such as cyclic carbonates. We have investigated the ring-opening polymerization of trimethylene carbonate (TMC) catalysed by DMAP (4-dimethylaminopyridine) and TBD (1,5,7-triazabicyclo[4.4.0]dec-5-ene) as case studies in the presence of methanol as co-initiator by Density Functional Theory (DFT). A dual mechanism based on H-bond activation of the carbonyl moieties of the monomer and a basic activation of the alcohol co-initiator has been shown to occur more preferentially than a direct nucleophilic attack of the carbonate monomer by the heterocyclic nitrogen catalyst. The rate-determining step of the mechanism is the ring opening of the TMC molecule, which is slightly higher than the nucleophilic attack of the TMC carbonyl by the activated alcohol. The calculations also indicate TBD as a more efficient catalyst than DMAP. The higher energy barrier found for DMAP vs. TBD, 23.7 vs. 11.3 kcal·mol−1, is corroborated experimentally showing a higher reactivity for the latter.

Cyclodextrin-Oligocaprolactone Derivatives-Synthesis and Advanced Structural Characterization by MALDI Mass Spectrometry

Cyclodextrins have previously been proven to be active in the catalysis of cyclic ester ring-opening reactions, hypothetically in a similar way to lipase-catalyzed reactions. However, the way they act remains unclear. Here, we focus on β-cyclodextrin's involvement in the synthesis and characterization of β-cyclodextrin-oligocaprolactone (CDCL) products obtained via the organo-catalyzed ring-opening of ε-caprolactone. Previously, bulk or supercritical carbon dioxide polymerizations has led to inhomogeneous products. Our approach consists of solution polymerization (dimethyl sulfoxide and dimethylformamide) to obtain homogeneous CDCL derivatives with four monomer units on average. Oligomerization kinetics, performed by a matrix-assisted laser desorption ionization mass spectrometry (MALDI MS) optimized method in tandem with 1H NMR, revealed that monomer conversion occurs in two stages: first, the monomer is rapidly attached to the secondary OH groups of β-cyclodextrin and, secondly, the monomer conversion is slower with attachment to the primary OH groups. MALDI MS was further employed for the measurement of the ring-opening kinetics to establish the influence of the solvents as well as the effect of organocatalysts (4-dimethylaminopyridine and (-)-sparteine). Additionally, the mass spectrometry structural evaluation was further enhanced by fragmentation studies which confirmed the attachment of oligoesters to the cyclodextrin and the cleavage of dimethylformamide amide bonds during the ring-opening process.

Rapid, controlled ring-opening polymerization of salicylic acid o-carboxyanhydride for poly(salicylate) synthesis

A fast synthesis pathway of poly(salicylate) in mild conditions was explored, in which the combination of Lewis base and alcohol enables salicylic acid o-carboxyanhydride polymerize in seconds to afford well-defined hompolymers with high Tg.

Synthesis of Sustainable Polyesters via Organocatalytic Ring-Opening Polymerization of O-carboxyanhydrides: Advances and Perspectives

Sustainable polyesters can be furnished via ring-opening polymerization (ROP) of O-carboxyanhydrides (OCAs). Various catalysts, especially metal-based catalysts, are devised to achieve controlled ROP of OCAs. In the following mini review, the recent progress on the organocatalytic ROP of OCAs, including the usage of thiourea-based bifunctional single-molecule organocatalysts for eliminating epimerization in OCAs polymerization is summarized. Moreover, the future development of the organocatalytic ROP of OCAs for the synthesis of sustainable polyesters will be discussed.

Synthesis of macrocyclic poly(α-hydroxyl acids) via DABCO-mediated ROP of O-carboxylanhydrides derived from l-phenylalanine even in the presence of an alcohol

On exploration of a catalytic system including simple 1,4-diazabicyclo-[2.2.2]octane (DABCO), triethylboron (TEB) and benzylalcohol (BnOH), a new pathway to achieve cyclic PAHAs was developed via ROP of OCAs.

DFT Modeling of Organocatalytic Ring-Opening Polymerization of Cyclic Esters: A Crucial Role of Proton Exchange and Hydrogen Bonding

Organocatalysis is highly efficient in the ring-opening polymerization (ROP) of cyclic esters. A variety of initiators broaden the areas of organocatalysis in polymerization of different monomers, such as lactones, cyclic carbonates, lactides or gycolides, ethylene phosphates and phosphonates, and others. The mechanisms of organocatalytic ROP are at least as diverse as the mechanisms of coordination ROP; the study of these mechanisms is critical in ensuring the polymer compositions and architectures. The use of density functional theory (DFT) methods for comparative modeling and visualization of organocatalytic ROP pathways, in line with experimental proof of the structures of the reaction intermediates, make it possible to establish these mechanisms. In the present review, which continues and complements our recent manuscript that focused on DFT modeling of coordination ROP, we summarized the results of DFT modeling of organocatalytic ROP of cyclic esters and some related organocatalytic processes, such as polyester transesterification.

Preparation, In Vivo and In Vitro Release of Polyethylene Glycol Monomethyl Ether-Polymandelic Acid Microspheres Loaded Panax Notoginseng Saponins

In order to enrich the types of Panax notoginseng saponins (PNS) sustained-release preparations and provide a new research idea for the research and development of traditional Chinese medicine sustained-release formulations, a series of Panax notoginseng saponins microspheres was prepared by a double emulsion method using a series of degradable amphiphilic macromolecule materials polyethylene glycol monomethyl ether-polymandelic acid (mPEG-PMA) as carrier. The structure and molecular weight of the series of mPEG-PMA were determined by nuclear magnetic resonance spectroscopy (1 HNMR) and gel chromatography (GPC). The results of the appearance, particle size, drug loading and encapsulation efficiency of the drug-loaded microspheres show that the mPEG10000-PMA (1:9) material is more suitable as a carrier for loading the total saponins of Panax notoginseng. The particle size was 2.51 ± 0.21 μm, the drug loading and encapsulation efficiency were 8.54 ± 0.16% and 47.25 ± 1.64%, respectively. The drug-loaded microspheres were used for in vitro release and degradation experiments to investigate the degradation and sustained release behaviour of the drug-loaded microspheres. The biocompatibility of the microspheres was studied by haemolytic, anticoagulant and cytotoxicity experiments. The pharmacological activity of the microspheres was studied by anti-inflammatory and anti-tumour experiments. The results showed that the drug-loaded microspheres could be released stably for about 12 days and degraded within 60 days. At the same time, the microspheres had good biocompatibility, anti-inflammatory and anti-tumour activities.

Understanding the Reactivity and Selectivity of Fluxional Chiral DMAP-Catalyzed Kinetic Resolutions of Axially Chiral Biaryls

Fluxional chiral DMAP-catalyzed kinetic resolutions of axially chiral biaryls were examined using density functional theory. Computational analyses lead to a revised understanding of this reaction in which the interplay of numerous non-covalent interactions control the conformation and flexibility of the active catalyst, the preferred mechanism, and the stereoselectivity. Notably, while the DMAP catalyst itself is confirmed to be highly fluxional, electrostatically driven π⋅⋅⋅π⁺ interactions render the active, acylated form of the catalyst highly rigid, explaining its pronounced stereoselectivity.

Highly isoselective ring-opening polymerization of rac-O-carboxyanhydrides using a zinc alkoxide initiator

A highly isoselective ROP system using just a zinc alkoxide as an initiator for the isoselective ROP of OCAs with the best P_m value of 0.97 at −70 °C.

Simple Lewis pairs of zinc salts and organobases as bifunctional catalysts for controlled ring-opening polymerization of O-carboxyanhydrides

Simple Lewis pairs consisting of organobases and zinc salts were explored to promote ring-opening polymerization of phenyl O-carboxyanhydride via bifunctional catalysis, producing well-defined poly(α-hydroxyalkanoic acid)s with good isotacticity (P_m = 0.88).

Living Ring-Opening Polymerization of O-Carboxyanhydrides: The Search for Catalysts

Biodegradable poly(α-hydroxy acids) can be synthesized by means of ring-opening polymerization (ROP) of O-carboxyanhydrides (OCAs). Numerous catalysts have been developed to control the living polymerization of OCAs. Here we review the rationale for the use of OCA, the desirable features for and important attributes of catalysts for the ROP of OCAs, and specific examples that have been developed.

Controlled organocatalyzed d,l-lactide ring-opening polymerizations: synthesis of low molecular weight oligomers

A systematic approach to the synthesis of organocatalyzed oligo(d,l-lactide) demonstrates that choice of initiator, catalytic ratio, and reaction time yields well-controlled oligomers. Ring-opening polymerization of d,l-lactide with the initiator α-methyl propargyl alcohol, a secondary alcohol, used in excess of 4-dimethylaminopyridine catalyst mitigates cyclicization, transesterification, and catalyst-initiated side reactions. This approach enables the design of uniform lactide oligomers for controlled release applications, such as delivery systems for drugs, prodrugs, and molecular sensors.

Organocatalyzed chemoselective ring-opening polymerizations

A novel metal-free and protecting-group-free synthesis method to prepare telechelic thiol-functionalized polyesters is developed by employing organocatalysis. A scope of Brønsted acids, including trifluoromethanesulfonic acid (1), HCl.Et2O (2), diphenyl phosphate (3), γ-resorcylic acid (4) and methanesulfonic acid (5), are evaluated to promote ring-opening polymerization of ε-caprolactone with unprotected 6-mercapto-1-hexanol as the multifunctional initiator. Among them, diphenyl phosphate (3) exhibits great chemoselectivity and efficiency, which allows for simply synthesis of thiol-terminated poly(ε-caprolactone) with near-quantitative thiol fidelity, full monomer conversion, controlled molecular weight and narrow polydispersity. Kinetic study confirms living/controlled nature of the organocatalyzed chemoselective polymerizations. Density functional theory calculation illustrates that the chemoselectivity of diphenyl phosphate (3) is attributed to the stronger bifunctional activation of monomer and initiator/chain-end as well as the lower energy in hydroxyl pathway than thiol one. Moreover, series of tailor-made telechelic thiol-terminated poly(δ-valerolactone) and block copolymers are efficiently generated under mild conditions.

An efficient strategy for achieving controlled ring-opening polymerization of O-carboxyanhydrides via amine initiation in collaboration with metal-alkoxide catalysis

Amines and Zn(C₆F₅)₂ for polymerization initiation and functionality transfer from Zn(C₆F₅)₂ to a metal-alkoxide species for promoting chain propagation to achieve well controlled ring-opening polymerization of O-carboxyanhydrides.

Poly(amino acid)-polyester graft copolymer nanoparticles for the acid-mediated release of doxorubicin

Biodegradable polymers have emerged as highly effective drug delivery vehicles. We combine N-carboxyanhydride and O-carboxyanhydride ring opening polymerisations to synthesise a poly(amino acid)-polyester graft copolymer capable of encapsulating, and subsequently releasing doxorubicin via acid-mediated hydrolysis. Consequently, the nanoparticles detailed are extremely promising vehicles for the controlled delivery of chemotherapeutic agents.

Synthesis of amine-bridged bis(phenolate) rare-earth metal aryloxides and their catalytic performances for the ring-opening polymerization of l-lactic acid O-carboxyanhydride and l-lactide

Rare-earth metal aryloxides were found as efficient initiators for the ring-opening polymerization of l-lactic acid O-carboxyanhydride and l-lactide. A comparative study on catalyst activities and reaction kinetics were conducted.

Polymers from sugars: cyclic monomer synthesis, ring-opening polymerisation, material properties and applications

This feature article gives an overview of sugar-based polymers that can be made by ring-opening-polymerisation and their applications.

Poly(α-hydroxy acid)s and poly(α-hydroxy acid-co-α-amino acid)s derived from amino acid

Polyesters derived from the α-hydroxy acids, lactic acid, and glycolic acid, are the most common biodegradable polymers in clinical use. These polymers have been tailored for a range of applications that require a physical material possessing. The physical and mechanical properties of these polymers fit the specific application and also safely biodegrade. These polymers are hydrophobic and do not possess functional side groups. This does not allow hydrophilic or hydrophobic manipulation, conjugation of active agents along the polymer chain, etc. These manipulations have partly been achieved by block copolymerization with, for example, poly(ethylene glycol), to obtain an amphiphilic copolymer. The objective of this review is to survey PLA functional copolymers in which functional α-hydroxy acids derived from amino acids are introduced along the polymer chain, allowing endless manipulation of PLA. Biodegradable functional polyesters are one of the most versatile biomaterials available to biomedical scientists. Amino acids with their variable side chains are ideal candidates for synthesizing such structural as well as stereochemically diverse polymers. They render control over functionalization, conjugation, crosslinking, stimulus responsiveness, and tunable mechanical/thermal properties. Functionalized amino acid derived polyesters are widely used, mainly due to advancement in ring opening polymerization (primarily O-carboxyanhydride mediated). The reaction proceeds under milder conditions and yields high molecular weight polymers. We reviewed on advances in the synthetic methodologies for poly-α-hydroxy esters derived from amino acids with appropriate recent examples.

4-Dialkylaminopyridine modified magnetic nanoparticles: as an efficient nano-organocatalyst for one-pot synthesis of 2-amino-4H-chromene-3-carbonitrile derivatives in water

A new DMAP-based magnetic nano-organocatalyst was developed for efficient one-pot synthesis of 2-amino-4H-chromene-3-carbonitrile derivatives in water as a green solvent.

Synthesis and biomedical applications of functional poly(α-hydroxy acids) via ring-opening polymerization of O-carboxyanhydrides

Poly(α-hydroxy acids) (PAHAs) are a class of biodegradable and biocompatible polymers that are widely used in numerous applications. One drawback of these conventional polymers, however, is their lack of side-chain functionalities, which makes it difficult to conjugate active moieties to PAHA or to fine-tune the physical and chemical properties of PAHA-derived materials through side-chain modifications. Thus, extensive efforts have been devoted to the development of methodology that allows facile preparation of PAHAs with controlled molecular weights and a variety of functionalities for widespread utilities. However, it is highly challenging to introduce functional groups into conventional PAHAs derived from ring-opening polymerization (ROP) of lactides and glycolides to yield functional PAHAs with favorable properties, such as tunable hydrophilicity/hydrophobicity, facile postpolymerization modification, and well-defined physicochemical properties. Amino acids are excellent resources for functional polymers because of their low cost, availability, and structural as well as stereochemical diversity. Nevertheless, the synthesis of functional PAHAs using amino acids as building blocks has been rarely reported because of the difficulty of preparing large-scale monomers and poor yields during the synthesis. The synthesis of functionalized PAHAs from O-carboxyanhydrides (OCAs), a class of five-membered cyclic anhydrides derived from amino acids, has proven to be one of the most promising strategies and has thus attracted tremendous interest recently. In this Account, we highlight the recent progress in our group on the synthesis of functional PAHAs via ROP of OCAs and their self-assembly and biomedical applications. New synthetic methodologies that allow the facile preparation of PAHAs with controlled molecular weights and various functionalities through ROP of OCAs are reviewed and evaluated. The in vivo stability, side-chain functionalities, and/or trigger responsiveness of several functional PAHAs are evaluated. Their biomedical applications in drug and gene delivery are also discussed. The ready availability of starting materials from renewable resources and the facile postmodification strategies such as azide-alkyne cycloaddition and the thiol-yne "click" reaction have enabled the production of a multitude of PAHAs with controlled molecular weights, narrow polydispersity, high terminal group fidelities, and structural diversities that are amenable for self-assembly and bioapplications. We anticipate that this new generation of PAHAs and their self-assembled nanosystems as biomaterials will open up exciting new opportunities and have widespread utilities for biological applications.

O-Carboxyanhydrides: Useful Tools for the Preparation of Well-Defined Functionalized Polyesters

Over the last ten years, O-carboxyanhydrides (OCA) have attracted increasing attention as ring-opening polymerization (ROP) monomers. They are readily available from α-hydroxyacids and are significantly more reactive than 1,4-dioxane-2,5-diones. Thus, softer catalysts and milder reaction conditions can be used, allowing for a better control of the polymerization. Most attractive are the functionalized OCA that enable the introduction of functional groups along the polyester backbone and thereby vary and finely tune their physicochemical properties. In this viewpoint, the achievements made over the last years are critically overviewed. Particular attention is paid to the different catalytic approaches that have been reported for the ROP of these heterocycles and to the comparison with lactide ROP. In addition, the most representative examples of functionalized polyesters and polymer conjugates prepared from OCA are discussed.

Adsorption and ring-opening of lactide on the chiral metal surface Pt(321)(S) studied by density functional theory

We study the adsorption and ring-opening of lactide on the naturally chiral metal surface Pt(321)(S). Lactide is a precursor for polylactic acid ring-opening polymerization, and Pt is a well known catalyst surface. We study, here, the energetics of the ring-opening of lactide on a surface that has a high density of kink atoms. These sites are expected to be present on a realistic Pt surface and show enhanced catalytic activity. The use of a naturally chiral surface also enables us to study potential chiral selectivity effects of the reaction at the same time. Using density functional theory with a functional that includes the van der Waals forces in a first-principles manner, we find modest adsorption energies of around 1.4 eV for the pristine molecule and different ring-opened states. The energy barrier to be overcome in the ring-opening reaction is found to be very small at 0.32 eV and 0.30 eV for LL- and its chiral partner DD-lactide, respectively. These energies are much smaller than the activation energy for a dehydrogenation reaction of 0.78 eV. Our results thus indicate that (a) ring-opening reactions of lactide on Pt(321) can be expected already at very low temperatures, and Pt might be a very effective catalyst for this reaction; (b) the ring-opening reaction rate shows noticeable enantioselectivity.